Photoacoustic (PA) images utilize pulsed lasers and ultrasound transducers to visualize targets with higher optical absorption than the surrounding medium. However, they are susceptible to acoustic clutter and background noise artifacts that obfuscate biomedical structures of interest. We investigated three spatial-angular compounding methods to improve PA image quality for biomedical applications, implemented by combining multiple images acquired as an ultrasound probe was rotated about the elevational axis with the laser beam and target fixed. Compounding with conventional averaging was based on the pose information of each PA image, while compounding with weighted and selective averaging utilized both the pose and image content information. Weighted-average compounding enhanced PA images with the least distortion of signal size, particularly when there were large (i.e., 2.5 mm and 7 (°)) perturbations from the initial probe position. Selective-average compounding offered the best improvement in image quality with up 181, 1665, and 1568 times higher contrast, CNR, and SNR, respectively, compared to the mean values of individual PA images. The three presented spatial compounding methods have promising potential to enhance image quality in multiple photoacoustic applications.

We are investigating the use of photoacoustic (PA) imaging to detect critical structures, such as the carotid artery, that may be located behind the bone being drilled during robot-assisted endonasal transsphenoidal surgery. In this system, the laser is mounted on the drill (via an optical fiber) and the 2D ultrasound (US) probe is placed elsewhere on the skull. Both the drill and the US probe are tracked relative to the patient reference frame. PA imaging provides two advantages compared to conventional B-mode US: (1) the laser penetrates thin layers of bone, and (2) the PA image displays targets that are in the laser path. Thus, the laser can be used to (non-invasively) extend the drill axis, thereby enabling reliable detection of critical structures that may reside in the drill path. This setup creates a challenging alignment problem, however, because the US probe must be placed so that its image plane intersects the laser line in the neighborhood of the target anatomy (as estimated from preoperative images). This paper reports on a navigation system developed to assist with this task, and the results of phantom experiments that demonstrate that a critical structure can be detected with an accuracy of approximately 1 mm relative to the drill tip.