Aerial humanoid robots can enhance the efficiency and safety of rescue operations in disaster scenarios. The control of such complex machines presents many challenges, for instance, the control of the different locomotion strategies and the stabilization of the transition maneuvers. In this article, we present an online nonlinear Model Predictive Controller and the relative prediction model to stabilize walking and flying trajectories. The controller uses a reduced model to generate feasible base link references, thrust profiles, and contact forces while dealing with different locomotion strategies and transition maneuvers. The control algorithm is tested in a simulated environment using our aerial humanoid robot iRonCub under the effect of external disturbances. The proposed control strategy demonstrates to effectively stabilize the desired trajectories while keeping the problem still treatable online.

Recent trends in humanoid robot control have successfully employed imitation learning to enable the learned generation of smooth, human-like trajectories from human data. While these approaches make more realistic motions possible, they are limited by the amount of available motion data, and do not incorporate prior knowledge about the physical laws governing the system and its interactions with the environment. Thus they may violate such laws, leading to divergent trajectories and sliding contacts which limit real-world stability. We address such limitations via a two-pronged learning strategy which leverages the known physics of the system and fundamental control principles. First, we encode physics priors during supervised imitation learning to promote trajectory feasibility. Second, we minimize drift at inference time by applying a proportional-integral controller directly to the generated output state. We validate our method on various locomotion behaviors for the ergoCub humanoid robot, where a physics-informed loss encourages zero contact foot velocity. Our experiments demonstrate that the proposed approach is compatible with multiple controllers on a real robot and significantly improves the accuracy and physical constraint conformity of generated trajectories.

Accurate and physically feasible human motion prediction is crucial for safe and seamless human-robot collaboration. While recent advancements in human motion capture enable real-time pose estimation, the practical value of many existing approaches is limited by the lack of future predictions and consideration of physical constraints. Conventional motion prediction schemes rely heavily on past poses, which are not always available in real-world scenarios. To address these limitations, we present a physics-informed learning framework that integrates domain knowledge into both training and inference to predict human motion using inertial measurements from only 5 IMUs. We propose a network that accounts for the spatial characteristics of human movements. During training, we incorporate forward and differential kinematics functions as additional loss components to regularize the learned joint predictions. At the inference stage, we refine the prediction from the previous iteration to update a joint state buffer, which is used as extra inputs to the network. Experimental results demonstrate that our approach achieves high accuracy, smooth transitions between motions, and generalizes well to unseen subjects. The source code and data are available at https://github.com/ami–iit/paper_guo_2025_iros_human_kinematics_prediction.

This paper proposes a novel sensor fusion based on Unscented Kalman Filtering for the online estimation of joint-torques of humanoid robots without joint-torque sensors. At the feature level, the proposed approach considers multimodal measurements (e.g. currents, accelerations, etc.) and non-directly measurable effects, such as external contacts, thus leading to joint torques readily usable in control architectures for human-robot interaction. The proposed sensor fusion can also integrate distributed, non-collocated force/torque sensors, thus being a flexible framework with respect to the underlying robot sensor suit. To validate the approach, we show how the proposed sensor fusion can be integrated into a two-level torque control architecture aiming at task-space torque-control. The performances of the proposed approach are shown through extensive tests on the new humanoid robot ergoCub, currently being developed at Istituto Italiano di Tecnologia. We also compare our strategy with the existing state-of-the-art approach based on the recursive Newton-Euler algorithm. Results demonstrate that our method achieves low root mean square errors in torque tracking, ranging from 0.05 Nm to 2.5 Nm, even in the presence of external contacts.

In this paper we consider the problem of allowing a humanoid robot that is subject to a persistent disturbance, in the form of a payload-carrying task, to follow given planned footsteps. To solve this problem, we combine an online nonlinear centroidal Model Predictive Controller - MPC with a contact stable force parametrization. The cost function of the MPC is augmented with terms handling the disturbance and regularizing the parameter. The performance of the resulting controller is validated both in simulations and on the humanoid robot iCub. Finally, the effect of using the parametrization on the computational time of the controller is briefly studied.

This paper presents a Non-Linear Model Predictive Controller for humanoid robot locomotion with online step adjustment capabilities. The proposed controller considers the Centroidal Dynamics of the system to compute the desired contact forces and torques and contact locations. Differently from bipedal walking architectures based on simplified models, the presented approach considers the reduced centroidal model, thus allowing the robot to perform highly dynamic movements while keeping the control problem still treatable online. We show that the proposed controller can automatically adjust the contact location both in single and double support phases. The overall approach is then tested with a simulation of one-leg and two-leg systems performing jumping and running tasks, respectively. We finally validate the proposed controller on the position-controlled Humanoid Robot iCub. Results show that the proposed strategy prevents the robot from falling while walking and pushed with external forces up to 40 Newton for 1 second applied at the robot arm.

Extended Kalman filtering is a common approach to achieve floating base estimation of a humanoid robot. These filters rely on measurements from an Inertial Measurement Unit (IMU) and relative forward kinematics for estimating the base position-and-orientation and its linear velocity along with the augmented states of feet position-and-orientation. We refer to such filters as flat-foot filters. However, the availability of only partial measurements often poses the question of consistency in the filter design. In this paper, we perform an experimental comparison of state-of-the-art flat-foot filters based on the representation choice of state, observation, matrix Lie group error and system dynamics evaluated for filter consistency and trajectory errors. The comparison is performed over simulated and real-world experiments conducted on the iCub humanoid platform. It is observed that filters on Lie groups that exploit properties of invariant filtering tend to perform better as consistent estimators while discrete-time filters in general provide higher accuracy along observable directions.

This article presents a planner to generate walking trajectories by using the centroidal dynamics and the full kinematics of a humanoid robot. The interaction between the robot and the walking surface is modeled explicitly via new conditions, thedynamic complementarity conditions. The approach does not require a predefined contact sequence and generates the footsteps automatically. We characterize the robot control objective via a set of tasks, and we address it by solving an optimal control problem. We show that it is possible to achieve walking motions automatically by specifying a minimal set of references, such as a constant desired center of mass velocity and a reference point on the ground. Furthermore, we analyze how the contact modeling choices affect the computational time. We validate the approach by generating and testing walking trajectories for the humanoid robot iCub.