Garbage classification and management(GCM) has become one of the key issues in the development of smart city. Due to single functionality and expensive deployment, many existing garbage classification and management systems are limited in some practical application scenarios. In this paper, we design SmartGCM, a smart GCM system based onLTE UE-Category 1(Cat.1), which can detect real-time status information from community trash cans and classify different types of garbage. Specifically, SmartGCM is based on the embedded microcontroller to remotely monitor the real-time status of trash cans. Then, we designed an optimization algorithm based on the genetic path algorithm to solve the problem of garbage cleaning path planning; meanwhile, combined with the incentive mechanism, a lightweightconvolutional neural network(CNN) based on edge computing is deployed and implemented. To improve the accuracy of SmartGCM classification, we perform edge extraction and smooth noise through the Sobel operator combined with LeNet-5, a deep convolutional neural network. In experiment, we collect 2900+ real data of six types of garbage images, and obtain the optimal garbage classification model by designing reasonable convolutional kernel size and convolutional layer number. The experimental results demonstrate that SmartGCM achieves a classification accuracy of 92.75% and Macro-F1 of 93.15%. SmartGCM can not only improve citizens’ environmental awareness, but can also contribute to the development of smart cities.

The design of MEMS sensor presents a significant challenge in identifying feasible structures that align with specific performance criteria. Traditionally, this process demands extensive design expertise and iterative simulations, leading to time-intensive workflows. While recent advancements have introduced deep learning (DL) models to expedite this process, they are limited to handling simple scenarios with precise performance values and fixed dimensions as inputs, often overlooking the uncertainty inherent in real design scenarios, such as vague range requirements and variable input dimensions. To address this issue, this study introduces a novel DL-based design model along with corresponding modeling strategies. The proposed model consists of a search network (SN), a validation network (VN), and a precision optimizer (PO). Initially, design requirements of various types and dimensions are transformed into a standardized input vector to address diverse design scenarios, which is then processed by the SN to generate a feasible structure. The VN, trained prior to the SN, validates the structure and generates training data for the SN. In cases where the model output fails to sufficiently align with the requirements, the PO is deployed to minimize the design error. Validation of the proposed model was conducted using a piezoresistive acceleration sensor across 100000 distinct design requirements. The results demonstrate an overall design accuracy (DA) of 92.64% on the testing data. Following 1000 iterations leveraging the proposed PO, the DA improves to 93.84%. Notably, each design iteration and optimization using the PO only requires approximately 0.1 ms, significantly boosting the design efficiency of MEMS sensors.

To achieve the desired characteristics for MEMS sensors, the traditional design process obtains the geometrical parameters based on complex theoretical calculations and interactive finite-element (FE) simulations, which are time consuming and data consuming. To solve the above problems, a data-driven bidirectional design approach based on the deep learning (DL) method is introduced to improve the design efficiency of MEMS sensors in this work. By using the piezoresistive acceleration sensor as a design example, the forward artificial neural network (ANN) with the sensor geometrical parameters as the input and the sensor performance as the output is trained and realized by using 1000 groups of data collected through FE simulation. This forward ANN can accurately predict the sensor performance, including the measurement range, sensitivity, and resonant frequency. In addition, the inverse ANN with the sensor performance as the input and the sensor geometrical parameters as the output is also achieved by using a tandem network. This inverse ANN can provide the geometrical parameters directly and instantly according to the target performance. Both the forward and inverse networks cost only about 6 ms for each task and the mean relative errors are less than 3%. The high efficiency and low relative error indicate that DL is a promising approach to improve the design efficiency for MEMS sensors.

Primary-side regulation (PSR) flyback topology with discontinuous conduction modulation (DCM) mode has been widely used in low-power application due to its high stability, wide input voltage range, low cost, and low standby power. To improve the output power, continuous conduction modulation (CCM) mode is always introduced. However, in CCM mode, conventional PSR voltage-sampling method cannot realize high precision of output voltage or the voltage sampling method requires complex control of high cost. In this paper, a simple digital voltage sampling scheme with two reference voltages outputted from a digital-to-analog converter (DAC) is put forward to trace the “accurate-point” voltage for DCM and CCM modes. In CCM mode, the sampling voltage error of the “knee-point” voltage can be compensated just by inserting DCM switching cycle to obtain the “accurate-point” voltage. Voltage difference between DCM mode and CCM mode will be eliminated, and high precision is easily realized. The proposed method is verified in a 20V, 65W PSR flyback converter. The sampling method only requires a low speed DAC, three comparators and a digital controller. The output voltage precision is within 0.6% with universal input voltage.

This paper proposes a new structural design to excite surface plasmonic polaritons to enhance the double‐ring interference structure. The double‐ring structure was etched into a thin film to form fundamental interference patterns, and periodic concentric‐ring grooves were employed to gather energy from the surrounding regions through the excitation of surface plasmonic polaritons. Accordingly, the energy of the incident light can be concentrated at the center. The surface plasmon modulates the interference pattern and the transmission spectra. The transmission peak position and its intensity can be tuned by changing the alignment of the grooves. The proposed structure can be applied for designing plasmonic devices as useful components of the plasmonic toolbox.