Investigations are carried out on the performance of video transmission systems employing square wave frequency modulation (SWFM). A simple formula for the signal-to-noise ratio (SNR) in the SWFM video transmission systems is derived. The SNR performance is compared to that of frequency modulation (FM) and pulse frequency modulation (PFM). SWFM is shown to display the greatest receiver sensitivity when the fiber 6 dB bandwidth is less than 100 MHz. Video transmission experiments demonstrate the advantages of the SWFM, including 1) degree of simplicity in modulation/demodulation circuits as well as in optical transmitter and receiver circuits, 2) tolerance to nonlinearities in the system, and 3) insensitivity to the fiber baseband frequency-phase characteristics. Both the theoretical and experimental results have made clear the superiority of SWFM optical video transmission systems in application to CATV distribution systems and subscriber loop systems.

Investigations are carried out on the SNR performance in fiber optic FM transmission systems which use multimode fibers and 1.3 μm laser diodes. Both laser diode noise and modal noise are quantitatively evaluated in systems with and without employing a superimposed pulse modulation scheme. Based on these investigations, parameters for analog-digital hybrid signal transmission systems employing FM are determined. The hybrid signal consists of audio, video, and 2 Mbit/s digital data. The results obtained in transmission experiments satisfied the design objectives and confirmed the technical feasibility of an analog-digital hybrid transmission employing FM. The obtained results make the fiber optic FM transmission system with a 1.3\mumLD an attractive alternative in subscriber systems, and video transmission systems for microwave IF links and CATV trunks.