In this paper, we focus on the kangaroo, which has powerful legs capable of jumping and a soft and strong tail. To incorporate these unique structure into a robot for utilization, we propose a design method that takes into account both the feasibility as a robot and the kangaroo-mimetic structure. Based on the kangaroo's musculoskeletal structure, we determine the structure of the robot that enables it to jump by analyzing the muscle arrangement and prior verification in simulation. Also, to realize a tail capable of body support, we use an articulated, elastic structure as a tail. In order to achieve both softness and high power output, the robot is driven by a direct-drive, high-power wire-winding mechanism, and weight of legs and the tail is reduced by placing motors in the torso. The developed kangaroo robot can jump with its hind legs, moving its tail, and supporting its body using its hind legs and tail.

There is a way to utilize humanoid robots to mimic human behavior by taking advantage of their human-like proportions. In general, motion capture is used; in this case, the posture of the body links can be taken. However, this method does not provide detailed information on the contact state, which is important for actions that involve contact with objects. In this study, we focused on the foot, which has not been paid much attention among the parts where contact and manipulation with objects are important, and developed a device to measure the contact pressure distribution at the outer edge of the sole. We proposed an index, SS-COP, which simply reflects the contact on the curved surface of the sole for this device and a robot foot with lateral force sensation and realized a behavior that imitates the foot condition of a humanoid robot by using this index.

Legged robots with high locomotive performance have been extensively studied, and various leg structures have been proposed. Especially, a leg structure that can achieve both continuous and high jumps is advantageous for moving around in a three-dimensional environment. In this study, we propose a parallel wire-driven leg structure, which has one DoF of linear motion and two DoFs of rotation and is controlled by six wires, as a structure that can achieve both continuous jumping and high jumping. The proposed structure can simultaneously achieve high controllability on each DoF, long acceleration distance and high power required for jumping. In order to verify the jumping performance of the parallel wire-driven leg structure, we have developed a parallel wire-driven monopedal robot, RAMIEL. RAMIEL is equipped with quasi-direct drive, high power wire winding mechanisms and a lightweight leg, and can achieve a maximum jumping height of 1.6 m and a maximum of seven continuous jumps.

Humanoid robots are expected to play a big role at distress sites and disaster sites. There is a variety of multi-contact locomotion forms other than bipedal walking such as crawling through tightly, getting on the rubble by using its knees and elbows, or jumping in and rolling over the obstacles. If such multi-contact locomotion forms can be achieved, robots can reach environments that are currently unreachable, and be able to conduct tasks required at the environments. To achieve this, it is required for robots to bring various parts of its body into contact with the environment like a human. However, it is difficult for parts without 6-axis force sensors to achieve the target force while adapting to the environment against impact force. It is also difficult to measure contact wrenches without 6-axis force sensors. In this paper, by allowing the error of the contact state, we propose online system for realizing dynamic motion which impact force occurs on the parts of the whole body by contact to the environment. In the proposed system, we applied the current-based torque control for joints to make the whole body parts of the robot adapt to the environment, and we modified motion in real time to stabilize zmp by estimating contact wrenches at the contact positions where force sensors are not mounted. In addition, at the motion planning, we generated more feasible motions for a robot applying torque control by using evolutionary computation which advances the search with the behavior of torque control. We demonstrate that the proposed system is effective by showing experimental results of sitting posture locomotion using a JAXON robot in which impact force occur on the back of the thighs which have no force sensors.

For robots to autonomously achieve manipulation tasks in various scenes, advanced operational skills such as tool use, learning from demonstration, and multi-robot/human-robot cooperation are necessary. In this research, we devise a method for robots to realize such operational skills in a unified manner by evaluating physical consistency (referred to as “physics reasoning”) based on the formulation of the manipulation statics constraints. First, we propose manipulation planning and estimation methods in which the operational feasibility and properties' likelihood are derived by physics reasoning. In addition, we propose a framework to manipulate an object with unknown physical properties by executing planning and estimation both sequentially and in parallel. We demonstrate the effectiveness of the proposed methods by performing experiments in which real humanoid robots achieve various manipulation tasks with advanced operational skills.

In this paper, we propose methods for walking on a steep slope using a rope by a humanoid robot. There are two difficulties for walking on a steep slope without a rope. First, range of motion of ankle joints get limited. Second, feet of a robot slip on a steep slope. For these problems, using a rope is effective solution because the robot can receive enough friction force from the slope and walk on a steep slope by pulling a rope with proper tension. In addition, the robot pulling a rope on a slope can relax limitations of ankle joints. Therefore, we propose methods to determine tension of a grasped rope by solving a linear least-square problem considering deformability of a rope. With these methods, a life-size humanoid robot HRP-2 could walk on a steep slope which angle is 40 degree.