Traditional Visual Simultaneous Localization and Mapping systems focus solely on static scene structures, overlooking dynamic elements in the environment. Although effective for accurate visual odometry in complex scenarios, these methods discard crucial information about moving objects. By incorporating this information into a Dynamic SLAM framework, the motion of dynamic entities can be estimated, enhancing navigation whilst ensuring accurate localization. However, the fundamental formulation of Dynamic SLAM remains an open challenge, with no consensus on the optimal approach for accurate motion estimation within a SLAM pipeline. Therefore, we developedDynoSAM, an open-source framework for Dynamic Objects SLAM that enables the efficient implementation, testing, and comparison of various Dynamic SLAM optimization formulations. We further propose a novel formulation that encodes rigid-body motion model in object pose estimation as well as an error metric agnostic to object frame definition.DynoSAMintegrates static and dynamic measurements into a unified optimization problem solved using factor graphs, simultaneously estimating camera poses, static scene, object motion or poses, and object structures. We evaluateDynoSAMacross diverse simulated and real-world datasets, achieving state-of-the-art motion estimation in indoor and outdoor environments, with substantial improvements over existing systems. Additionally, we demonstrateDynoSAM's contributions to downstream applications, including 3D reconstruction of dynamic scenes and trajectory prediction, thereby showcasing potential for advancing dynamic object-aware SLAM systems. Code is open-sourced athttps://github.com/ACFR-RPG/DynOSAM

This paper presents DynORecon, a Dynamic Object Reconstruction system that leverages the information provided by Dynamic SLAM to simultaneously generate a volumetric map of observed moving entities while estimating free space to support navigation. By capitalising on the motion estimations provided by Dynamic SLAM, DynORecon continuously refines the representation of dynamic objects to eliminate residual artefacts from past observations and incrementally reconstructs each object, seamlessly integrating new observations to capture previously unseen structures. Our system is highly efficient (~20 FPS) and produces accurate (~10 cm) object reconstructions using simulated and real-world outdoor datasets.

Most Simultaneous localisation and mapping (SLAM) systems have traditionally assumed a static world, which does not align with real-world scenarios. To enable robots to safely navigate and plan in dynamic environments, it is essential to employ representations capable of handling moving objects. Dynamic SLAM is an emerging field in SLAM research as it improves the overall system accuracy while providing additional estimation of object motions. State-of-the-art literature informs two main formulations for Dynamic SLAM, representing dynamic object points in either the world or object coordinate frame. While expressing object points in their local reference frame may seem intuitive, it does not necessarily lead to the most accurate and robust solutions. This paper conducts and presents a thorough analysis of various Dynamic SLAM formulations, identifying the best approach to address the problem. To this end, we introduce a front-end agnostic framework using GTSAM [1] that can be used to evaluate various Dynamic SLAM formulations.1

Safe motion planning in robotics requires planning into space which has been verified to be free of obstacles. However, obtaining such environment representations using lidars is challenging by virtue of the sparsity of their depth measurements. We present a learning-aided 3D lidar reconstruction framework that upsamples sparse lidar depth measurements with the aid of overlapping camera images so as to generate denser reconstructions with more definitively free space than can be achieved with the raw lidar measurements alone. We use a neural network with an encoder-decoder structure to predict dense depth images along with depth uncertainty estimates which are fused using a volumetric mapping system. We conduct experiments on real-world outdoor datasets captured using a handheld sensing device and a legged robot. Using input data from a 16-beam lidar mapping a building network, our experiments showed that the amount of estimated free space was increased by more than 40% with our approach. We also show that our approach trained on a synthetic dataset generalises well to real-world outdoor scenes without additional fine-tuning. Finally, we demonstrate how motion planning tasks can benefit from these denser reconstructions.

We present an efficient, elastic 3D LiDAR reconstruction framework which can reconstruct up to maximum Li-DAR ranges (60 m) at multiple frames per second, thus enabling robot exploration in large-scale environments. Our approach only requires a CPU. We focus on three main challenges of large-scale reconstruction: integration of long-range LiDAR scans at high frequency, the capacity to deform the reconstruction after loop closures are detected, and scalability for long-duration exploration. Our system extends upon a state-of-the-art efficient RGB-D volumetric reconstruction technique, called supereight, to support LiDAR scans and a newly developed submapping technique to allow for dynamic correction of the 3D reconstruction. We then introduce a novel pose graph clustering and submap fusion feature to make the proposed system more scalable for large environments. We evaluate the performance using two public datasets including outdoor exploration with a handheld device and a drone, and with a mobile robot exploring an underground room network. Experimental results demonstrate that our system can reconstruct at 3 Hz with 60 m sensor range and ~5 cm resolution, while state-of-the-art approaches can only reconstruct to 25 cm resolution or 20 m range at the same frequency.

In this paper, we develop an online active mapping system to enable a quadruped robot to autonomously survey large physical structures. We describe the perception, planning and control modules needed to scan and reconstruct an object of interest, without requiring a prior model. The system builds a voxel representation of the object, and iteratively determines the Next-Best-View (NBV) to extend the representation, according to both the reconstruction itself and to avoid collisions with the environment. By computing the expected information gain of a set of candidate scan locations sampled on the as-sensed terrain map, as well as the cost of reaching these candidates, the robot decides the NBV for further exploration. The robot plans an optimal path towards the NBV, avoiding obstacles and un-traversable terrain. Experimental results on both simulated and real-world environments show the capability and efficiency of our system. Finally we present a full system demonstration on the real robot, the ANYbotics ANYmal, autonomously reconstructing a building facade and an industrial structure.

In this paper, we present a large dataset with a variety of mobile mapping sensors collected using a handheld device carried at typical walking speeds for nearly 2.2 km around New College, Oxford as well as a series of supplementary datasets with much more aggressive motion and lighting contrast. The datasets include data from two commercially available devices - a stereoscopic-inertial camera and a multi-beam 3D LiDAR, which also provides inertial measurements. Additionally, we used a tripod-mounted survey grade LiDAR scanner to capture a detailed millimeter-accurate 3D map of the test location (containing ~290 million points). Using the map, we generated a 6 Degrees of Freedom (DoF) ground truth pose for each LiDAR scan (with approximately 3 cm accuracy) to enable better benchmarking of LiDAR and vision localisation, mapping and reconstruction systems. This ground truth is the particular novel contribution of this dataset and we believe that it will enable systematic evaluation which many similar datasets have lacked. The large dataset combines both built environments, open spaces and vegetated areas so as to test localisation and mapping systems such as vision-based navigation, visual and LiDAR SLAM, 3D LiDAR reconstruction and appearance-based place recognition, while the supplementary datasets contain very dynamic motions to introduce more challenges for visual-inertial odometry systems. The datasets are available at:ori.ox.ac.uk/datasets/newer-college-dataset.

In this paper, we propose a method to use semantic information to improve the use of map priors in a sparse, feature-based MonoSLAM system. To incorporate the priors, the features in the prior and SLAM maps must be associated with one another. Most existing systems build a map using SLAM and then align it with the prior map. However, this approach assumes that the local map is accurate, and the majority of the features within it can be constrained by the prior. We use the intuition that many prior maps are created to provide semantic information. Therefore, valid associations only exist if the features in the SLAM map arise from the same kind of semantic object as the prior map. Using this intuition, we extend ORB-SLAM2 using an open source pre-trained semantic segmentation network (DeepLabV3+) to incorporate prior information from Open Street Map building footprint data. We show that the amount of drift, before loop closing, is significantly smaller than that for original ORB-SLAM2. Furthermore, we show that when ORB-SLAM2 is used as a prior-aided visual odometry system, the tracking accuracy is equal to or better than the full ORB-SLAM2 system without the need for global mapping or loop closure.