WiFi-based device-free motion tracking systems track persons without requiring them to carry any device. Existing work has explored signal parameters such as time-of-flight (ToF), angle-of-arrival (AoA), and Doppler-frequency-shift (DFS) extracted from WiFi channel state information (CSI) to locate and track people in a room. However, they are not robust due to unreliable estimation of signal parameters. ToF and AoA estimations are not accurate for current standards-compliant WiFi devices that typically have only two antennas and limited channel bandwidth. On the other hand, DFS can be extracted relatively easily on current devices but is susceptible to the high noise level and random phase offset in CSI measurement, which results in a speed-sign-ambiguity problem and renders ambiguous walking speeds. This paper proposes WiTraj, a device-free indoor motion tracking system using commodity WiFi devices. WiTraj improves tracking robustness from three aspects: 1) It significantly improves DFS estimation quality by using the ratio of the CSI from two antennas of each receiver, 2) To better track human walking, it leverages multiple receivers placed at different viewing angles to capture human walking and then intelligently combines the best views to achieve a robust trajectory reconstruction, and, 3) It differentiates walking from in-place activities, which are typically interleaved in daily life, so that non-walking activities do not cause tracking errors. Experiments show that WiTraj can significantly improve tracking accuracy in typical environments compared to existing DFS-based systems. Evaluations across 9 participants and 3 different environments show that the median tracking error$<2.5\%$for typical room-sized trajectories.

Sleep monitoring is essential to people's health and wellbeing, which can also assist in the diagnosis and treatment of sleep disorder. Compared with contact-based solutions, contactless sleep monitoring does not attach any device to the human body; hence, it has attracted increasing attention in recent years. Inspired by the recent advances in Wi-Fi-based sensing, this article proposes a low-cost and nonintrusive sleep monitoring system using commodity Wi-Fi devices, namely, WiFi-Sleep. We leverage the fine-grained channel state information from multiple antennas and propose advanced fusion and signal processing methods to extract accurate respiration and body movement information. We introduce a deep learning method combined with clinical sleep medicine prior knowledge to achieve four-stage sleep monitoring with limited data sources (i.e., only respiration and body movement information). We benchmark the performance of WiFi-Sleep with polysomnography, the gold reference standard. Results show that WiFi-Sleep achieves an accuracy of 81.8%, which is comparable to the state-of-the-art sleep stage monitoring using expensive radar devices.

Recent years have witnessed advances of Internet of Things (IoT) technologies and their applications to enable contactless sensing and human-computer interaction in smart homes. For people with motor neurone disease (MND), their motion capabilities are severely impaired and they have difficulties interacting with IoT devices and even communicating with other people. As the disease progresses, most patients lose their speech function eventually which makes the widely adopted voice-based solutions fail. In contrast, most of the patients can still move their fingers slightly even after they have lost the control of their arms and hands. Thus, we propose to develop a Morse code-based text input system, called WiMorse, which allows patients with minimal single-finger control to input and communicate with other people without attaching any sensor to their fingers. WiMorse leverages ubiquitous commodity WiFi devices to track subtle finger movements contactlessly and encode them as Morse code input. In order to sense the very subtle finger movements, we propose to employ the ratio of the channel state information (CSI) between two antennas to enhance the signal to noise ratio. To address the severe location dependency issue in wireless sensing with accurate theoretical underpinning and experiments, we propose a signal transformation mechanism to automatically convert signals based on the input position, achieving stable sensing performance. Comprehensive experiments demonstrate that WiMorse can achieve higher than 95% recognition accuracy for finger generated Morse code, and is robust against input position, environment changes, and user diversity.