Training fingerprint recognition models using synthetic data has recently gained increased attention in the biometric community as it alleviates the dependency on sensitive personal data. Existing approaches for fingerprint generation are limited in their ability to generate diverse impressions of the same finger, a key property for providing effective data for training recognition models. To address this gap, we present FPGAN-Control, an identity preserving image generation framework which enables control over the fingerprint’s image appearance (e.g., fingerprint type, acquisition device, pressure level) of generated fingerprints. We introduce a novel appearance loss that encourages disentanglement between the fingerprint’s identity and appearance properties. In our experiments, we used the publicly available NIST SD302 (N2N) dataset for training the FPGAN-Control model. We demonstrate the merits of FPGAN-Control, both quantitatively and qualitatively, in terms of identity preservation level, degree of appearance control, and low synthetic-to-real domain gap. Finally, training recognition models using only synthetic datasets generated by FPGAN-Control lead to recognition accuracies that are on par or even surpass models trained using real data. To the best of our knowledge, this is the first work to demonstrate this.

A major impediment to researchers working in the area of fingerprint recognition is the lack of publicly available, large-scale, fingerprint datasets. The publicly available datasets that do exist contain very few identities and impressions per finger. This limits research on a number of topics, including e.g., using deep networks to learn fixed length fingerprint embeddings. Therefore, we propose PrintsGAN, a synthetic fingerprint generator capable of generating unique fingerprints along with multiple impressions for a given fingerprint. Using PrintsGAN, we synthesize a database of 525k fingerprints (35K distinct fingers, each with 15 impressions). Next, we show the utility of the PrintsGAN generated dataset by training a deep network to extract a fixed-length embedding from a fingerprint. In particular, an embedding model trained on our synthetic fingerprints and fine-tuned on a small number of publicly available real fingerprints (25K prints from NIST SD 302) obtains a TAR of 87.03% @ FAR=0.01% on the NIST SD4 database (a boost from TAR=73.37% when only trained on NIST SD 302). Prevailing synthetic fingerprint generation methods do not enable such performance gains due to i) lack of realism or ii) inability to generate multiple impressions per finger. Our dataset is released to the public: https://biometrics.cse.msu.edu/Publications/Databases/MSU_PrintsGAN/.

In many of the least developed and developing countries, a multitude of infants continue to suffer and die from vaccine-preventable diseases and malnutrition. Lamentably, the lack of official identification documentation makes it exceedingly difficult to track which infants have been vaccinated and which infants have received nutritional supplements. Answering these questions could prevent this infant suffering and premature death around the world. To that end, we propose Infant-Prints, an end-to-end, low-cost, infant fingerprint recognition system. Infant-Prints is comprised of our (i) custom built, compact, low-cost (85 USD), high-resolution (1,900 ppi), ergonomic fingerprint reader, and (ii) high-resolution infant fingerprint matcher. To evaluate the efficacy of Infant-Prints, we collected a longitudinal infant fingerprint database captured in 4 different sessions over a 12-month time span (December 2018 to January 2020), from 315 infants at the Saran Ashram Hospital, a charitable hospital in Dayalbagh, Agra, India. Our experimental results demonstrate, for the first time, that Infant-Prints can deliver accurate and reliable recognition (over time) of infants enrolled between the ages of 2-3 months, in time for effective delivery of vaccinations, healthcare, and nutritional supplements (TAR=95.2% @ FAR = 1.0% for infants aged 8-16 weeks at enrollment and authenticated 3 months later).

Matching contactless fingerprints or finger photos to contact-based fingerprint impressions has received increased attention in the wake of COVID-19 due to the superior hygiene of the contactless acquisition and the widespread availability of low cost mobile phones capable of capturing photos of fingerprints with sufficient resolution for verification purposes. This paper presents an end-to-end automated system, called C2CL, comprised of a mobile finger photo capture app, preprocessing, and matching algorithms to handle the challenges inhibiting previous cross-matching methods; namely i) low ridge-valley contrast of contactless fingerprints, ii) varying roll, pitch, yaw, and distance of the finger to the camera, iii) non-linear distortion of contact-based fingerprints, and vi) different image qualities of smartphone cameras. Our preprocessing algorithm segments, enhances, scales, and unwarps contactless fingerprints, while our matching algorithm extracts both minutiae and texture representations. A sequestered dataset of 9, 888 contactless 2D fingerprints and corresponding contact-based fingerprints from 206 subjects (2 thumbs and 2 index fingers for each subject) acquired using our mobile capture app is used to evaluate the cross-database performance of our proposed algorithm. Furthermore, additional experimental results on 3 publicly available datasets show substantial improvement in the state-of-the-art for contact to contactless fingerprint matching (TAR in the range of 96.67% to 98.30% at FAR=0.01%).

Typical fingerprint recognition systems are comprised of a spoof detection module and a subsequent recognition module, running one after the other. In this paper, we reformulate the workings of a typical fingerprint recognition system. In particular, we posit that both spoof detection and fingerprint recognition are correlated tasks. Therefore, rather than performing the two tasks separately, we propose a joint model for spoof detection and matching1to simultaneously perform both tasks without compromising the accuracy of either task. We demonstrate the capability of our joint model to obtain an authentication accuracy (1:1 matching) of TAR = 100% @ FAR = 0.1% on the FVC 2006 DB2A dataset while achieving a spoof detection ACE of 1.44% on the LiveDet 2015 dataset, both maintaining the performance of stand-alone methods. In practice, this reduces the time and memory requirements of the fingerprint recognition system by 50% and 40%, respectively; a significant advantage for recognition systems running on resource-constrained devices and communication channels.

We present DeepPrint, a deep network, which learns to extract fixed-length fingerprint representations of only 200 bytes. DeepPrint incorporates fingerprint domain knowledge, including alignment and minutiae detection, into the deep network architecture to maximize the discriminative power of its representation. The compact, DeepPrint representation has several advantages over the prevailing variable length minutiae representation which (i) requires computationally expensive graph matching techniques, (ii) is difficult to secure using strong encryption schemes (e.g., homomorphic encryption), and (iii) has low discriminative power in poor quality fingerprints where minutiae extraction is unreliable. We benchmark DeepPrint against two top performing COTS SDKs (Verifinger and Innovatrics) from the NIST and FVC evaluations. Coupled with a re-ranking scheme, the DeepPrint rank-1 search accuracy on the NIST SD4 dataset against a gallery of 1.1 million fingerprints is comparable to the top COTS matcher, but it is significantly faster (DeepPrint: 98.80% in 0.3 seconds vs. COTS A: 98.85% in 27 seconds). To the best of our knowledge, the DeepPrint representation is the most compact and discriminative fixed-length fingerprint representation reported in the academic literature.

Prevailing evaluations of fingerprint recognition systems have been performed as end-to-end black-box tests of fingerprint identification or authentication accuracy. However, performance of the end-to-end system is subject to errors arising in any of its constituent modules, including: fingerprint scanning, preprocessing, feature extraction, and matching. Conversely, white-box evaluations provide a more granular evaluation by studying the individual subcomponents of a system. While a few studies have conducted stand-alone evaluations of the fingerprint reader and feature extraction modules of fingerprint recognition systems, little work has been devoted towards white-box evaluations of the fingerprint matching module. We report results of a controlled, white-box evaluation of one open-source and two commercial-off-the-shelf (COTS) minutiae-based matchers in terms of their robustness against controlled perturbations (random noise and non-linear distortions) introduced into the input minutiae feature sets. Our white-box evaluations reveal that the performance of fingerprint minutiae matchers are more susceptible to non-linear distortion and missing minutiae than spurious minutiae and small positional displacements of the minutiae locations.

Evaluation of large-scale fingerprint search algorithms has been limited due to lack of publicly available datasets. To address this problem, we utilize a Generative Adversarial Network (GAN) to synthesize a fingerprint dataset consisting of 100 million fingerprint images. In contrast to existing fingerprint synthesis algorithms, we incorporate an identity loss which guides the generator to synthesize fingerprints corresponding to more distinct identities. The characteristics of our synthesized fingerprints are shown to be more similar to real fingerprints than existing meth- ods via eight different metrics (minutiae count - block and template, minutiae direction - block and template, minutiae convex hull area, minutiae spatial distribution, block minutiae quality distribution, and NFIQ 2.0 scores). Additionally, the synthetic fingerprints based on our approach are shown to be more distinct than synthetic fingerprints based on published methods through search results and imposter distribution statistics. Finally, we report for the first time in open literature, search accuracy against a gallery of 1 00 million fingerprints (NIST SD4 Rank-1 accuracy of 89.7%).

We open source an easy to assemble, spoof resistant, high resolution, optical fingerprint reader, called RaspiReader, using ubiquitous components. By using our open source STL files and software, RaspiReader can be built in under one hour for only US $175. As such, RaspiReader provides the fingerprint research community a seamless and simple method for quickly prototyping new ideas involving fingerprint reader hardware. In particular, we posit that this open source fingerprint reader will facilitate the exploration of novel fingerprint spoof detection techniques involving both hardware and software. We demonstrate one such spoof detection technique by specially customizing RaspiReader with two cameras for fingerprint image acquisition. One camera provides high contrast, frustrated total internal reflection (FTIR) fingerprint images, and the other outputs direct images of the finger in contact with the platen. Using both of these image streams, we extract complementary information which, when fused together and used for spoof detection, results in marked performance improvement over previous methods relying only on grayscale FTIR images provided by COTS optical readers. Finally, fingerprint matching experiments between images acquired from the FTIR output of RaspiReader and images acquired from a COTS reader verify the interoperability of the RaspiReader with existing COTS optical readers.

We present the design and manufacturing of high-fidelity universal 3D fingerprint targets, which can be imaged on a variety of fingerprint sensing technologies, namely, capacitive, contact optical, and contactless optical. Universal 3D fingerprint targets enable, for the first time, not only a repeatable and controlled evaluation of fingerprint readers but also the ability to conduct fingerprint reader interoperability studies. Fingerprint reader interoperability refers to how robust fingerprint recognition systems are to variations in the images acquired by different types of fingerprint readers. To build universal 3D fingerprint targets, we adopt a molding and casting framework consisting of: 1) digital mapping of fingerprint images to a negative mold; 2) CAD modeling a scaffolding system to hold the negative mold; 3) fabricating the mold and scaffolding system with a high resolution 3D printer; 4) producing or mixing a material with similar electrical, optical, and mechanical properties to that of the human finger; and 5) fabricating a 3D fingerprint target using controlled casting. Our experiments conducted with personal identity verification and Appendix F certified optical (contact and contactless) and capacitive fingerprint readers demonstrate the usefulness of universal 3D fingerprint targets for controlled and repeatable fingerprint reader evaluations and also fingerprint reader interoperability studies.