Speech dereverberation aims to alleviate the detrimental effects of late-reverberant components. While the weighted prediction error (WPE) method has shown superior performance in dereverberation, there is still room for further improvement in terms of performance and robustness in complex and noisy environments. Recent research has highlighted the effectiveness of integrating physics-based and data-driven methods, enhancing the performance of various signal processing tasks while maintaining interpretability. Motivated by these advancements, this paper presents a novel dereverberation framework for the single-source case, which incorporates data-driven methods for capturing speech priors within the WPE framework. The plug-and-play (PnP) framework, specifically the regularization by denoising (RED) strategy, is utilized to incorporate speech prior information learnt from data during the optimization problem solving iterations. Experimental results validate the effectiveness of the proposed approach.

Reverberation impairs not only the speech quality, but also intelligibility. The weighted-prediction-error (WPE) method, which estimates the late reverberation component based on a multichannel linear predictor, is by far one of the most effective algorithms for dereverberation. Generally, the WPE prediction filter in every short-time-Fourier-transform (STFT) subband has to be long enough to estimate accurately the late reverberation component. As a consequence, WPE is computationally expensive, which makes it difficult to implement into real-time embedded or edge computing devices. Moreover, WPE is sensitive to additive noise and its performance may suffer from dramatic degradation even in environments where the signal-to-noise ratio (SNR) is high. To address these drawbacks, this letter proposes to decompose the multichannel linear prediction filter as a Kronecker product of a temporal (interframe) prediction filter and a spatial filter. An iterative algorithm is then developed to optimize the two filters. In comparison with the original WPE algorithm, the presented method not only exhibits better performance in terms of dereverberation and robustness to additive noise, as there are fewer parameters to estimate for a given number of observation signal samples, but is also computationally more efficient, since the dimensions of the covariance matrices after Kronecker product decomposition are smaller.

Differential microphone arrays (DMAs) have been used in a wide range of applications for high-fidelity acoustic signal acquisition and enhancement. In the design of differential beamformers, three of the widely used measures are the directivity factor (DF), the front-to-back ratio (FBR), and the white noise gain (WNG). The former two have been used to obtain optimal differential beamformers, e.g., the hypercardioid and supercardioid, and the third one is generally used to analyze and control the robustness of the beamformer with respect to array imperfections due to sensors' self noise, mismatch among sensors, and sensors' placement errors. In this paper, we present a new measure called directivity factor and front-to-back ratio (DFBR), which is a generalization of DF and FBR. With this new measure, three different kinds of beamformers are derived. The first one is the maximum DFBR beamformer, which is deduced by maximizing DFBR with a joint diagonalization method. The second one is the ψ-cardioid beamformer, which is the maximum DFBR beamformer corresponding to a distortionless constraint. The last one is the reduced-rank differential beamformer, which is obtained by properly choosing the dimension of the signal subspace and maximizing WNG subject to the distortionless constraint. The developed beamformers have many interesting properties, which are justified by both simulations and experiments.

This paper proposes a method for the design of flexible Kronecker product beamformers based on the decomposition of the steering vector of a physical array as a Kronecker product of steering vectors of two smaller virtual arrays. With this decomposition, the global beamforming filter is designed by optimizing the two sub-beamformers in a cascaded manner, which can offer much flexibility to control the performance of beamforming or control the compromise between different, conflicted performance measures. In comparison with a recently developed method that restricts the number of microphones of the given physical array to a multiplication of two integers, each corresponding to the number of sensors of one virtual array, the approach in this work decomposes the physical array in such a way that the sensors in the two virtual arrays may share positions and the number of microphones of the physical array can be any positive integer. Simulations demonstrate the properties of the proposed approach.