Real-time multi-agent collaboration for ego-motion estimation and high-fidelity 3D reconstruction is vital for scalable spatial intelligence. However, traditional methods produce sparse, low-detail maps, while recent dense mapping approaches struggle with high latency. To overcome these challenges, we present MAC-Ego3D, a novel framework for real-time collaborative photorealistic 3D reconstruction via Multi-Agent Gaussian Consensus. MAC-Ego3D enables agents to independently construct, align, and iteratively refine local maps using a unified Gaussian splat representation. Through Intra-Agent Gaussian Consensus, it enforces spatial coherence among neighboring Gaussian splats within an agent. For global alignment, parallelized Inter-Agent Gaussian Consensus, which asynchronously aligns and optimizes local maps by regularizing multi-agent Gaussian splats, seamlessly integrates them into a high-fidelity 3D model. Leveraging Gaussian primitives, MAC-Ego3D supports efficient RGB-D rendering, enabling rapid inter-agent Gaussian association and alignment. MAC-Ego3D bridges local precision and global coherence, delivering higher efficiency, largely reducing localization error, and improving mapping fidelity. It establishes a new SOTA on synthetic and real-world benchmarks, achieving a 15× increase in inference speed, order-of-magnitude reductions in egomotion estimation error for partial cases, and RGB PSNR gains of 4 to 10 dB. Our code is made publicly available at https://github.com/Xiaohao-Xu/MAC-Ego3D.

Despite recent advances in deep learning, most existing learning IMU odometry methods are trained on specific datasets, lack generalization, and are prone to overfitting, which limits their real-world application. To address these challenges, we present Tartan IMU, a foundation model designed for generalizable, IMU-based state estimation across diverse robotic platforms. Our approach consists of three-stage: First, a pre-trained foundation model leverages over 100 hours of multi-platform data to establish general motion knowledge, achieving 36% improvement in ATE over specialized models. Second, to adapt to previously unseen tasks, we use Low-Rank Adaptation (LoRA), allowing positive transfer with only 1.1 M trainable parameters. Finally, to support robotics deployment, we introduce online test-time adaptation, which eliminates the boundary between training and testing, allowing the model to continuously "learn as it operates" at 200 FPS in real-time. Project page: https://superodometry.com/tartanimu.

We aim to redefine robust ego-motion estimation and photorealistic 3D reconstruction by addressing a critical limitation: the reliance on noise-free data in existing models. While such sanitized conditions simplify evaluation, they fail to capture the unpredictable, noisy complexities of real-world environments. Dynamic motion, sensor imperfections, and synchronization perturbations lead to sharp performance declines when these models are deployed in practice, revealing an urgent need for frameworks that embrace and excel under real-world noise. To bridge this gap, we tackle three core challenges: scalable data generation, comprehensive benchmarking, and model robustness enhancement. First, we introduce a scalable noisy data synthesis pipeline that generates diverse datasets simulating complex motion, sensor imperfections, and synchronization errors. Second, we leverage this pipeline to create Robust-Ego3D, a benchmark rigorously designed to expose noise-induced performance degradation, highlighting the limitations of current learning-based methods in ego-motion accuracy and 3D reconstruction quality. Third, we propose Correspondence-guided Gaussian Splatting (CorrGS), a novel method that progressively refines an internal clean 3D representation by aligning noisy observations with rendered RGB-D frames from clean 3D map, enhancing geometric alignment and appearance restoration through visual correspondence. Extensive experiments on synthetic and real-world data demonstrate that CorrGS consistently outperforms prior state-of-the-art methods, particularly in scenarios involving rapid motion and dynamic illumination. We will release our code and benchmark to advance robust 3D vision, setting a new standard for ego-motion estimation and high-fidelity reconstruction in noisy environments.

Referring Image Segmentation (RIS), aims to segment the object referred by a given sentence in an image by understanding both visual and linguistic information. However, existing RIS methods tend to explore top-performance models, disregarding considerations for practical applications on resources-limited edge devices. This oversight poses a significant challenge for on-device RIS inference. To this end, we propose an effective and efficient post-training quantization framework termed PTQ4RIS. Specifically, we first conduct an in-depth analysis of the root causes of performance degradation in RIS model quantization and propose dual-region quantization (DRQ) and reorder-based outlier-retained quantization (RORQ) to address the quantization difficulties in visual and text encoders. Extensive experiments on three benchmarks with different bits settings (from 8 to 4 bits) demonstrates its superior performance. Importantly, we are the first PTQ method specifically designed for the RIS task, highlighting the feasibility of PTQ in RIS applications. The code is available at https://github.com/gugu511yy/PTQ4RIS.

Map-based LiDAR localization, while widely used in autonomous systems, faces significant challenges in degraded environments due to the lack of distinct geometric features. This paper introduces SuperLoc, a robust LiDAR localization package that addresses key limitations in existing methods. SuperLoc features a novel predictive alignment risk assessment technique, enabling early detection and mitigation of potential failures before optimization. This approach significantly improves performance in challenging scenarios such as corridors, tunnels, and caves. Unlike existing degeneracy mitigation algorithms that rely on post-optimization analysis and heuristic thresholds, SuperLoc evaluates the localizability of raw sensor measurements. Experimental results demonstrate significant performance improvements over state-of-the-art methods across various degraded environments. Our approach achieves a 54% increase in accuracy and exhibits better robustness. To facilitate further research, we release our implementation along with datasets from eight challenging scenarios.

Simultaneous localization and mapping (SLAM) is a fundamental task for numerous applications such as autonomous navigation and exploration. Despite many SLAM datasets have been released, current SLAM solutions still struggle to have sustained and resilient performance. One major issue is the absence of high-quality datasets including diverse all-weather conditions and a reliable metric for assessing robustness. This limitation significantly restricts the scalability and generalizability of SLAM technologies, impacting their development, validation, and deployment. To address this problem, we present SubT-MRS, an ex-tremely challenging real-world dataset designed to push SLAM towards all-weather environments to pursue the most robust SLAM performance. It contains multi-degraded en-vironments including over 30 diverse scenes such as structureless corridors, varying lighting conditions, and perceptual obscurants like smoke and dust; multimodal sensors such as LiDAR, fisheye camera, IMU, and thermal camera; and multiple locomotions like aerial, legged, and wheeled robots. We developed accuracy and robustness evaluation tracks for SLAM and introduced novel robustness metrics. Comprehensive studies are performed, revealing new obser-vations, challenges, and opportunities for future research.

This article surveys recent progress and discusses future opportunities for simultaneous localization and mapping (SLAM) in extreme underground environments. SLAM in subterranean environments, from tunnels, caves, and man-made underground structures on Earth, to lava tubes on Mars, is a key enabler for a range of applications, such as planetary exploration, search and rescue, disaster response, and automated mining, among others. SLAM in underground environments has recently received substantial attention, thanks to theDARPA Subterranean (SubT) Challenge, a global robotics competition aimed at assessing and pushing the state of the art in autonomous robotic exploration and mapping in complex underground environments. This article reports on the state of the art in underground SLAM by discussing different SLAM strategies and results across six teams that participated in the three-year-long SubT competition. In particular, the article has four main goals. First, we review the algorithms, architectures, and systems adopted by the teams; particular emphasis is put on light detection and ranging (LIDAR)-centric SLAM solutions (the go-to approach for virtually all teams in the competition), heterogeneous multirobot operation (including both aerial and ground robots), and real-world underground operation (from the presence of obscurants to the need to handle tight computational constraints). We do not shy away from discussing the “dirty details” behind the different SubT SLAM systems, which are often omitted from technical papers. Second, we discuss the maturity of the field by highlighting what is possible with the current SLAM systems and what we believe is within reach with some good systems engineering. Third, we outline what we believe are fundamental open problems, which are likely to require further research to break through. Finally, we provide a list of open-source SLAM implementations and datasets that have been produced during the SubT challenge and related efforts and constitute a useful resource for researchers and practitioners.

Deep learning has had remarkable success in robotic perception, but its data-centric nature suffers when it comes to generalizing to ever-changing environments. By contrast, physics-based optimization generalizes better, but it does not perform as well in complicated tasks due to the lack of high-level semantic information and reliance on manual parametric tuning. To take advantage of these two complementary worlds, we present PyPose: a robotics-oriented, PyTorch-based library that combines deep perceptual models with physics-based optimization. PyPose's architecture is tidy and well-organized, it has an imperative style interface and is efficient and user-friendly, making it easy to integrate into real-world robotic applications. Besides, it supports parallel computing of any order gradients of Lie groups and Lie algebras and 2nd-order optimizers, such as trust region methods. Experiments show that PyPose achieves more than 10× speedup in computation compared to the state-of-the-art libraries. To boost future research, we provide concrete examples for several fields of robot learning, including SLAM, planning, control, and inertial navigation.

In this paper, we propose a vanishing point aided LiDAR-Visual-Inertial estimator to achieve real-time, low-drift and robust pose estimation. The proposed method is mainly composed of 3 sequential modules, namely IMU-aided vanishing point (VP) detection module, voxel-map based feature depth association module, and visual inertial fixed-lag smoother module. The IMU-aided VP detection module will detect feature points, line segments and vanishing points to establish robust correspondences in successive frames. In particular, we propose to use 1-line RANSAC method to provide stable VP hypotheses and polar grid to accelerate vanishing point hypothesis validation. After that, we propose a novel voxel-map based feature depth association method, to retrieve depth and assign depth to visual feature efficiently. Finally, the visual inertial fixed-lag smoother module is proposed to jointly minimize error terms. Experiments show that our method outperforms the state-of-the-art visual-inertial odometry and LiDAR-visual estimator in both indoor and outdoor environments.

We propose Super Odometry, a high-precision multi-modal sensor fusion framework, providing a simple but effective way to fuse multiple sensors such as LiDAR, camera, and IMU sensors and achieve robust state estimation in perceptually-degraded environments. Different from traditional sensor-fusion methods, Super Odometry employs an IMU-centric data processing pipeline, which combines the advantages of loosely coupled methods with tightly coupled methods and recovers motion in a coarse-to-fine manner. The proposed framework is composed of three parts: IMU odometry, Visual-inertial odometry, and LiDAR-inertial odometry. The Visual-inertial odometry and LiDAR-inertial odometry provide the pose prior to constrain the IMU bias and receive the motion prediction from IMU odometry. To ensure high performance in real-time, we apply a dynamic octree that only consumes 10% of the running time compared with a static KD-tree. The proposed system was deployed on drones and ground robots, as part of Team Explorer’s effort to the DARPA Subterranean Challenge where the team won 1stand 2ndplace in the Tunnel and Urban Circuits1, respectively.

To achieve robust motion estimation in visually degraded environments, thermal odometry has been an attraction in the robotics community. However, most thermal odometry methods are purely based on classical feature extractors, which is difficult to establish robust correspondences in successive frames due to sudden photometric changes and large thermal noise. To solve this problem, we propose ThermalPoint, a lightweight feature detection network specifically tailored for producing keypoints on thermal images, providing notable anti-noise improvements compared with other state-of-the-art methods. After that, we combine ThermalPoint with a novel radiometric feature tracking method, which directly makes use of full radiometric data and establishes reliable correspondences between sequential frames. Finally, taking advantage of an optimization-based visual-inertial framework, a deep feature-based thermal-inertial odometry (TP-TIO) framework is proposed and evaluated thoroughly in various visually degraded environments. Experiments show that our method outperforms state-of-the-art visual and laser odometry methods in smoke-filled environments and achieves competitive accuracy in normal environments.

In this paper, we propose a novel laser-inertial odometry and mapping method to achieve real-time, low-drift and robust pose estimation in large-scale highway environments. The proposed method is mainly composed of four sequential modules, namely scan pre-processing module, dynamic object detection module, laser-inertial odometry module and laser mapping module. Scan pre-processing module uses inertial measurements to compensate the motion distortion of each laser scan. Then, the dynamic object detection module is used to detect and remove dynamic objects from each laser scan by applying CNN segmentation network. After obtaining the undistorted point cloud without moving objects, the laser-inertial odometry module uses an Error State Kalman Filter to fuse the data of laser and IMU and output the coarse pose estimation at high frequency. Finally, the laser mapping module performs a fine processing step and the “Frame-to-Model'' scan matching strategy is used to create a static global map. We compare the performance of our method with two state-of-the-art methods, LOAM and SuMa, using KITTI dataset and real highway scene dataset. Experiment results show that our method performs better than the state-of-the-art methods in real highway environments and achieves competitive accuracy on the KITTI dataset.