Touchless fingerprint sensing technologies have been explored to solve problems in touch-based sensing techniques because they do not require any contact between a sensor and a finger. While they can solve problems caused by the contact of a finger, other difficulties emerge such as a view difference problem and a limited usable area due to perspective distortion. In order to overcome these difficulties, we propose a new touchless fingerprint sensing device capturing three different views at one time and a method for mosaicing these view-different images. The device is composed of a single camera and two planar mirrors reflecting side views of a finger, and it is an alternative to expensive multiple-camera-based systems. The mosaic method can composite the multiple view images by using the thin plate spline model to expand the usable area of a fingerprint image. In particular, to reduce the affect of perspective distortion, we select the regions in each view by minimizing the ridge interval variations in a final mosaiced image. Results are promising as our experiments show that mosaiced images offer 29% more true minutiae and 28% larger good quality area than one-view, unmosaiced images. Also, when the side-view images are matched to the mosaiced images, it gives more matched minutiae than matching with one-view frontal images. We expect that the proposed method can reduce the view difference problem and increase the usable area of a touchless fingerprint image. Furthermore, the proposed method can be applied to other biometric applications requiring a large template for recognition.

Fingerprint image-quality checking is one of the most important issues in fingerprint recognition because recognition is largely affected by the quality of fingerprint images. In the past, many related fingerprint-quality checking methods have typically considered the condition of input images. However, when using the preprocessing algorithm, ridge orientation may sometimes be extracted incorrectly. Unwanted false minutiae can be generated or some true minutiae may be ignored, which can also affect recognition performance directly. Therefore, in this paper, we propose a novel quality-checking algorithm which considers the condition of the input fingerprints and orientation estimation errors. In the experiments, the 2-D gradients of the fingerprint images were first separated into two sets of 1-D gradients. Then, the shapes of the probability density functions of these gradients were measured in order to determine fingerprint quality. We used the FVC2002 database and synthetic fingerprint images to evaluate the proposed method in three ways: 1) estimation ability of quality; 2) separability between good and bad regions; and 3) verification performance. Experimental results showed that the proposed method yielded a reasonable quality index in terms of the degree of quality degradation. Also, the proposed method proved superior to existing methods in terms of separability and verification performance.

This paper proposes a recognizable-image selection algorithm for fingerprint-verification systems that use a camera embedded in a mobile device. A recognizable image is defined as the fingerprint image which includes the characteristics that are sufficiently discriminating an individual from other people. While general camera systems obtain focused images by using various gradient measures to estimate high-frequency components, mobile cameras cannot acquire recognizable images in the same way because the obtained images may not be adequate for fingerprint recognition, even if they are properly focused. A recognizable image has to meet the following two conditions: First, valid region in the recognizable image should be large enough compared with other nonrecognizable images. Here, a valid region is a well-focused part, and ridges in the region are clearly distinguishable from valleys. In order to select valid regions, this paper proposes a new focus-measurement algorithm using the secondary partial derivatives and a quality estimation utilizing the coherence and symmetry of gradient distribution. Second, rolling and pitching degrees of a finger measured from the camera plane should be within some limit for a recognizable image. The position of a core point and the contour of a finger are used to estimate the degrees of rolling and pitching. Experimental results show that our proposed method selects valid regions and estimates the degrees of rolling and pitching properly. In addition, fingerprint-verification performance is improved by detecting the recognizable images.

To obtain a large fingerprint image from several small partial images, mosaicking of fingerprint images has been recently researched. However, existing approaches cannot provide accurate transformations for mosaics when it comes to aligning images because of the plastic distortion that may occur due to the nonuniform contact between a finger and a sensor or the deficiency of the correspondences in the images. In this paper, we propose a new scheme for mosaicking fingerprint images, which iteratively matches ridges to overcome the deficiency of the correspondences and compensates for the amount of plastic distortion between two partial images by using a thin-plate spline model. The proposed method also effectively eliminates erroneous correspondences and decides how well the transformation is estimated by calculating the registration error with a normalized distance map. The proposed method consists of three phases: feature extraction, transform estimation, and mosaicking. Transform is initially estimated with matched minutia and the ridges attached to them. Unpaired ridges in the overlapping area between two images are iteratively matched by minimizing the registration error, which consists of the ridge matching error and the inverse consistency error. During the estimation, erroneous correspondences are eliminated by considering the geometric relationship between the correspondences and checking if the registration error is minimized or not. In our experiments, the proposed method was compared with three existing methods in terms of registration accuracy, image quality, minutia extraction rate, processing time, reject to fuse rate, and verification performance. The average registration error of the proposed method was less than three pixels, and the maximum error was not more than seven pixels. In a verification test, the equal error rate was reduced from 10% to 2.7% when five images were combined by our proposed method. The proposed method was superior to other compared methods in terms of registration accuracy, image quality, minutia extraction rate, and verification.