NET4EXA aims to develop a next-generation high-performance interconnect for HPC and AI systems, addressing the increasing demands of large-scale infrastructures, such as those required for training Large Language Models. Building upon the proven BXI (Bull eXascale Interconnect) European technology used in TOP15 supercomputers, NET4EXA will deliver the new BXI release, BXIv3, a complete hardware and software interconnect solution, including switch and network interface components. The project will integrate a fully functional pilot system at TRL 8, ready for deployment into upcoming exascale and post-exascale systems from 2025 onward. Leveraging prior research from European initiatives like RED-SEA, the previous achievements of consortium partners and over 20 years of expertise from BULL, NET4EXA also lays the groundwork for the future generation of BXI, BXIv4, providing analysis and preliminary design. The project will use a hybrid development and co-design approach, combining commercial switch technology with custom IP and FPGA-based NICs. Performances of NET4EXA BXIv3 interconnect will be evaluated using a broad portfolio of benchmarks, scientific scalable applications, and AI workloads.

To address the growing need for performance from future HPC machines, their processor designs are constantly evolving. Assessing the impact of changes in hardware, software stack, and applications on performance is crucial in every step of a codesign process. Here, we propose a performance projection workflow to facilitate the exploration of design space for multicore nodes and multi-threaded applications. For this purpose, we analyze the architectural efficiency of an accessible source machine and determine the maximum sustainable flop/s performance of a hypothetical target machine based on its software stack on a per-thread basis. Finally, we use these characterizations to project the performance evolution from the source machine to the target machine. In this work, we assess the strengths and weaknesses of our approach by integrating it into the Fugaku-Next Feasibility Study. We compare the accuracy and overhead of our approach with the gem5 cycle-level simulations and a fast exploration methodology based on Machine Code Analyzer (MCA), using NAS Parallel benchmarks and CCS-QCD, a quantum chromodynamics miniapp. The study demonstrates that, compared to gem5, our approach has a prediction deviation of 5% for most cases and up to 30% for extreme cases. Additionally, it exhibits an execution overhead an order of magnitude bigger than MCA but orders of magnitude smaller than gem5. Finally, we demonstrate our approach's capability to study larger scale and more representative applications than gem5, such as QWS and Genesis, two applications of RIKEN optimized for Fugaku.

High-Performance Computing (HPC) is currently facing significant challenges. The hardware pressure has become increasingly difficult to manage due to the lack of parallel abstractions in applications. As a result, parallel programs must undergo drastic evolution to effectively exploit underlying hardware parallelism. Failure to do so results in inefficient code. In this constrained environment, parallel runtimes play a critical role, and their testing becomes crucial. This paper focuses on the MPI interface and leverages the MPI binding tools to develop a multi-language test suite for MPI. By doing so and building on previous work from the Forum document editors, we implement a systematic testing of MPI symbols in the context of the Parallel Computing Validation System (PCVS), which is an HPC validation platform dedicated to running and managing test suites at scale. We first describe PCVS, then outline the process of generating the MPI API test suite, and finally, run these tests at scale. All data sets, code generators, and implementations are made available in open-source to the community. We also set up a dedicated website showcasing the results, which self-updates thanks to the Spack package manager.

In order to enable Exascale computing, next generation interconnection networks must scale to hundreds of thousands of nodes, and must provide features to also allow the HPC, HPDA, and AI applications to reach Exascale, while benefiting from new hardware and software trends. RED-SEA will pave the way to the next generation of European Exascale interconnects, including the next generation of BXI, as follows: (i) specify the new architecture using hardware-software co-design and a set of applications representative of the new terrain of converging HPC, HPDA, and AI; (ii) test, evaluate, and/or implement the new architectural features at multiple levels, according to the nature of each of them, ranging from mathematical analysis and modeling, to simulation, or to emulation or implementation on FPGA testbeds; (iii) enable seamless communication within and between resource clusters, and therefore development of a high-performance low latency gateway, bridging seamlessly with Ethernet; (iv) add efficient network resource management, thus improving congestion resiliency, virtualization, adaptive routing, collective operations; (v) open the interconnect to new kinds of applications and hardware, with enhancements for end-to-end network services - from programming models to reliability, security, low- latency, and new processors; (vi) leverage open standards and compatible APIs to develop innovative reusable libraries and Fabrics management solutions.

HPC systems have experienced significant growth over the past years, with modern machines having hundreds of thousands of nodes. Message Passing Interface (MPI) is the de facto standard for distributed computing on these architectures. On the MPI critical path, the message-matching process is one of the most time-consuming operations. In this process, searching for a specific request in a message queue represents a significant part of the communication latency. So far, no miracle algorithm performs well in all cases. This paper explores potential matching specializations thanks to hints introduced in the latest MPI 4.0 standard. We propose a hash-table-based algorithm that performs constant time message-matching for no wildcard requests. This approach is suitable for intensive point-to-point communication phases in many applications (more than 50% of CORAL benchmarks). We demonstrate that our approach can improve the overall execution time of real HPC applications by up to 25%. Also, we analyze the limitations of our method and propose a strategy for identifying the most suitable algorithm for a given application. Indeed, we apply machine learning techniques for classifying applications depending on their message pattern characteristics.

Since the beginning, MPI has defined the rank as an implicit attribute associated with the MPI process' environment. In particular, each MPI process generally runs inside a given UNIX process and is associated with a fixed identifier in its WORLD communicator. However, this state of things is about to change with the rise of new abstractions such as MPI Sessions. In this paper, we propose to outline how such evolution could enable optimizations which were previously linked to specific MPI runtimes executing MPI processes in shared memory (e.g. thread-based MPI). By implementing runtime-level work-sharing through what we define as MPI tasks, enabling the ability to progress indifferently from stream context we show that there is potential for improved asynchronous progress. In the absence of a Session implementation, this assumption is validated in the context of a thread-based MPI where nonblocking Collective (NBC) were implemented on top of Extended Generic Requests progressed by any rank on the node thanks to an MPI extension enabling threads to dynamically share their MPI context.