The rapid and worldwide rise in distributed generation capacity, especially photovoltaic, has raised the issue on whether the development and operation of large interconnected systems on a national or continental level will vanish. The usual question is: will the large electric energy systems of today, planned and operated in either a centralized or decentralized way, be replaced by various independent smart-city systems, all with self-healing and other eye-catching characteristics, forming “a grid of microgrids?”

Rheumatic heart disease can result from repeated episodes of acute rheumatic fever, which damages the heart valves and reduces their functionality. Early manifestations of heart valve damage are visible in echocardiography in the form of valve thickening, shape changing and mobility reduction. The quantification of these features is important for a precise diagnosis and it is the main motivation for this work. The first step to make this quantification is to accurately identify and track the anterior mitral leaflet throughout the cardiac cycle. An accurate segmentation and tracking with minimum user interaction is still an open problem in literature due to low image quality, speckle noise, signal dropout and nonrigid deformations. In this work, we propose a novel approach for the identification of the anterior mitral valve leaflet in all frames. The method requires a single user-specified point on the posterior wall of the aorta as input, in the first frame. The echocardiography videos are converted into a new image space, the Virtual M-mode, which samples the original echocardiography image over automatically estimated scanning lines. This new image space not only provides the motion pattern of the posterior wall of the aorta, the anterior wall of the aorta and the posterior wall of the left atrium, but also provides the location of the structures in each frame. The location information is then used to initialize the localized active contours, followed by segmenting the anterior mitral leaflet. Results shown that the new image space has robustly identified the anterior mitral valve leaflet, without any failure. The median modified Hausdorff distance error of the proposed method was 2.3 mm, with a recall of 0.94.

This work proposes a new approach for the segmentation of the extensor tendon in ultrasound images of the second metacarpophalangeal joint (MCPJ). The MCPJ is known to be frequently involved in early stages of rheumatic diseases like rheumatoid arthritis. The early detection and follow up of these diseases is important to start and adapt the treatments properly and, in that way, preventing irreversible damage of the joints. This work relies on an active contours framework, preceded by a phase symmetry preprocessing and with prior knowledge energies, to automatically identify the extensor tendon. Active contours methods are widely used in ultrasound images because of their robustness to speckle noise and ability to join unconnected smaller regions into a coherent shape. The tendon is formulated as a line so open ended active contours were used. Phase symmetry highlights the tendon, by setting a proper scale range and angle span. The distance between structures and the tendon slope were also included to enforce the model based on anatomical characteristics. And finally, the concavity measures were used because, given the anatomy of the finger, we know that the tendon line should have less than two concavities. To solve the active contours energy minimization a genetic algorithm approach was used. Several energy metric configurations were compared using the modified Hausdorff distance and results showed that this segmentation is not only possible, but exhibits errors smaller than 0.5 mm with a confidence of 95% with the phase symmetry preprocessing and energies based on the line neighborhood, area ratio, slope, and concavity measurements.

Blind deconvolution is presented in the underwater acoustic channel context, by time-frequency processing. The acoustic propagation environment was modelled as a multipath propagation channel. For noiseless simulated data, source signature estimation was performed by a model-based method. The channel estimate was obtained via a time-frequency formulation of the conventional matched-filter. Simulations used a ray-tracing physical model, initiated with at-sea recorded environmental data, in order to produce realistic underwater channel conditions. The quality of the estimates was 0.793 for the source signal, and close to 1 for the resolved amplitudes and time-delays of the impulse response. Time-frequency processing has proved to overcome the typical ill-conditioning of single sensor deterministic deconvolution techniques.