In the early stages of a novel technology development, it is difficult to provide a comprehensive assessment of its potential capabilities and impact. Nevertheless, some preliminary estimates can be drawn and are certainly of great interest and in this paper we follow this line of reasoning within the framework of the Spin Wave (SW) based computing paradigm. In particular, we are interested in assessing the technological development horizon that needs to be reached in order to unleash the full SW paradigm potential such that SW circuits can outperform CMOS counterparts in terms of energy consumption. In view of the zero power SWs propagation through ferromagnetic waveguides, the overall SW circuit power consumption is determined by the one associated to SWs generation and sensing by means of transducers. While current antenna based transducers are clearly power hungry recent developments indicate that magneto-electric (ME) cells have a great potential for ultra-low power SW generation and sensing. Given that MEs have been only proposed at the conceptual level and no actual experimental demonstration has been reported we cannot evaluate the impact of their utilization on the SW circuit energy consumption. However, we can perform a reverse engineering alike analysis to determine ME delay and power consumption upper bounds that can place SW circuits in the leading position. To this end, we utilize a 32-bit Brent-Kung Adder (BKA) as discussion vehicle and compute the maximum ME delay and power consumption that could potentially enable a SW implementation able to outperform its 7nm CMOS counterpart. We evaluate different BKA SW implementations that rely on conversion- or normalization-based gate cascading and consider continuous or pulsed SW generation scenarios. Our evaluations indicate that 31nW is the maximum transducer power consumption for which a 32-bit Brent-Kung SW implementation can outperform its 7nm CMOS counterpart in terms of energy consumption.

By their very nature, Spin Waves (SWs) excited at the same frequency but different amplitudes, propagate through waveguides and interfere with each other at the expense of ultra-low energy consumption. In addition, all (part) of the SW energy can be moved from one waveguide to another by means of coupling effects. In this paper we make use of these SW features and introduce a novel non Boolean algebra based paradigm, which enables domain conversion free ultra-low energy consumption SW based computing. Subsequently, we leverage this computing paradigm by designing a non-binary spin wave adder, which we validate by means of micro-magnetic simulation. To get more inside on the proposed adder potential we assume a 2-bit adder implementation as discussion vehicle, evaluate its area, delay, and energy consumption, and compare it with conventional SW and 7 nm CMOS counterparts. The results indicate that our proposal diminishes the energy consumption by a factor of$3.14 \times $and$6 \times $, when compared with the conventional SW and 7 nm CMOS functionally equivalent designs, respectively. Furthermore, the proposed non-binary adder implementation requires the least number of devices, which indicates its potential for small chip real-estate realizations.

Having multi-output logic gates saves much energy because the same structure can be used to feed multiple inputs of next stage gates simultaneously. This paper proposes novel triangle shape fanout of 2 spin wave Majority and XOR gates; the Majority gate is achieved by phase detection, whereas the XOR gate is achieved by threshold detection. The proposed logic gates are validated by means of micromagnetic simulations. Furthermore, the energy and delay are estimated for the proposed structures and compared with the state-of-the-art spin wave, and 16 nm and 7 nm CMOS logic gates. The results demonstrate that the proposed structures provide energy reduction of 25%–50% in comparison to the other 2-output spin-wave devices while having the same delay, and energy reduction of 43x-0.8x when compared to the 16 nm and 7 nm CMOS counterparts while having delay overhead of 11x-40x.

Spin Waves (SWs) propagate through magnetic waveguides and interfere with each other without consuming noticeable energy, which opens the road to new ultra-low energy circuit designs. In this paper we build upon SW features and propose a novel energy efficient Full Adder (FA) design consisting of The FA 1 Majority and 2 XOR gates, which outputs Sum and Carry-out are generated by means of threshold and phase detection, respectively. We validate our proposal by means of MuMax3 micromagnetic simulations and we evaluate and compare its performance with state-of-the-art SW, 22nm CMOS, Magnetic Tunnel Junction (MTJ), Spin Hall Effect (SHE), Domain Wall Motion (DWM), and Spin-CMOS implementations. Our evaluation indicates that the proposed SW FA consumes 22.5% and 43% less energy than the direct SW gate based and 22nm CMOS counterparts, respectively. Moreover it exhibits a more than 3 orders of magnitude smaller energy consumption when compared with state-of-the-art MTJ, SHE, DWM, and Spin-CMOS based FAs, and outperforms its contenders in terms of area by requiring at least 22% less chip real-estate.

The key enabling factor for Spin Wave (SW) technology utilization for building ultra low power circuits is the ability to energy efficiently cascade SW basic computation blocks. SW Majority gates, which constitute a universal gate set for this paradigm, operating on phase encoded data are not input output coherent in terms of SW amplitude. Thus, their cascading requires information representation conversion from SW to voltage and back, which is by no means energy effective. In this paper, a novel conversion free SW gate cascading scheme is proposed that achieves SW amplitude normalization by means of a directional coupler. After introducing the normalization concept, we utilize it in the implementation of three simple circuits and, to demonstrate its bigger scale potential, of a 2-bit inputs SW multiplier. The proposed structures are validated by means of the Object Oriented Micromagnetic Framework (OOMMF) and GPU-accelerated Micromagnetics (MuMax3). Furthermore, we assess the normalization induced energy overhead and demonstrate that the proposed approach consumes 1.25× to 1.5× less energy when compared with the transducers based conventional counterpart. Finally, we introduce a normalization based SW 2-bit inputs multiplier design and compare it with functionally equivalent SW transducer based and 16nm CMOS designs. Our evaluation indicates that the proposed approach provided 1.34× and 6.25× energy reductions when compared with the conventional approach and 16nm CMOS counterpart, respectively, which demonstrates that our proposal is energy effective and opens the road towards the full utilization of the SW paradigm potential and the development of SW only circuits.

Due to their very nature, Spin Waves (SWs) created in the same waveguide, but with different frequencies, can coexist while selectively interacting with their own species only. The absence of inter-frequency interferences isolates input data sets encoded in SWs with different frequencies and creates the premises for simultaneous data parallel SW based processing without hardware replication or delay overhead. In this paper we leverage this SW property by introducing a novel computation paradigm, which allows for the parallel processing of n-bit input data vectors on the same basic SW based logic gate. Subsequently, to demonstrate the proposed concept, we present 8-bit parallel 3-input Majority gate implementation and validate it by means of Object Oriented MicroMagnetic Framework (OOMMF) simulations. To evaluate the potential benefit of our proposal we compare the 8-bit data parallel gate with equivalent scalar SW gate based implementation. Our evaluation indicates that 8-bit data 3-input Majority gate implementation requires 4.16x less area than the scalar SW gate based equivalent counterpart while preserving the same delay and energy consumption figures.

To bring Spin Wave (SW) based computing paradigm into practice and develop ultra low power Magnonic circuits and computation platforms, one needs basic logic gates that operate and can be cascaded within the SW domain without requiring back and forth conversion between the SW and voltage domains. To achieve this, SW gates have to possess intrinsic fanout capabilities, be input-output data representation coherent, and reconfigurable. In this paper, we address the first and the last requirements and propose a novel 4-output programmable SW logic gate. First, we introduce the gate structure and demonstrate that, by adjusting the gate output detection method, it can parallelly evaluate any 4-element subset of the 2-input Boolean function set {(N)AND, (N)OR, and X(N)OR}. Furthermore, we adjust the structure such that all its 4 outputs produce SWs with the same energy and demonstrate that it can evaluate Boolean function sets while providing fanout capabilities ranging from 1 to 4. We validate our approach by instantiating and simulating different gate configurations such as 4-output AND/OR, 4-output XOR/XNOR, output energy balanced 4-output AND/OR, and output energy balanced 4-output XOR/XNOR by means of Object Oriented Micromagnetic Framework (OOMMF) simulations. Finally, we evaluate the performance of our proposal in terms of delay and energy consumption and compare it against existing state-of-the-art SW and 16 nm CMOS counterparts. The results indicate that for the same functionality, our approach provides 3× and 16× energy reduction, when compared with conventional SW and 16 nm CMOS implementations, respectively.

This paper presents a single-stage power management unit to boost and regulate a low supply voltage for CMOS system-on-chip (SoC) applications. It consists of low-leakage, enhanced Dickson charge pump (DCP) that utilizes both stage and frequency modulation (FM) techniques to achieve high efficiency and lower area. In addition, the proposed design uses an enhanced stage-switch structure for the charge pump, which significantly reduces the cross-stage leakage. A stage number controller is used to control the gain of the charge pump by changing the number of stages based on the desired output voltage. FM is utilized to further fine-tune the output voltage through a closed-loop control based on a predetermined reference voltage. Silicon measurement results for the four-stage charge pump in 65-nm CMOS technology show a maximum end-to-end efficiency of 66% at an input voltage of 0.7 V and an output power of$27~\mu \text{W}$. The proposed design achieved more than a$100\times $reduction in leakage compared to traditional DCP. The system supports a range of load currents between 0.1 and$34~\mu \text{A}$with a maximum operating frequency of 1.8 MHz. The proposed system supports an input voltage range of 0.55–0.7 V which makes it an excellent candidate for solar and thermal energy-harvesting applications targeting low-power internet-of-things SOC.

This paper presents a single stage power management unit that includes an enhanced stage-switch Dickson charge pump (DCP) to boost and regulate a low input voltage. A new switching mechanism is presented to significantly reduce the losses encountered in conventional DCP switches. Frequency and stage modulation are utilized in the proposed design. The stage modulation provides different gain levels (coarse) and the frequency modulation tunes the voltage level and regulates the output voltage based on a pre-determined reference voltage. Using four stages charge pump, silicon measurement results in 65 nm CMOS technology show a maximum efficiency of 66% at input voltage of 0.7 V and output power of 27 μW. The system supports a range of load current between 0.1 μA − 34 μA with a maximum operating frequency of 1.8MHz. The proposed system supports an input voltage range from 0.55 to 0.7 V which can be used in energy harvesting applications such as solar and thermal harvesting.