Vegetation optical depth (VOD) depends on the water, structure, and biomass of vegetation. Here, we propose a multi-sensor approach to isolate the water component from the VOD and to retrieve gravimetric vegetation moisture (mg) in the western United States. The approach estimates VOD from radar and LiDAR data and minimizes the differences between these estimates and SMAP/AMSR2 VOD observations. This minimization allows to obtain the best fitting value of mgwith help of a dielectric model. Results are consistent both in space (drier vegetation in arid areas) and time (drier vegetation in drier months). The mg estimates are in the same range than in situ mg data, with some underestimation (bias ~ -0.07 kg/kg). Statistical results are reasonable (r ~ 0.45, RMSE ≤0.10 kg/kg), yet the different spatial and temporal representation of in situ and remote measurements have an impact in the direct comparisons. Our results highlight the potential for developing new vegetation moisture datasets based on VOD decomposition.

Vegetation optical depth (VOD) depends on the water, structure, and biomass of vegetation. Here, we propose a multi-sensor approach to isolate the water component from the VOD and to retrieve gravimetric vegetation moisture (mg) in the western United States. The approach estimates VOD from radar and LiDAR data and minimizes the differences between these estimates and SMAP/AMSR2 VOD observations. This minimization allows to obtain the best fitting value of mgwith help of a dielectric model. Results are consistent both in space (drier vegetation in arid areas) and time (drier vegetation in drier months). The mg estimates are in the same range than in situ mg data, with some underestimation (bias ~ -0.07 kg/kg). Statistical results are reasonable (r ~ 0.45, RMSE ≤0.10 kg/kg), yet the different spatial and temporal representation of in situ and remote measurements have an impact in the direct comparisons. Our results highlight the potential for developing new vegetation moisture datasets based on VOD decomposition.

A joint approach for estimating vertically continuous soil moisture profiles by combining P-band SAR polarimetry with soil hydrological modeling is proposed. The approach compares the decomposed soil scattering component from remotely sensed P-band SAR observations of NASA’s Airborne Microwave Observatory of Subcanopy and Subsurface (AirMOSS) mission with an ensemble of simulated counterparts based on the hydrological model HYDRUS-1D and the soil scattering model multi-layer small perturbation method (SPM). From the best fit between remote sensing and soil modeling, the most probable soil moisture profile can be retrieved. Estimated soil moisture profiles at individual monitoring stations across the U.S. are compared to in situ measurements, as well as the European ReAnalysis (ERA5) land and AirMOSS L4 products. Pearson’s coefficient of determination between estimated and auxiliary products prove the overall feasibility of the proposed method with respective R2of 0.92, 0.95, and 0.87.

This study presents a comparison between satellite-based vegetation optical depth (VOD) from multi-frequency radiometry (X-, C- and L-band), VOD-derived relative water content (RWC) and auxiliary data (e.g., evapotranspiration and soil moisture), which are investigated for their sensitivity to water status of tree canopies under dry and wet conditions for a temperate forest in Thuringia, Central Germany. For this, we estimated RWC directly from VOD normalization assuming no major changes in vegetation biomass or plant structure during the study period (2015-2019).Our results show that RWC seasonalities are aligned for all investigated frequencies showing its maximum in early summer when leaves and twigs of the top and low canopy are particularly wet and photosynthetically active. Investigating drought versus non-drought years, we observed that X-band RWC is the one better capturing drought status by exhibiting low values in the extreme drought year 2018 compared to the wet year 2017 while L-band RWC reflects the ecological memory from the extreme drought conditions in 2018 in year 2019 estimates.

Tracking seasonal dynamics of evapotranspiration (ET) across global biomes and along seasonal time periods using remote sensing is vital for monitoring ecosystem health and indicating early signals of drought. In this study, we assess the potential of adding weather and illumination-independent signals from active and passive microwave remote sensing (SAR backscatter & vegetation optical depth, VOD) to the established set of ET products, like from optical/thermal remote sensing (MODIS, SEVIRI) and reanalysis (ERA-5 land, GLDAS) data.Our study covers a four-year period (2017-2020), including dry (2018 & 2019) and wet (2017) years. The study was conducted over eight ICOS sites across Europe. These sites are predominantly forested with a low biomass dynamic over the observation period.We find that the ET products from in situ Eddy Covariance (EC), MODIS, and GLDAS deviate relatively minor along the seasons (< 1 [mm/day]), but differ between years. Here, the years (2017-2020) indicate a slightly different ET rate between in situ measurements (EC) and derived products (MODIS & GLDAS), which is currently being investigated. The microwave-based indicators (backscatter & VOD) are proxies by their nature and serve as first-order indicators of relative dynamics allowing the identification of seasonal patterns of ET as well as their spatio-temporal anomalies along both dry and wet years.

Accurate soil carbon data are important for understanding the permafrost response and potential carbon release to future climate change. However, there is a large discrepancy in current soil organic carbon (SOC) estimates in the Arctic, where sparse measurements are unable to capture SOC complexity over the vast and remote region. Polarimetric Synthetic Aperture Radar (SAR) data are sensitive to roughness and moisture conditions of soil and vegetation, and may provide useful information on surface and profile SOC properties ( Yi et al., 2021 , 2022 ). The NASA Arctic Boreal Vulnerability Experiment (ABoVE) airborne campaign acquired an abundance of full-polarimetric P- and L-band SAR data across Alaska and western Canada ( Miller et al., 2019 ), which provides opportunities to test new remote sensing applications. The main objective of this study is to investigate the potential of low-frequency polarimetric SAR data for regional SOC retrieval in the Arctic through data analysis and modeling. We chose the Alaska North Slope as our study area due to more in-situ data available in this area.

The attenuation of microwave emissions through the canopy is quantified by the vegetation optical depth (VOD), which is related to the amount of water, the biomass and the structure of vegetation. To provide microwave-derived plant water estimates, one must account for biomass/structure contributions in order to extract the water component from the VOD. This study uses Aquarius scatterometer data to build an L-band global seasonality of vegetation volume fraction (δ), representative of biomass/structure dynamics. The dynamic range of δ is adapted for its application in a gravimetric moisture (Mg) retrieval model. Results show that δ ranging from 0 to 3.35.10-4is needed for modelling physically reasonable Mg values. The global average of δ shows consistent spatial patterns across vegetation distributions, and δ seasonality is coherent with the phenology of the studied vegetation types. These findings enable the separation of information on vegetation water and biomass/structure inherent within VOD.

A method for estimating complex soil permittivity (or moisture) and penetration depth based on SAR decomposition is presented. By combining model- and eigen-based decomposition techniques, SAR observations are separated into single scattering components (from soil & vegetation). The proposed method incorporates a multi-layer rough surface scattering model to simulate the soil scattering contribution. From the decomposed soil scattering component, permittivity and thus penetration depth can be estimated from SAR observations. Results are presented for the AirMOSS campaign within the MOISST site, OK, USA. As first results, a median value of 16.44 + 2.02 for the complex permittivity was estimated from the 19 P-band data takes at the SoilSCAPE in situ station in Canton, OK, USA. Overall, the retrieval results for the real part of the complex permittivity are similar to in situ values at 30 cm soil depth, with differences in respective median values of 3.44. The median of penetration depths at the Canton site is 23.91 cm,

A retrieval methodology for forest water potential from ground-based L-band radiometry is proposed. It contains the estimation of the gravimetric and the relative water content of a forest stand and tests in situ- and model-based functions to transform these estimates into forest water potential. The retrieval is based on vegetation optical depth data from a tower-based experiment of the SMAPVEX 19–21 campaign for the period from April to October 2019 at Harvard Forest, MA, USA. In addition, comparison and validation with in situ measurements on leaf and xylem water potential as well as on leaf wetness and complex permittivity are foreseen to understand limitations and potentials of the proposed approach. As a first result the radiometer-based water potential estimates of the forest stand are concurrent in time and similar in value with their in situ (xylem) counterparts from single trees in the radiometer footprint.

The upcoming launch of the L-band Synthetic Aperture Radar (SAR) satellite mission Radar Observing System for Europe L-band SAR (ROSE-L) will enable multi-frequency SAR observations when combined with existing C-band satellite missions (e.g., Sentinel-1). Due to the different penetration depths of the SAR signals, multi-frequency SAR offers great potential for field-scale agricultural monitoring and the estimation of soil and plant parameters. The SARSense campaign, conducted between June and August 2019 at the Selhausen agricultural test site near Jülich, Germany, has yielded a comprehensive dataset that includes both air- and space-borne C- and L-band SAR data, extensive in-situ field measurements of soil and plant parameters as well as unmanned aerial systems (UAS)-based multispectral and thermal infrared measurements and cosmic neutron sensing observations. The study provides both, an insight into the strengths and limitations of the acquired dataset as well as an analysis of the different behaviour of C- and L-band backscattering on changing soil moisture and plant parameters for taproot crops and cereals.

An active–passive microwave retrieval algorithm for simultaneous determination of soil surface roughness parameters [vertical root-mean-square (RMS) height (${s}$) and horizontal correlation length (${l}$)] is presented for bare soils. The algorithm is based on active–passive microwave covariation, including the improved Integral Equation Method (I2EM), and is tested with global soil moisture active passive (SMAP) observations. The estimated retrieval results for${s}$and${l}$are overall consistent with values in the literature, indicating the validity of the proposed algorithm. Sensitivity analyses showed that the developed roughness retrieval algorithm is independent of permittivity for${\varepsilon }_{s} > 10$[-]. Furthermore, the physical model basis of this approach (I2EM) allows the application of different autocorrelation functions (ACF), such as Gaussian and exponential ACFs. Global roughness retrieval results confirm bare areas in deserts such as Sahara or Gobi. However, the type of ACF used within roughness parameter estimation is important. Retrieval results for the Gaussian ACF describe a rougher surface than retrieval results for the exponential ACF. No correlations were found between roughness results and the amount of precipitation or the soil texture, which could be due to the coarse spatial resolution of the SMAP data. The extension of this approach to vegetated soils is planned as an add-on study.

In summer 2019 the SARSense campaign was held in Jülich, Germany, to provide insights into the potentials and specifications of the ESA Copernicus candidate mission ROSE-L (Radar Observation System for Europe). ROSE-L will consist of two satellites that carry a polarimetric L-band SAR. Since the L-band signal can penetrate through many natural materials such as vegetation, dry snow and ice, the mission will provide additional information that cannot be gathered by the Copernicus Sentinel-1 C-band SAR mission. The overall objective of the SARSense 2019 campaign is to analyze the mission design concerning its potential for agricultural monitoring services including target applications such as soil moisture monitoring, irrigation management, crop type discrimination, food security and precision farming. The SARSense in situ measurements of soil moisture, soil temperature, vegetation properties, UAS-based multispectral and thermal mapping, as well as the airborne SAR observations are presented as well as strategies for soil moisture retrieval and first analysis.

A considerable amount of water can be stored in vegetation, especially in regions experiencing large quantities of precipitation (mid-latitudes). In this context, an accurate estimate of the actual water status of the vegetation could lead to an improved understanding of the effect of plant water on the water budget. In this study, we developed and validated a novel approach to retrieve the vegetation volume fraction (δ) (i.e., volume percentage of solid plant material of a canopy in air) and the gravimetric vegetation water content (mg) (i.e., amount of water per wet biomass) for winter wheat. The estimation was based on the attenuation of L-band microwave measurements through vegetation (vegetation optical depth, (τ)-parameter). Ground-based L-band microwave measurements over an entire growing cycle together with in situ measured vegetation characteristics have been used for this purpose. Retrieved δ- and mg-values revealed to be comparable to literature and in situ measurements (i.e., δ was within the range between 0 and 0.01 and the retrieved mghad a mean value of 0.58 (0.55 (in situ) and 0.54 (literature))). Finally, we also tested the sensitivity of the δ- and mg-retrievals to their input-values to investigate their possible mutual dependencies. The analysis showed that already small changes in the input-mgor -δ result in relatively large changes in the retrieved δ or mg.

A method of physical integration of electromagnetic (EM) interaction models is presented here to estimate the backscattering coefficient (BSC) for L-band, brightness temperature (TB) for L- and C-Band and the reflectance for visible (VIS) and near-infrared (NIR) region for dynamic vegetated terrain. The SPIN (Spectrum Invariant Interaction) model is obtained by solving vector radiative transfer (VRT) equations kernel-based and therefore for different wave interaction mechanisms. To demonstrate its application for the microwave region, the measurements during the growing cycle of corn from the Eleventh Microwave, Water, and Energy Balance Experiment (MicroWEX-11) have been used. For the optical part the results are compared with the PROSAIL model. By applying the SPIN model in the radar regime, it could be shown that the modeled backscattering coefficients (BSC) correlate strongly with the vertical polarization measurements (Pearson 0.83, R20.69) and are less correlated with the horizontal measurements (Pearson 0.45, R20.20). In addition, the modeled brightness temperatures (L- and C-band) in both polarization states are also correlated with the MicroWEX-11 measurements (L-band: Pearson 0.755, R20.57; C-band: Pearson 0.73, R20.53). Finally, the optical results are consistent with the results of other standard optical models (Pearson 0.99, R20.98), like PROSAIL.

Soil roughness strongly influences processes like erosion, infiltration, moisture and evaporation of soils as well as growth of agricultural plants. An approach to soil roughness based on active-passive microwave covariation is proposed in order to simultaneously retrieve the vertical RMS height (s) and horizontal correlation length (l) of soil surfaces from simultaneously measured radar and radiometer microwave signatures. The approach is based on a retrieval algorithm for active-passive covariation including the improved Integral Equation Method (I2EM). It is tested with the global active-passive microwave observations of NASA's Soil Moisture Active Passive (SMAP) mission. The developed roughness retrieval algorithm shows independence of permittivity for εs> 10 [-] due to the covariation formalism. Results reveal that s and l can be estimated simultaneously by the proposed approach since surface patterns of nonvegetated areas can be assessed on global scale. In regions with sandy deserts, like the Sahara or the outback in Australia, determined s and l confirm rather smooth to semi-rough surface roughness patterns with most frequent vertical RMS heights smaller 3 cm and corresponding higher horizontal correlation lengths (> 8 cm).

In the past the effect of soil roughness was often considered secondary within the determination of soil moisture from remote sensing data. Several studies showed that accurate determination of soil roughness leads to an improved estimation of soil moisture. Two standard parameters in microwave sensing to describe the surface roughness are the standard deviation of the surface height variation s and the surface correlation length l with its corresponding autocorrelation function (ACF). Both parameters (s, l) affect the emissivity measured by radiometers as well as the backscattering observed by radars. In this study, we develop a physics-based approach to retrieve s and l by combining both microwave signals based on active-passive microwave covariation. To test the approach, containing a forward model and a retrieval algorithm, we used active/passive microwave data measured with the ComRAD truck-based SMAP simulator at L-band. Results and validations with corresponding field measurements on ground show that s and l can be estimated when using this approach. The physics-based retrieval algorithm works robustly for two investigated test fields having an RMS-Error of 0.68 cm and 0.69 cm between the microwave-based and field-measured s-values, and of 3.13 cm and 3.04 cm for l-values. Validation of the results reveals that the influence of the ACF, needed within the retrieval, is distinct.