Enabling high data-rate uplink cellular connectivity for drones is a challenging problem, since a flying drone has a higher likelihood of having line-of-sight propagation to base stations that terrestrial UEs normally do not have line-of-sight to. This may result in uplink inter-cell interference and uplink performance degradation for the neighboring ground UEs when drones transmit at high data-rates (e.g., video streaming). We address this problem from a cellular operator’s standpoint to support drone-sourced video streaming of a point of interest. We propose a low-complexity, closed-loop control system for Open-RAN architectures that jointly optimizes the drone’s location in space and its transmission directionality to support video streaming and minimize its uplink interference impact on the network. We prototype and experimentally evaluate the proposed control system on a dedicated outdoor multi-cell RAN testbed, which is the first measurement campaign of its kind. Furthermore, we perform a large-scale simulation assessment of the proposed control system using the actual cell deployment topologies and cell load profiles of a major US cellular carrier. The proposed Open-RAN control scheme achieves an average$19\%$network capacity gain over traditional BS-constrained control solutions and satisfies the application data-rate requirements of the drone (e.g., to stream an HD video).

This article investigates the basic design principles for a new Wireless Network Operating System (WNOS), a radically different approach to software-defined networking (SDN) for infrastructure-less wireless networks. Departing from well-understood approaches inspired by OpenFlow, WNOS provides the network designer with an abstraction hiding (i) the lower-level details of the wireless protocol stack and (ii) the distributed nature of the network operations. Based on this abstract representation, the WNOS takes network control programs written on a centralized, high-level view of the network and automatically generates distributed cross-layer control programs based on distributed optimization theory that are executed by each individual node on an abstract representation of the radio hardware. We first discuss the main architectural principles of WNOS. Then, we discuss a new approach to automatically generate solution algorithms for each of the resulting subproblems in an automated fashion. Finally, we illustrate a prototype implementation of WNOS on software-defined radio devices and test its effectiveness by considering specific cross-layer control problems. Experimental results indicate that, based on the automatically generated distributed control programs, WNOS achieves 18%, 56% and 80.4% utility gain in networks with low, medium and high levels of interference; maybe more importantly, we illustrate how the global network behavior can be controlled by modifying a few lines of code on a centralized abstraction.

Networks of Unmanned Aerial Vehicles (UAVs), composed of hundreds, possibly thousands of highly mobile and wirelessly connected flying drones will play a vital role in future Internet of Things (IoT) and 5G networks. However, how to control UAV networks in an automated and scalable fashion in distributed, interference-prone, and potentially adversarial environments is still an open research problem. This article introduces SwarmControl, a new software-defined control framework for UAV wireless networks based on distributed optimization principles. In essence, SwarmControl provides the Network Operator (NO) with a unified centralized abstraction of the networking and flight control functionalities. High-level control directives are then automatically decomposed and converted into distributed network control actions that are executed through programmable software-radio protocol stacks. SwarmControl (i) constructs a network control problem representation of the directives of the NO; (ii) decomposes it into a set of distributed sub-problems; and (iii) automatically generates numerical solution algorithms to be executed at individual UAVs.We present a prototype of an SDR-based, fully reconfigurable UAV network platform that implements the proposed control framework, based on which we assess the effectiveness and flexibility of SwarmControl with extensive flight experiments. Results indicate that the SwarmControl framework enables swift reconfiguration of the network control functionalities, and it can achieve an average throughput gain of 159% compared to the state-of-the-art solutions.

This article studies an essential yet challenging problem in 5G wireless networks: Is it possible to enable spectrally-efficient spectrum sharing for heterogeneous wireless networks with different, possibly incompatible, spectrum access technologies on the same spectrum bands; without modifying the protocol stacks of existing wireless networks? To answer this question, this article explores the system challenges that need to be addressed to enable a new spectrum sharing paradigm based on beamforming, which we refer to as CoBeam. In CoBeam, a secondary wireless network is allowed to access a spectrum band based on cognitive beam-forming without mutual temporal exclusion, i.e., without interrupting the ongoing transmissions of coexisting wireless networks on the same bands; and without cross-technology communication. We first describe the main components of CoBeam, including programmable physical layer driver, cognitive sensing engine, and beamforming engine, and then we showcase the potential of the CoBeam framework by designing a practical coexistence scheme between Wi-Fi and LTE on unlicensed bands. We present a prototype of the resulting coexisting Wi-Fi/U-LTE network built on off-the-shelf software radios based on which we evaluate the performance of CoBeam through an extensive experimental campaign. Performance evaluation results indicate that CoBeam can achieve on average 169% throughput gain while requiring no signaling exchange between the coexisting wireless networks.

Current cellular networks rely on closed and inflexible infrastructure tightly controlled by a handful of vendors. Their configuration requires vendor support and lengthy manual operations, which prevent Telco Operators (TOs) from unlocking the full network potential and from performing fine grained performance optimization, especially on a per-user basis. To address these key issues, this paper introduces CellOS, a fully automated optimization and management framework for cellular networks that requires negligible intervention (“zero-touch”). CellOS leverages softwarization and automatic optimization principles to bridge Software-Defined Networking (SDN) and cross-layer optimization. Unlike state-of-the-art SDN-inspired solutions for cellular networking, CellOS: (i) Hides low-level network details through a general virtual network abstraction; (ii) allows TOs to define high-level control objectives to dictate the desired network behavior without requiring knowledge of optimization techniques, and (iii) automatically generates and executes distributed control programs for simultaneous optimization of heterogeneous control objectives on multiple network slices. CellOS has been implemented and evaluated on an indoor testbed with two different LTE-compliant implementations: OpenAirInterface and srsLTE. We further demonstrated CellOS capabilities on the long-range outdoor POWDER-RENEW PAWR 5G platform. Results from scenarios with multiple base stations and users show that CellOS is platform-independent and self-adapts to diverse network deployments. Our investigation shows that CellOS outperforms existing solutions on key metrics, including throughput (up to 86% improvement), energy efficiency (up to 84%) and fairness (up to 29%).

This article investigates the basic design principles for a new Wireless Network Operating System (WNOS), a radically different approach to software-defined networking (SDN) for infrastructure-less wireless networks. Departing from well-understood approaches inspired by OpenFlow, WNOS provides the network designer with an abstraction hiding (i) the lower-level details of the wireless protocol stack and (ii) the distributed nature of the network operations. Based on this abstract representation, the WNOS takes network control programs written on a centralized, high-level view of the network and automatically generates distributed cross-layer control programs based on distributed optimization theory that are executed by each individual node on an abstract representation of the radio hardware.