We explore a temperature illusion that uses low-powered electronics and enables the miniaturization of simple warm and cool sensations. Our illusion relies on the properties of certain scents, such as the coolness of mint or hotness of peppers. These odors trigger not only the olfactory bulb, but also the nose's trigeminal nerve, which has receptors that respond to both temperature and chemicals. To exploit this, we engineered a wearable device based on micropumps and an atomizer that emits up to three custom-made "thermal" scents directly to the user's nose. Breathing in these scents causes the user to feel warmer or cooler. We demonstrate how our device renders warmth and cooling sensations in virtual experiences. In our first study, we evaluated six candidate "thermal" scents. We found two hot-cold pairs, with one pair being less identifiable by odor. In our second study, pParticipants rated VR experiences with our device trigeminal stimulants as significantly warmer or cooler than the baseline conditions. Lastly, we believe this offers an alternative to existing thermal feedback devices, which unfortunately rely on power-hungry heat-lamps or Peltier-elements.

We engineered a wearable microphone jammer that is capable of disabling microphones in its user's surroundings, including hidden microphones. Our device is based on a recent exploit that leverages the fact that when exposed to ultrasonic noise, commodity microphones will leak the noise into the audible range.

We present a scalable Do-It-Yourself (DIY) fabrication workflow for prototyping highly stretchable yet robust devices using a CO2 laser cutter, which we call Silicone Devices. Silicone Devices are self-contained and thus embed components for input, output, processing, and power. Our approach scales to arbitrary complex devices as it supports techniques to make multi-layered stretchable circuits and buried VIAs. Additionally, high-frequency signals are supported as our circuits consist of liquid metal and are therefore highly conductive and durable. To enable makers and interaction designers to prototype a wide variety of Silicone Devices, we also contribute a stretchable sensor toolkit, consisting of touch, proximity, sliding, pressure, and strain sensors. We demonstrate the versatility and novel opportunities of our technique by prototyping various samples and exploring their use cases. Strain tests report on the reliability of our circuits and preliminary user feedback reports on the user-experience of our workflow by non-engineers.