The snake robot, which mimics the mechanism of real snakes, is expected to be used in various environments. This article addresses the challenge of snake robots autonomously adapting to and moving inside and outside pipes having complex shapes using a helical rolling motion. We consider that an irregular helical form can be defined as a combination of three components, namely the axis, cross-sectional shape, and pitch angle, and that it is easier to consider deformations that have compliance only in a specific direction. Our proposed method deforms the cross-sectional shape of the snake robot locally so that it adopts the shape of the pipe accurately. Experiments were conducted using our developed snake robot to verify the effectiveness of the proposed method, and it was demonstrated that the proposed method can be used for a snake robot moving inside and outside of straight pipes and outdoor tree, including those having noncircular and varying cross sections.

A snake robot performs diverse motions. To realize a wide range functions in a complex environment, it is necessary to transition between various motions suited to each environment. In this article, we propose a method of transitioning the motion of a snake robot across different environments to expand the application environment of the robot. We first find that the motion at the connection point between two motions must coincide with the tangential movement during motion transition across different environments. We then design a gait called the circular pedal wave. This circular pedal wave allows a hoop-passing motion in which the whole body moves as if it is passing through a virtual hoop fixed in space in sequence from its head through combination with a proposed shift part. The hoop-passing motion allows motion transition across different environments. We propose three application examples of this hoop-passing motion, namely passing through a hole in a wall, entering an underfloor, and attaching to a ladder. We report on experiments conducted to verify the effectiveness of the proposed method and to realize the described motions.

A method for designing the motion of a snake robot negotiating complicated pipe structures having a constant diameter is presented. For such robots moving inside pipes, there are various "obstacles" such as junctions, bends, shears, and blockages. To surmount these obstacles, we propose a method that enables the robot to adapt to multiple pipe structures of a constant diameter. We designed the target form of the snake robot of two helices connected with an arbitrary shape. This method is applicable to various obstacles by designing a part of the target form conforming to the obstacle. The robot negotiates obstacles under shift control by employing a rolling motion. We demonstrated the effectiveness of the proposed method in various experiments.

This paper presents a method that allows a snake robot to climb a ladder. We propose a ladder climbing method for a snake robot that has a smooth surface shape. We design a novel gait for the snake using a gait design method that configures the target form of the snake robot by connecting simple shapes. The climbing motion is executed via shift control and the corresponding motion required to catch the next step on the ladder. In addition, we developed a snake robot that has a smooth exterior body surface through construction of pectinate-shaped parts of the links. We demonstrated the effectiveness of both the proposed gait and the design of the snake robot experimentally.

This paper presents a method for designing the gait of a snake robot that moves in a complicated environment. We propose a method for expressing the target form of a snake robot by connecting curve segments whose curvature and torsion are already known. Because the characteristics of each combined shape are clear, we can design the target form intuitively and approximate a snake robot configuration to this form with low computational cost. In addition, we propose two novel gaits for the snake robot as a design example of the proposed method. The first gait is aimed at moving over a flange on a pipe, while the other is the crawler gait aimed at moving over rough terrain. We demonstrated the effectiveness of the two gaits on a pipe and rough terrain in experiments.