We analyze and visualize collaboration within the Computational Geometry community by modeling co-authorship relations as a graph, where nodes correspond to individual researchers and edges represent shared publications. By aggregating and time-slicing conference data, we construct a dynamic representation of the community that supports both interactive visualization and structured search.

The sliding cubes model serves as a well-established theoretical framework for formalizing and analyzing reconfiguration algorithms in modular robotic systems built from face-connected cubic modules. We extend the parallel sliding cubes model from two to three dimensions, presenting new algorithms, surprising complexity results, and a generalization of the best known bounds from two to three dimensions. A companion video visualizes and explains our results.

In 1984, Winkler conjectured that every simple Venn diagram with n curves can be extended to a simple Venn diagram with n+1 curves. This conjecture is equivalent to the statement that the dual graph of any simple Venn diagram has a Hamilton cycle. In this work, we construct counterexamples to Winkler’s conjecture for all n ≥ 6. As part of this proof, we computed all 3.430.404 simple Venn diagrams with n = 6 curves (even their number was not previously known), among which we found 72 counterexamples. We also disprove another conjecture about the Hamiltonicity of the arrangement graph of a Venn diagram. Specifically, while working on Winkler’s conjecture, Pruesse and Ruskey proved that this graph has a Hamilton cycle for every simple Venn diagram with n curves, and conjectured that this also holds for non-simple diagrams. We construct counterexamples to this conjecture for all n ≥ 4.

Motivated by targeted drug delivery, we investigate the gathering of particles in the full tilt model of externally controlled motion planning: A set of particles is located at the tiles of a polyomino with all particles reacting uniformly to an external force by moving as far as possible in one of the four axis-parallel directions until they hit the boundary. The goal is to choose a sequence of directions that moves all particles to a common position. Our results include a polynomial-time algorithm for gathering in a completely filled polyomino as well as hardness reductions for approximating shortest gathering sequences and for determining whether the particles in a partially filled polyomino can be gathered. We pay special attention to the impact of restricted geometry, particularly polyominoes without holes. As a corollary, we make progress on an open question from [Balanza-Martinez et al., SODA 2020] by showing that deciding whether a given position can be occupied remains NP-hard in polyominoes without holes. Our results build on a connection we establish between tilt models and the theory of synchronizing automata.

In the classic sliding cube model for programmable matter in three dimensions, the task is to find a reconfiguration sequence between two connected configurations of n indistinguishable unit cube modules by sliding modules along their neighbors' faces. Depending on the objective, this sequence should minimize either the total energy expended (the number of moves) or the total elapsed time (the makespan). We give a number of results for the three-dimensional setting, including (i) the first algorithm that achieves worst-case optimal makespan under parallel motion in three dimensions, (ii) a proof of log-APX-hardness to decide either the optimal makespan or the optimal number of moves, which is the strongest known inapproximability bound in any related model, and (iii) a proof of NP-hardness to decide the optimal makespan under parallel motion, even if the two configurations differ only by one module and the optimal makespan is at most two. Our results strengthen the inapproximability claim from [Hugo A. Akitaya et al., 2022] and answer a question of [Akitaya et al., 2025] in the negative.

Motivated by applications for robust guarding, we consider a variant of the multiple-watchmen problem that ensures that every point within a polygon P is seen from more than one direction: we search for two routes W₁,W₂, such that every point p ∈ P is contained in a segment w₁w₂ ⊆ P such that w₁ ∈ W₁ and w₂ ∈ W₂. We call such routes segment watchman routes. We show that finding the two routes that are optimal with respect to the min-max criterion is weakly NP-hard even in simple polygons, and that finding the routes that are optimal with respect to the min-sum criterion is NP-hard in polygons with holes. Moreover, we present sufficient conditions for routes to be segment watchman routes, and provide a polynomial-time 2-approximation under both the min-max criterion and the min-sum criterion, both in simple polygons. Finally, we show how to generalize our results for k watchmen.

We consider algorithmic problems motivated by modular robotic reconfiguration in the sliding square model, in which we are given n square-shaped modules in a (labeled or unlabeled) start configuration and need to find a schedule of sliding moves to transform it into a desired goal configuration, maintaining connectivity of the configuration at all times. Recent work has aimed at minimizing the total number of moves, resulting in fully sequential schedules that can perform reconfiguration in 𝒪(n²) moves, or 𝒪(nP) for arrangements of bounding box perimeter size P. We provide first results in the sliding square model that exploit parallel motion, performing reconfiguration in worst-case optimal makespan of 𝒪(P). We also provide tight bounds on the complexity of the problem by showing that even deciding the possibility of reconfiguration within makespan 1 is NP-complete in the unlabeled case. In the labeled variant, we note that deciding the same for makespan 2 is NP-complete, while makespan 1 is straightforward.

We study the problem of reconfiguring odd matchings, that is, matchings that cover all but a single vertex. Our reconfiguration operation is a so-called flip where the unmatched vertex of the first matching gets matched, while consequently another vertex becomes unmatched. We consider two distinct settings: the geometric setting, in which the vertices are points embedded in the plane and all occurring odd matchings are crossing-free, and a combinatorial setting, in which we consider odd matchings in general graphs. For the latter setting, we provide a complete polynomial time checkable characterization of graphs in which any two odd matchings can be reconfigured into each another. This complements the previously known result that the flip graph is always connected in the geometric setting [Oswin Aichholzer et al., 2025]. In the combinatorial setting, we prove that the diameter of the flip graph, if connected, is linear in the number of vertices. Furthermore, we establish that deciding whether there exists a flip sequence of length k transforming one given matching into another is NP-complete in both the combinatorial and the geometric settings. To prove the latter, we introduce a framework that allows us to transform partial order types into general position with only polynomial overhead. Finally, we demonstrate that when parameterized by the flip distance k, the problem is fixed-parameter tractable (FPT) in the geometric setting when restricted to convex point sets.

Tilt models offer intuitive and clean definitions of complex systems in which particles are influenced by global control commands. Despite a wide range of applications, there has been almost no theoretical investigation into the associated issues of filling and draining geometric environments. This is partly because a globally controlled system (i.e., passive matter) exhibits highly complex behavior that cannot be locally restricted. Thus, there is a strong need for theoretical studies that investigate these models both (1) in terms of relative power to each other, and (2) from a complexity theory perspective. In this work, we provide (1) general tools for comparing and contrasting different models of global control, and (2) both complexity and algorithmic results on filling and draining.

We investigate the Dispersive Art Gallery Problem with vertex guards and rectangular visibility (r-visibility) for a class of orthogonal polygons that reflect the properties of real-world floor plans: these office-like polygons consist of rectangular rooms and corridors. In the dispersive variant of the Art Gallery Problem, the objective is not to minimize the number of guards but to maximize the minimum geodesic L₁-distance between any two guards, called the dispersion distance. Our main contributions are as follows. We prove that determining whether a vertex guard set can achieve a dispersion distance of 4 in office-like polygons is NP-complete, where vertices of the polygon are restricted to integer coordinates. Additionally, we present a simple worst-case optimal algorithm that guarantees a dispersion distance of 3 in polynomial time. Our complexity result extends to polyominoes, resolving an open question posed by Rieck and Scheffer [Christian Rieck and Christian Scheffer, 2024]. When vertex coordinates are allowed to be rational, we establish analogous results, proving that achieving a dispersion distance of 2+ε is NP-hard for any ε > 0, while the classic Art Gallery Problem remains solvable in polynomial time for this class of polygons. Furthermore, we give a straightforward polynomial-time algorithm that computes worst-case optimal solutions with a dispersion distance 2. On the other hand, for the more restricted class of hole-free independent office-like polygons, we propose a dynamic programming approach that computes optimal solutions. Moreover, we demonstrate that the problem is practically tractable for arbitrary orthogonal polygons. To this end, we compare solvers based on SAT, CP, and MIP formulations. Notably, SAT solvers efficiently compute optimal solutions for randomly generated instances with up to 1600 vertices in under 15s.

Abstract We study the Art Gallery Problem under k-hop visibility in polyominoes. In this visibility model, two unit squares of a polyomino can see each other if and only if the shortest path between the respective vertices in the dual graph of the polyomino has length at most k. In this paper, we show that the VC dimension of this problem is 3 in simple polyominoes, and 4 in polyominoes with holes. Furthermore, we provide a reduction from Planar Monotone 3Sat, thereby showing that the problem is -complete even in thin polyominoes (i.e., polyominoes that do not a contain a $$2\times 2$$ 2 × 2 block of cells). Complementarily, we present a linear-time 4-approximation algorithm for simple 2-thin polyominoes (which do not contain a $$3\times 3$$ 3 × 3 block of cells) for all $$k\in {\mathbb {N}}$$ k ∈ N .

We present progress on the problem of reconfiguring a 2D arrangement of building material by a cooperative group of robots. These robots must avoid collisions, deadlocks, and are subjected to the constraint of maintaining connectivity of the structure. We develop two reconfiguration methods, one based on spatio-temporal planning, and one based on target swapping, to increase building efficiency. The first method can significantly reduce planning times compared to other multi-robot planners. The second method helps to reduce the amount of time robots spend waiting for paths to be cleared, and the overall distance traveled by the robots.

Abstract When considering motion planning for a swarm of n labeled robots, we need to rearrange a given start configuration into a desired target configuration via a sequence of parallel, collision-free moves. The objective is to reach the new configuration in a minimum amount of time. Problems of this type have been considered before, with recent notable results achieving constant stretch for parallel reconfiguration: If mapping the start configuration to the target configuration requires a maximum Manhattan distance of d, the total duration of an overall schedule can be bounded to $$\mathcal {O}(d)$$ O ( d ) , which is optimal up to constant factors. An important constraint for coordinated reconfiguration is to keep the swarm connected after each time step. In previous work, constant stretch could only be achieved if disconnected reconfiguration is allowed, or for scaled configurations of unlabeled robots; on the other hand, the existence of non-constant lower bounds on the stretch factor was unknown. We resolve these major open problems by (1) establishing a lower bound of $$\Omega (\sqrt{n})$$ Ω ( n ) for connected, labeled reconfiguration and, most importantly, by (2) proving that for scaled arrangements, constant stretch for connected, labeled reconfiguration can be achieved. In addition, we show that (3) it is -complete to decide whether a makespan of 2 can be achieved, while it is possible to check in polynomial time whether a schedule of makespan 1 exists.

We introduce a new variant of the art gallery problem that comes from safety issues. In this variant we are not interested in guard sets of smallest cardinality, but in guard sets with largest possible distances between these guards. To the best of our knowledge, this variant has not been considered before. We call it the Dispersive Art Gallery Problem. In particular, in the dispersive art gallery problem we are given a polygon P and a real number ℓ, and want to decide whether P has a guard set such that every pair of guards in this set is at least a distance of ℓ apart. In this paper, we study the vertex guard variant of this problem for the class of polyominoes. We consider rectangular visibility and distances as geodesics in the L1-metric. Our results are as follows. We give a (simple) thin polyomino such that every guard set has minimum pairwise distances of at most 3. On the positive side, we describe an algorithm that computes guard sets for simple polyominoes that match this upper bound, i.e., the algorithm constructs worst-case optimal solutions. We also study the computational complexity of computing guard sets that maximize the smallest distance between all pairs of guards within the guard sets. We prove that deciding whether there exists a guard set realizing a minimum pairwise distance for all pairs of guards of at least 5 in a given polyomino is NP-complete. We were also able to find an optimal dynamic programming approach that computes a guard set that maximizes the minimum pairwise distance between guards in tree-shaped polyominoes, i.e., computes optimal solutions. Because the shapes constructed in the NP-hardness reduction are thin as well (but have holes), this result completes the case for thin polyominoes.

For a given polygonal region P, the Lawn Mowing Problem (LMP) asks for a shortest tour T that gets within Euclidean distance 1 of every point in P; this is equivalent to computing a shortest tour for a unit-disk cutter C that covers all of P. As a geometric optimization problem of natural practical and theoretical importance, the LMP generalizes and combines several notoriously difficult problems, including minimum covering by disks, the Traveling Salesman Problem with neighborhoods (TSPN), and the ∃ℝ-complete Art Gallery Problem (AGP). So far, there have only been theoretical approximation algorithms with worst-case bounds of , where αTSP is the approximation factor for the geometric TSP. Here, αTSP = 1+ ε is theoretically possible by using one of the famous geometric approximation schemes; however, these methods are not practically applicable for concrete instances. Moreover, there have not been any exact methods for the LMP that compute provably near-optimal solutions for instances of interesting size, owing to the combination of geometric difficulties, such as a succinct characterization of optimal solutions, as well as the lack of useful lower bounds that provide practically small performance gaps. In this paper, we conduct the first study of the Lawn Mowing Problem with a focus on practical computation of near-optimal solutions. To this end, we provide new theoretical insights: Optimal solutions are polygonal paths with a bounded number of vertices, i.e., they do not have any curved pieces, allowing a restriction to straight-line solutions; on the other hand, there can be relatively simple instances for which optimal solutions require a large class of irrational coordinates. On the practical side, we present a primal-dual approach with provable convergence properties based on solving a special case of the TSPN restricted to witness sets. In each iteration, this establishes both a valid solution and a valid lower bound, and thereby a bound on the remaining optimality gap. As we demonstrate in an extensive computational study, this allows us to achieve provably optimal and near-optimal solutions for a large spectrum of benchmark instances with up to 2000 vertices. * The full version of the paper can be accessed at https://arxiv.org/abs/2211.05891. This work was supported by DFG project Computational Geometry: Solving Hard Optimization Problems (CG:SHOP), FE407/21-1.

For a given polygonal region P, the Lawn Mowing Problem (LMP) asks for a shortest tour T that gets within Euclidean distance 1/2 of every point in P; this is equivalent to computing a shortest tour for a unit-diameter cutter C that covers all of P. As a generalization of the Traveling Salesman Problem, the LMP is NP-hard; unlike the discrete TSP, however, the LMP has defied efforts to achieve exact solutions, due to its combination of combinatorial complexity with continuous geometry. We provide a number of new contributions that provide insights into the involved difficulties, as well as positive results that enable both theoretical and practical progress. (1) We show that the LMP is algebraically hard: it is not solvable by radicals over the field of rationals, even for the simple case in which P is a 2×2 square. This implies that it is impossible to compute exact optimal solutions under models of computation that rely on elementary arithmetic operations and the extraction of kth roots, and explains the perceived practical difficulty. (2) We exploit this algebraic analysis for the natural class of polygons with axis-parallel edges and integer vertices (i.e., polyominoes), highlighting the relevance of turn-cost minimization for Lawn Mowing tours, and leading to a general construction method for feasible tours. (3) We show that this construction method achieves theoretical worst-case guarantees that improve previous approximation factors for polyominoes. (4) We demonstrate the practical usefulness beyond polyominoes by performing an extensive practical study on a spectrum of more general benchmark polygons: We obtain solutions that are better than the previous best values by Fekete et al., for instance sizes up to 20 times larger.

Abstract We consider the problem of connected coordinated motion planning for a large collective of simple, identical robots: From a given start grid configuration of robots, we need to reach a desired target configuration via a sequence of parallel, collision-free robot motions, such that the set of robots induces a connected grid graph at all integer times. The objective is to minimize the makespan of the motion schedule, i.e., to reach the new configuration in a minimum amount of time. We show that this problem is -complete, even for deciding whether a makespan of 2 can be achieved, while it is possible to check in polynomial time whether a makespan of 1 can be achieved. On the algorithmic side, we establish simultaneous constant-factor approximation for two fundamental parameters, by achieving constant stretch for constant scale. Scaled shapes (which arise by increasing all dimensions of a given object by the same multiplicative factor) have been considered in previous seminal work on self-assembly, often with unbounded or logarithmic scale factors; we provide methods for a generalized scale factor, bounded by a constant. Moreover, our algorithm achieves a constant stretch factor: If mapping the start configuration to the target configuration requires a maximum Manhattan distance of d, then the total duration of our overall schedule is $$\mathcal {O}(d)$$ O ( d ) , which is optimal up to constant factors.

This paper investigates using a sampling-based approach, the RRT*, to reconfigure a 2D set of connected tiles in complex environments, where multiple obstacles might be present. Since the target application is automated building of discrete, cellular structures using mobile robots, there are constraints that determine what tiles can be picked up and where they can be dropped off during reconfiguration. We compare our approach to two algorithms as global and local planners, and show that we are able to find more efficient build sequences using a reasonable amount of samples, in environments with varying degrees of obstacle space.

When considering motion planning for a swarm of $n$ labeled robots, we need to rearrange a given start configuration into a desired target configuration via a sequence of parallel, collision-free robot motions. The objective is to reach the new configuration in a minimum amount of time; an important constraint is to keep the swarm connected at all times. Problems of this type have been considered before, with recent notable results achieving constant stretch for not necessarily connected reconfiguration: If mapping the start configuration to the target configuration requires a maximum Manhattan distance of $d$, the total duration of an overall schedule can be bounded to $\mathcal{O}(d)$, which is optimal up to constant factors. However, constant stretch could only be achieved if disconnected reconfiguration is allowed, or for scaled configurations (which arise by increasing all dimensions of a given object by the same multiplicative factor) of unlabeled robots. We resolve these major open problems by (1) establishing a lower bound of $Ω(\sqrt{n})$ for connected, labeled reconfiguration and, most importantly, by (2) proving that for scaled arrangements, constant stretch for connected reconfiguration can be achieved. In addition, we show that (3) it is NP-complete to decide whether a makespan of 2 can be achieved, while it is possible to check in polynomial time whether a makespan of 1 can be achieved.

We introduce a new variant of the art gallery problem that comes from safety issues. In this variant we are not interested in guard sets of smallest cardinality, but in guard sets with largest possible distances between these guards. To the best of our knowledge, this variant has not been considered before. We call it the Dispersive Art Gallery Problem. In particular, in the dispersive art gallery problem we are given a polygon 𝒫 and a real number 𝓁, and want to decide whether 𝒫 has a guard set such that every pair of guards in this set is at least a distance of 𝓁 apart. In this paper, we study the vertex guard variant of this problem for the class of polyominoes. We consider rectangular visibility and distances as geodesics in the L₁-metric. Our results are as follows. We give a (simple) thin polyomino such that every guard set has minimum pairwise distances of at most 3. On the positive side, we describe an algorithm that computes guard sets for simple polyominoes that match this upper bound, i.e., the algorithm constructs worst-case optimal solutions. We also study the computational complexity of computing guard sets that maximize the smallest distance between all pairs of guards within the guard sets. We prove that deciding whether there exists a guard set realizing a minimum pairwise distance for all pairs of guards of at least 5 in a given polyomino is NP-complete. We were also able to find an optimal dynamic programming approach that computes a guard set that maximizes the minimum pairwise distance between guards in tree-shaped polyominoes, i.e., computes optimal solutions; due to space constraints, details can be found in the full version of our paper [Christian Rieck and Christian Scheffer, 2022]. Because the shapes constructed in the NP-hardness reduction are thin as well (but have holes), this result completes the case for thin polyominoes.

Abstract In micro- and nano-scale systems, particles can be moved by using an external force like gravity or a magnetic field. In the presence of adhesive particles that can attach to each other, the challenge is to decide whether a shape is constructible. Previous work provides a class of shapes for which constructibility can be decided efficiently when particles move maximally into the same direction induced by a global signal. In this paper we consider the single step model, i.e., a model in which each particle moves one unit step into the given direction. We restrict the assembly process such that at each single time step actually one particle is added to and moved within the workspace. We prove that deciding constructibility is NP-complete for three-dimensional shapes, and that a maximum constructible shape can be approximated. The same approximation algorithm applies for 2D. We further present linear-time algorithms to decide whether or not a tree-shape in 2D or 3D is constructible. Scaling a shape yields constructibility; in particular we show that the 2-scaled copy of every non-degenerate polyomino is constructible. In the three-dimensional setting we show that the 3-scaled copy of every non-degenerate polycube is constructible.

We consider the problem of coordinated motion planning for a swarm of simple, identical robots: From a given start grid configuration of robots, we need to reach a desired target configuration via a sequence of parallel, continuous, collision-free robot motions, such that the set of robots induces a connected grid graph at all integer times. The objective is to minimize the makespan of the motion schedule, i.e., to reach the new configuration in a minimum amount of time. We show that this problem is NP-hard, even for deciding whether a makespan of 2 can be achieved, while it is possible to check in polynomial time whether a makespan of 1 can be achieved. On the algorithmic side, we establish simultaneous constant-factor approximation for two fundamental parameters, by achieving constant stretch for constant scale. Scaled shapes (which arise by increasing all dimensions of a given object by the same multiplicative factor) have been considered in previous seminal work on self-assembly, often with unbounded or logarithmic scale factors; we provide methods for a generalized scale factor, bounded by a constant. Moreover, our algorithm achieves a constant stretch factor: If mapping the start configuration to the target configuration requires a maximum Manhattan distance of d, then the total duration of our overall schedule is 𝒪(d), which is optimal up to constant factors.

In this video, we consider recognition and reconfiguration of lattice-based cellular structures by very simple robots with only basic functionality. The underlying motivation is the construction and modification of space facilities of enormous dimensions, where the combination of new materials with extremely simple robots promises structures of previously unthinkable size and flexibility. We present algorithmic methods that are able to detect and reconfigure arbitrary polyominoes, based on finite-state robots, while also preserving connectivity of a structure during reconfiguration. Specific results include methods for determining a bounding box, scaling a given arrangement, and adapting more general algorithms for transforming polyominoes.

We investigate algorithmic approaches for targeted drug delivery in a complex, maze-like environment, such as a vascular system. The basic scenario is given by a large swarm of micro-scale particles ("agents") and a particular target region ("tumor") within a system of passageways. Agents are too small to contain on-board power or computation and are instead controlled by a global external force that acts uniformly on all particles, such as an applied fluidic flow or electromagnetic field. The challenge is to deliver all agents to the target region with a minimum number of actuation steps. We provide a number of results for this challenge. We show that the underlying problem is NP-hard, which explains why previous work did not provide provably efficient algorithms. We also develop a number of algorithmic approaches that greatly improve the worst-case guarantees for the number of required actuation steps. We evaluate our algorithmic approaches by a number of simulations, both for deterministic algorithms and searches supported by deep learning, which show that the performance is practically promising.

We present algorithmic results for the parallel assembly of many micro-scale objects in two and three dimensions from tiny particles, which has been proposed in the context of programmable matter and self-assembly for building high-yield micro-factories. The underlying model has particles moving under the influence of uniform external forces until they hit an obstacle. Particles bond when forced together with another appropriate particle. Due to the physical and geometric constraints, not all shapes can be built in this manner; this gives rise to the Tilt Assembly Problem (TAP) of deciding constructibility. For simply-connected polyominoes P in 2D consisting of N unit-squares (“tiles”), we prove that TAP can be decided in \(O(N\log N)\) time. For the optimization variant MaxTAP (in which the objective is to construct a subshape of maximum possible size), we show polyAPX -hardness: unless P = NP , MaxTAP cannot be approximated within a factor of \(\Omega (N^{\frac{1}{3}})\) ; for tree-shaped structures, we give an \(\Omega (N^{\frac{1}{2}})\) -approximation algorithm. For the efficiency of the assembly process itself, we show that any constructible shape allows pipelined assembly, which produces copies of P in O (1) amortized time, i.e., N copies of P in O ( N ) time steps. These considerations can be extended to three-dimensional objects: For the class of polycubes P we prove that it is NP -hard to decide whether it is possible to construct a path between two points of P ; it is also NP -hard to decide constructibility of a polycube P . Moreover, it is expAPX -hard to maximize a sequentially constructible path from a given start point.