Teleoperation with haptic feedback allows users to interact with remote environments while retaining a sense of touch. However, the stability and transparency of these systems are compromised under communication network delay. This paper presents an augmented Model-Mediated Teleoperation with 3D object and dynamic environment tracking (MMT-DET) by a vision-based algorithm, enabling users to receive haptic feedback in structured dynamic environments while maintaining robustness against network delays. A user study comparing the proposed method with teleoperation using the Time Domain Passivity Approach (TDPA) was conducted. The results demonstrate that our MMT-DET exhibits robustness to varying delays in task performance and outperforms TDPA at higher delay levels.

The use of pointed or edged tools or objects is one of the most challenging aspects of today’s application of physical human-robot interaction (pHRI). One reason for this is that the severity of harm caused by such edged or pointed impactors is less well studied than for blunt impactors. Consequently, the standards specify well-reasoned force and pressure thresholds for blunt impactors and advise avoiding any edges and corners in contacts. Nevertheless, pointed or edged impactor geometries cannot be completely ruled out in real pHRI applications. For example, to allow edged or pointed tools such as screwdrivers near human operators, the knowledge of injury severity needs to be extended so that robot integrators can perform well-reasoned, time-efficient risk assessments. In this paper, we provide the initial datasets on injury prevention for the human hand based on drop tests with surrogates for the human hand, namely pig claws and chicken drumsticks. We then demonstrate the ease and efficiency of robot use using the dataset for contact on two examples. Finally, our experiments provide a set of injuries that may also be expected for human subjects under certain robot mass-velocity constellations in collisions. To extend this work, testing on human samples and a collaborative effort from research institutes worldwide is needed to create a comprehensive human injury avoidance database for any pHRI scenario and thus for safe pHRI applications including edged and pointed geometries.

Safety for physical human-robot interaction (pHRI) is a major concern for all application domains. While current standardization for industrial robot applications provide safety constraints that address the onset of pain in blunt impacts, these impact thresholds are difficult to use on edged or pointed impactors. The most severe injuries occur in constrained contact scenarios, where crushing is possible. Nevertheless, situations potentially resulting in constrained contact only occur in certain areas of a workspace and design or organisational approaches can be used to avoid them. What remains are risks to the human physical integrity caused by unconstrained accidental contacts, which are difficult to avoid while maintaining robot motion efficiency. Nevertheless, the probability and severity of injuries occurring with edged or pointed impacting objects in unconstrained collisions is hardly researched. In this paper, we propose an experimental setup and procedure using two pendulums modeling human hands and arms and robots to understand the injury potential of unconstrained collisions of human hands with edged objects. Pig feet are used as ex vivo surrogate samples - as these closely resemble the physiological characteristics of human hands - to create an initial injury database on the severity of injuries caused by unconstrained edged or pointed impacts. For the effective mass range of typical lightweight robots, the data obtained show low probabilities of injuries such as skin cuts or bone/tendon injuries in unconstrained collisions when the velocity is reduced to < 0.5 m/s. Additionally, distinct differences between injury probability of the finger substitutes and the back of the hand substitutes are observed. The proposed experimental setups and procedures should be complemented by sufficient human modeling, e.g. the effective masses of human body parts, and will eventually lead to a complete understanding of the biomechanical injury potential in pHRI.