Reconfigurable intelligent surface (RIS) and index modulation (IM) are two emerging technologies, which show great potentials to achieve green and clean wireless communications, attracting extensive attention in recent years. This paper designs and implements an RIS-based IM transmission scheme that effectively integrates the two techniques. By utilizing the characteristics of RIS to realize flexible control of electromagnetic waves in a reconfigurable manner, IM wireless transmission can be directly realized without conventional radio frequency chains. The proposed approach is validated through the prototype system which is set up based on a fabricated phase-programmable RIS operating in the sub-6GHz frequency band. The experimental results convincingly verify the feasibility of the proposed scheme and suggest that RISs offer a cost-effective hardware architecture to realize IM with massive transmitting antennas.

Reconfigurable intelligent surfaces (RISs) offer an entirely new route to alter the propagation properties of electromagnetic waves and thus control their reflection, refraction, and scattering features in arbitrary manners. Such physical attributes are perceived to bring about fundamental influence on the modern wireless communication system due to the possibilities to establish artificial and controllable propagation environments for radio signals, which no longer rely on the complex encoding, decoding, and other signal processing techniques. Recent studies reveal that the wave manipulation is not the only skill of the RISs. With the rapid developments of space–time digital metasurface and information metasurface, there has been increasing attention focused on the information manipulation via these artificial surfaces. In this article, we provide an overview of the theoretical models of the space–time digital metasurface and information metasurface, the mechanisms of wavefront shaping, and the signal modulations in space and time domains during the wave–matter interactions. We will also address some practical issues during implementations of the reconfigurable intelligent metasurfaces and the associated hardware architectures at microwave frequencies to realize simplified radio frequency transmitters. Several modulation schemes and the corresponding demonstration systems are introduced to illustrate the powerful abilities of the reconfigurable intelligent metasurfaces. Potential research directions of this technique are briefly discussed for their potential applications in future wireless networks.