The P4 language has drastically changed the networking field as it allows to quickly describe and implement new networking applications. Although a large variety of applications can be described with the P4 language, current programmable switch architectures impose significant constraints on P4 programs. To address this shortcoming, FPGAs have been explored as potential targets for P4 applications. P4 applications are described using three abstractions: a packet parser, match-action tables, and a packet deparser, which reassembles the output packet with the result of the match-action tables. While implementations of packet parsers and match-action tables on FPGAs have been widely covered in the literature, no general design principles have been presented for the packet deparser. Indeed, implementing a high-speed and efficient deparser on FPGAs remains an open issue because it requires a large amount of interconnections and the architecture must be tailored to a P4 program. As a result, in several works where a P4 application is implemented on FPGAs, the deparser consumes a significant proportion of chip resources. Hence, in this paper, we address this issue by presenting design principles for efficient and high-speed deparsers on FPGAs. As an artifact, we introduce a tool that generates an efficient vendor-agnostic deparser architecture from a P4 program.Our design has been validated and simulated with a cocotb-based framework.The resulting architecture is implemented on Xilinx Ultrascale+ FPGAs and supports a throughput of more than 200 Gbps while reducing resource usage by almost 10x compared to other solutions.

The P4 language and the PISA architecture have revolutionized the field of networking. Thanks to P4 and PISA, new networking applications and protocols can be rapidly evaluated on high performance switches. While P4 allows the expression of a wide range of packet processing algorithms, current programmable switch architecture limit the overall processing flexibility. To address this shortcoming recent work have proposed to implement PISA on FPGAs. However, little effort has been devoted to analyze whether FPGAs are good candidates to implement PISA. In this work, we take a step back and evaluate the micro-architecture efficiency of various PISA blocks. Using a theoretical analysis and experiments, we demonstrate that current FPGA architecture drastically limit the performance of a few PISA blocks. Thus, we explore two avenues to alleviate these shortcomings. First, we identify some network applications that are well tailored to current FPGAs. Second, to support a wider range of networking applications, we propose modifications to the FPGA architecture which can also be of interest outside the networking field.

The emergence of P4, a domain specific language, coupled to PISA, a domain specific architecture, is revolutionizing the networking field. P4 allows to describe how packets are processed by a programmable data plane, spanning ASICs and CPUs, implementing PISA. Because the processing flexibility can be limited on ASICs, while the CPUs performance for networking tasks lag behind, recent works have proposed to implement PISA on FPGAs. However, little effort has been dedicated to analyze whether FPGAs are good candidates to implement PISA. In this work, we take a step back and evaluate the micro-architecture efficiency of various PISA blocks. We demonstrate, supported by a theoretical and experimental analysis, that the performance of a few PISA blocks is severely limited by the current FPGA architectures. Specifically, we show that match tables and programmable packet schedulers represent the main performance bottlenecks for FPGA-based programmable switches. Thus, we explore two avenues to alleviate these shortcomings. First, we identify network applications well tailored to current FPGAs. Second, to support a wider range of networking applications, we propose modifications to the FPGA architectures which can also be of interest out of the networking field.

High-Level Synthesis (HLS) brings FPGAs to audiences previously unfamiliar to hardware design. However, achieving the highest Quality-of-Results (QoR) with HLS is still unattainable for most programmers. This requires detailed knowledge of FPGA architecture and hardware design in order to produce FPGA-friendly codes. Moreover, these codes are normally in conflict with best coding practices, which favor code reuse, modularity, and conciseness. To overcome these limitations, we propose Module-per-Object (MpO), a human-driven HLS design methodology intended for both hardware designers and software developers with limited FPGA expertise. MpO exploits modern C++ to raise the abstraction level while improving QoR, code readability and modularity. To guide HLS designers, we present the five characteristics of MpO classes. Each characteristic exploits the power of HLS-supported modern C++ features to build C++-based hardware modules. These characteristics lead to high-quality software descriptions and efficient hardware generation. We also present a use case of MpO, where we use C++ as the intermediate language for FPGA-targeted code generation from P4, a packet processing domain specific language. The MpO methodology is evaluated using three design experiments: a packet parser, a flow-based traffic manager, and a digital up-converter. Based on experiments, we show that MpO can be comparable to handwritten VHDL code while keeping a high abstraction level, humanreadable coding style and modularity. Compared to traditional C-based HLS design, MpO leads to more efficient circuit generation, both in terms of performance and resource utilization. Also, the MpO approach notably improves software quality, augmenting parameterization while eliminating the incidence of code duplication.

Packet parsing is a key step in SDN-aware devices. Packet parsers in SDN networks need to be both reconfigurable and fast, to support the evolving network protocols and the increasing multi-gigabit data rates. The combination of packet processing languages with FPGAs seems to be the perfect match for these requirements. In this work, we develop an open-source FPGA-based configurable architecture for arbitrary packet parsing to be used in SDN networks. We generate low latency and high-speed streaming packet parsers directly from a packet processing program. Our architecture is pipelined and entirely modeled using templated \textttC++ classes. The pipeline layout is derived from a parser graph that corresponds to a P4 code after a series of graph transformation rounds. The RTL code is generated from the \textttC++ description using Xilinx Vivado HLS and synthesized with Xilinx Vivado. Our architecture achieves a \SI100 \giga\bit/\second data rate in a Xilinx Virtex-7 FPGA while reducing the latency by 45% and the LUT usage by 40% compared to the state-of-the-art.

The P4 community has recently put significant effort to increase the diversity of targets on which P4 programs can be implemented. These include fixed function and programmable ASICs, FPGAs, NICs, and CPUs. However, P4 programs are written according to the set of functionalities supported by the target for which they are compiled. For instance, a P4 program targeting a programmable ASIC cannot be extended with user-defined processing modules, which limits the flexibility and the abstraction of P4 programs. To address these shortcomings, we propose a heterogeneous P4 programmable data plane comprised of different targets that together appear as a single logical unit. The proposed data plane broadens the range of functionalities available to P4 programmers by combining the strength of each target. We demonstrate the feasibility of the proposed P4 data plane by coupling an FPGA with a soft switch which emulates a programmable ASIC. The proposed data plane is demonstrated with the implementation of a simplified L2 switch. The emulated ASIC match-table capacity is extended by the FPGA by an order of magnitude.The FPGA also integrates a proprietary module using a P4 extern.