Many video streaming applications will simultaneously transfer data in both directions, from the user to the Internet (uplink) and from the Internet to users (downlink). However, for wireless local area networks (WLANs), the dominant scenarios, the uplink and downlink flows share the same half-duplex physical channel and compete for bandwidth resources. Their bandwidths would be fairly apportioned under the existing link layer access method, but a fair share might be suboptimal for applications. For better application performance, we propose Plum, to coordinate the bitrate of uplink and downlink flows, and allocate the bandwidth in both directions to cater to the application's demands. To make the deployment of Plum practical, we aim at not modifying the link layer but optimizing the transport layers and above. We evaluate our mechanisms with simulations based on real-world traces and testbed experiments, and results show that Plum could improve the video bitrate of streaming applications by up to 48-59%.

Major commercial client-side video players employ adaptive bitrate (ABR) algorithms to improve the user quality of experience (QoE). With the evolvement of ABR algorithms, increasingly complex methods such as neural networks have been adopted to pursue better performance. However, these complex methods are too heavyweight to be directly deployed in client devices with limited resources, such as mobile phones. Existing solutions suffer from a trade-off between algorithm performance and deployment overhead. To make the deployment of sophisticated ABR algorithms practical, we propose PiTree, a general, high-performance, and scalable framework that can faithfully convert sophisticated ABR algorithms into decision trees with teacher-student learning. In this way, network operators can train complex models offline and deploy converted lightweight decision trees online. We also present theoretical analysis on the conversion and provide two upper bounds of the prediction error during the conversion and the generalization loss after conversion. Evaluation on three representative ABR algorithms with both trace-driven emulation and real-world experiments demonstrates that PiTree could convert ABR algorithms into decision trees with <; 3% average performance degradation. Moreover, compared to original deployment solutions, PiTree could save considerable operating expenses for content providers.

Smart Network Interface Cards (SmartNICs) have been widely used to accelerate software-based network functions (NFs). However, from the scope of a service chain, a careless selection of NFs to offload onto SmartNIC could severely degrade the performance due to frequent communications between CPU and SmartNIC. In this paper, we present SmartChain, a high performance and efficient framework that achieves optimal partition of service chains between SmartNIC and CPU. SmartChain consists of two logical steps. First, SmartChain analyzes the suitability of elements in a chain to run on SmartNIC to exploit its high performance. Besides, SmartChain also ensures the dependencies between elements. Second, as our key novelty, SmartChain models the service chain latency and resource constraints, and solves the partition problem with 0-1 integer linear programming. We implement a SmartChain prototype based on Netronome SmartNIC. Evaluation results show that when used in real world cases, SmartChain could reduce the service chain latency by up to 87% with throughput maintained compared with strawman solutions.

Advanced network management systems, including network measurement and traffic control, rely on a remote controller to make control decisions. However, this approach incurs a long control loop of a few seconds to minutes. Even if we switch to switch-local controller, the latency is still tens of milliseconds and is unacceptable for many latency-sensitive tasks. In this paper, we propose Martini, a general framework that supports measurement-based timely control. The key idea is to perform measurement, control decision, and control entirely in the switch data plane. This could shorten the control loop of management tasks that require timely control based on only locally measured statistics in the switch. First, Martini introduces a set of primitives to describe management tasks. Next, Martini provides an innovative network-wide task placement mechanism to exploit resources of all switches to accommodate massive management tasks. Finally, Martini provides a code library and a compiler to support measurement and control on a state-of-the-art switching ASIC. Evaluation results show that Martini can effectively support a wide range of fine-timescale management tasks such as microburst detection and fast load balancing by reducing the control loop from seconds to nanoseconds.

While many deep learning (DL)-based networking systems have demonstrated superior performance, the underlying Deep Neural Networks (DNNs) remain blackboxes and stay uninterpretable for network operators. The lack of interpretability makes DL-based networking systems prohibitive to deploy in practice. In this paper, we propose Metis, a framework that provides interpretability for two general categories of networking problems spanning local and global control. Accordingly, Metis introduces two different interpretation methods based on decision tree and hypergraph, where it converts DNN policies to interpretable rule-based controllers and highlight critical components based on analysis over hypergraph. We evaluate Metis over two categories of state-of-the-art DL-based networking systems and show that Metis provides human-readable interpretations while preserving nearly no degradation in performance. We further present four concrete use cases of Metis, showcasing how Metis helps network operators to design, debug, deploy, and ad-hoc adjust DL-based networking systems.