Azimuth multichannel synthetic aperture radar (SAR) consistently encounters challenges associated with nonuniform sampling during its operation. The use of the conventional matrix inversion method leads to an increase in sampling irregularity, exacerbating noise interference during signal reconstruction and, consequently, contributing to a gradual decline in signal fidelity. This paper introduces a novel method to construct an L2regularized reconstruction matched filter, effectively mitigating noise impact prevalent in scenarios of extensive nonuniform sampling. The proposed method is highly computationally efficient, and the signal-to-noise ratio (SNR) index can be expressed in an unambiguous manner. Comparative simulation experiments illustrate the significant improvement in SNR performance achieved by the novel method in comparison to the traditional matrix inversion method.

In this paper, we present a novel unsupervised representation learning approach for 3D shapes, which is an important research challenge as it avoids the manual effort required for collecting supervised data. Our method trains an RNNbased neural network architecture to solve multiple view inter-prediction tasks for each shape. Given several nearby views of a shape, we define view inter-prediction as the task of predicting the center view between the input views, and reconstructing the input views in a low-level feature space. The key idea of our approach is to implement the shape representation as a shape-specific global memory that is shared between all local view inter-predictions for each shape. Intuitively, this memory enables the system to aggregate information that is useful to better solve the view inter-prediction tasks for each shape, and to leverage the memory as a viewindependent shape representation. Our approach obtains the best results using a combination of L2 and adversarial losses for the view inter-prediction task. We show that VIP-GAN outperforms state-of-the-art methods in unsupervised 3D feature learning on three large-scale 3D shape benchmarks.

Jointly learning representations of 3D shapes and text is crucial to support tasks such as cross-modal retrieval or shape captioning. A recent method employs 3D voxels to represent 3D shapes, but this limits the approach to low resolutions due to the computational cost caused by the cubic complexity of 3D voxels. Hence the method suffers from a lack of detailed geometry. To resolve this issue, we propose Y2Seq2Seq, a view-based model, to learn cross-modal representations by joint reconstruction and prediction of view and word sequences. Specifically, the network architecture of Y2Seq2Seq bridges the semantic meaning embedded in the two modalities by two coupled “Y” like sequence-tosequence (Seq2Seq) structures. In addition, our novel hierarchical constraints further increase the discriminability of the cross-modal representations by employing more detailed discriminative information. Experimental results on cross-modal retrieval and 3D shape captioning show that Y2Seq2Seq outperforms the state-of-the-art methods.

Learning 3D global features by aggregating multiple views has been introduced as a successful strategy for 3D shape analysis. In recent deep learning models with end-to-end training, pooling is a widely adopted procedure for view aggregation. However, pooling merely retains the max or mean value over all views, which disregards the content information of almost all views and also the spatial information among the views. To resolve these issues, we propose Sequential Views To Sequential Labels (SeqViews2SeqLabels) as a novel deep learning model with an encoder-decoder structure based on recurrent neural networks (RNNs) with attention. SeqViews2SeqLabels consists of two connected parts, an encoder-RNN followed by a decoder-RNN, that aim to learn the global features by aggregating sequential views and then performing shape classification from the learned global features, respectively. Specifically, the encoder-RNN learns the global features by simultaneously encoding the spatial and content information of sequential views, which captures the semantics of the view sequence. With the proposed prediction of sequential labels, the decoder-RNN performs more accurate classification using the learned global features by predicting sequential labels step by step. Learning to predict sequential labels provides more and finer discriminative information among shape classes to learn, which alleviates the overfitting problem inherent in training using a limited number of 3D shapes. Moreover, we introduce an attention mechanism to further improve the discriminative ability of SeqViews2SeqLabels. This mechanism increases the weight of views that are distinctive to each shape class, and it dramatically reduces the effect of selecting the first view position. Shape classification and retrieval results under three large-scale benchmarks verify that SeqViews2SeqLabels learns more discriminative global features by more effectively aggregating sequential views than state-of-the-art methods.