The global prevalence of anxiety has seen a significant increase in the past few years. Anxiety, if left untreated, can lead to various detrimental effects, such as sleep disturbances, excessive fear, and even suicidal tendencies. Traditional face-to-face therapies have been employed to address this issue; however, their effectiveness is limited by time and space constraints, particularly during the COVID-19 pandemic. As a result, computer-based systems have emerged as a potential solution. However, most existing relaxation systems rely on a single method and have unnatural interactions, leading to a lack of variety and engagement. To overcome these limitations, this study proposes a virtual reality (VR) relaxation system that combines various relaxation techniques, a captivating storyline and natural interactions to enhance the user experience. To assess the effectiveness of the proposed system, a pilot study was conducted with 36 participants. The study utilized a between-subjects design, dividing the participants into three groups: a control group, a progressive muscular relaxation group, and a virtual reality relaxation group. The findings revealed that the virtual reality relaxation system significantly reduced anxiety levels among the participants. Importantly, this effect was observed to persist even after a period of time and was found to be more effective than using only one relaxation method in the long term. Moreover, the performance of our system is close to that of commercial systems.

Resistive Random-Access Memory (ReRAM) based Processing-in-Memory (PIM) frameworks are proposed to accelerate the working process of DNN models by eliminating the data movement between the computing and memory units. To further mitigate the space and energy consumption, DNN model weight sparsity and weight pattern repetition are exploited to optimize these ReRAM-based accelerators. However, most of these works only focus on one aspect of this software/hardware co-design framework and optimize them individually, which makes the design far from optimal. In this paper, we propose PRAP-PIM, which jointly exploits the weight sparsity and weight pattern repetition by using a weight pattern reusing aware pruning method. By relaxing the weight pattern reusing precondition, we propose a similarity-based weight pattern reusing method that can achieve a higher weight pattern reusing ratio. Experimental results show that PRAP-PIM achieves 1.64× performance improvement and 1.51× energy efficiency improvement in popular deep learning benchmarks, compared with the state-of-the-art ReRAM-based DNN accelerators.

Mobile chargers (MCs) are usually dispatched to deliver energy to sensors in wireless rechargeable sensor networks (WRSNs) due to its flexibility and easy maintenance. This paper concerns the fundamental issue of charging path DEsign with the Minimized energy cOst (DEMO), i.e., given a set of rechargeable sensors, we appropriately design the MC’s charging path to minimize the energy cost which is due to the wireless charging and the MC’s movement, such that the different charging demand of each sensor is satisfied. Solving DEMO is NP-hard and involves handling the tradeoff between the charging efficiency and the moving cost. To address DEMO, we first investigate how to identify a single charging position where the MC could stay to charge a set of sensors distributed within a small area with the maximized charging efficiency. Then, based on the result obtained in the case of optimizing a single charging position, we develop a computational geometry-based algorithm to deploy multiple charging positions within the whole network, by considering the fixed and finite charging range of the MC. We prove that the designed algorithm has the approximation ratio of$O\!\left ({\ln \!N}\right)$, where$N$is the number of sensors. Then we construct the charging path by calculating the shortest Hamiltonian cycle passing through all the deployed charging positions within the network. In addition, we investigate the impact of the network topology as well as the distribution of charging demands among sensors on the MC’s energy cost during a charging tour. Extensive evaluations validate the superiority of our path design in terms of the MC’s energy cost minimization, compared with existing main algorithms.

Mobile chargers (MCs) are usually dispatched to deliver energy to sensors in wireless rechargeable sensor networks (WRSNs) due to its flexibility and easy maintenance. This paper concerns the fundamental issue of charging path DEsign with the Minimized energy cOst (DEMO), i.e., given a set of rechargeable sensors, we appropriately design the MC’s charging path to minimize the energy cost which is due to the wireless charging and the MC’s movement, such that the different charging demand of each sensor is satisfied. Solving DEMO is NP-hard and involves handling the tradeoff between the charging efficiency and the moving cost. To address DEMO, we first develop a computational geometry-based algorithm to deploy multiple charging positions where the MC stays to charge nearby sensors. We prove that the designed algorithm has the approximation ratio of O(lnN), where N is the number of sensors. Then we construct the charging path by calculating the shortest Hamiltonian cycle passing through all the deployed charging positions within the network. Extensive evaluations validate the effectiveness of our path design in terms of the MC’s energy cost minimization.

Wireless power transfer (WPT) enables a reliable and convenient charging paradigm. This article concerns the fundamental issue of energy saving in wireless rechargeable sensor networks (WRSNs), i.e., given a fixed number of rechargeable sensors (RSs) with their locations and charging demands, we focus on a minimal charging expenditure (MAP) problem with directional WPT to decrease the energy expenditure of the charger, on condition that the charging demands of all sensors are satisfied. In particular, we consider the anisotropic energy receiving property of RSs, which is closely related to the distance and the angle between the sensor and the charger antenna's orientation in directional WPT. We transform the MAP problem into an optimal function placement (OFA) problem, which can be geometrically analyzed in a rectangular coordinate system and is NP-hard. First, we study the OFA problem in the case of uniformly distributed sensors with identical charging demands, we develop the uniform charging strategy (UCS) to bound the total charging expenditure as Θ(1) for any number of sensors N. Based on the acquired insights, we further studied the OFA problem when the distribution of charging demands is Gaussian. We bound the total charging expenditure as Θ(1) for any number of sensors N, by developing the layered charging strategy (LCS). Extensive simulation results confirmed the performance of our design compared with two baseline algorithms. Both of the theoretical and simulations results reveal that the total energy expenditure of the charger is strongly related to the sensors' charging demands, however, is less affected by the number of sensors in the network.