Semantic-and task-oriented communication has emerged as a promising approach to reducing the latency and bandwidth requirements of the next-generation mobile networks by transmitting only the most relevant information needed to complete a specific task at the receiver. This is particularly advantageous for machine-oriented communication of high-data-rate content, such as images and videos, where the goal is rapid and accurate inference, rather than perfect signal reconstruction. While semantic-and task-oriented compression can be implemented in conventional communication systems, joint source–channel coding (JSCC) offers an alternative end-to-end approach by optimizing compression and channel coding together, or even directly mapping the source signal to the modulated waveform. Although all digital communication systems today rely on separation, thanks to its modularity, JSCC is known to achieve higher performance in finite blocklength scenarios and to avoidcliffand theleveling-off effectsin time-varying channel scenarios. This article provides an overview of the information theoretic foundations of JSCC, surveys practical JSCC designs over the decades, and discusses the reasons for their limited adoption in practical systems. We then examine the recent resurgence of JSCC, driven by the integration of deep learning techniques, particularly through DeepJSCC, highlighting its many surprising advantages in various scenarios. Finally, we discuss why it may be time to reconsider today’s strictly separate architectures and reintroduce JSCC to enable high-fidelity, low-latency communications in critical applications such as autonomous driving, drone surveillance, or wearable systems.

Semantic communication, when examined through the lens of joint source-channel coding (JSCC), maps source messages directly into channel input symbols, where the measure of success is defined by end-to-end distortion rather than traditional metrics such as block error rate. Previous studies have shown significant improvements achieved through deep learning (DL)-driven JSCC compared to traditional separate source and channel coding. However, JSCC is impractical in existing communication networks, where application and network providers are typically different entities connected over general-purpose TCP/IP links. In this paper, we propose designing the source and channel codes separately and sequentially via a novel multi-level reliability interface. This conceptual interface enables JSCC at both the learned source and channel mappers and achieves many of the gains observed in existing DL-based JSCC work (which would require a fully joint design between the application and the network), such as lower end-to-end distortion and graceful degradation of distortion with channel quality. We believe this work represents an important step towards realizing semantic communications in wireless networks.

Recently, deep autoencoders have gained traction as a powerful method for implementing goal-oriented semantic communications systems. The idea is to train a mapping from the source domain directly to channel symbols, and vice versa. However, prior studies often focused on rate-distortion tradeoff and transmission delay, at the cost of increasing end-to-end complexity and thus latency. Moreover, the datasets used are often not reflective of real-world environments, and the results were not validated against real-world baseline systems, leading to an unfair comparison. In this paper, we study the problem of remote camera pose estimation and propose AdaSem, an adaptive semantic communications approach that optimizes the tradeoff between inference accuracy and end-to-end latency. We develop an adaptive semantic codec model, which encodes the source data into a dynamic number of symbols, based on the latent space distribution and the channel state feedback. We utilize a lightweight model for both transmitter and receiver to ensure comparable complexity to the baseline implemented in a real- world system. Extensive experiments on real-environment data show the effectiveness of our approach. When compared to a real implementation of a client-server camera relocalization service, AdaSem outperforms the baseline by reducing the end-to-end delay and estimation error by over 75% and 63%, respectively.

In this work, we study the problem of communicating multiple samples from an unknown probability distribution using as few bits as possible. This is a generalization of the channel simulation problem, which has recently found applications and achieved state of the art results in realistic image compression, neural network compression, and communication-efficient federated learning. In this problem, the transmitter wants the receiver to generate multiple independent and identically distributed (i.i.d.) samples from a target distribution $P$, while the transmitter and the receiver have access to independent samples from a reference distribution $Q$. The core idea is to employ channel simulation in multiple rounds while updating the reference distribution $Q$ after each round in order to reduce the KL-divergence between $P$ and $Q$, thereby reducing the communication cost in subsequent rounds. We derive a lower bound on the expected communication cost and construct a practical algorithm that achieves the lower bound up to a multiplicative constant. We then employ this algorithm in communication-efficient federated learning, in which model updates correspond to samples from a distribution, and achieve a 37% reduction in the communication load. To further highlight the potential of sample communication for generative models, we show that the number of bits needed to communicate samples from a large language model can be reduced by up to 16 times, compared to entropy-based data compression.

Deep learning driven joint source-channel coding (JSCC) for wireless image or video transmission, also called DeepJSCC, has been a topic of interest recently with very promising results. The idea is to map similar source samples to nearby points in the channel input space such that, despite the noise introduced by the channel, the input can be recovered with minimal distortion. However, the inherent correlation between the source sample and channel input makes DeepJSCC vulnerable to eavesdropping attacks. In this paper, we propose the first DeepJSCC scheme for wireless image transmission that is secure against eavesdroppers, called DeepJSCEC. The proposed solution not only preserves the results demonstrated by DeepJSCC, it also provides security against chosen-plaintext attacks from the eavesdropper, without the need to make assumptions about the eavesdropper's channel condition or its intended use of the intercepted signal.

Consider an agent/decoder placed at a fixed vertex of a known directed weighted graph. The controller/encoder observes the location of a target placed at another random vertex of the graph, and its goal is to help the agent to reach this target with the minimal total cost, dictated by the weights of the edges traversed on the way. The encoder can transmit only a limited number of bits to the decoder at each step of the algorithm. Our goal is to identify the optimal trade-off between the available communication budget and the average total cost. We formulate this problem as a goal-oriented compression problem with decoder constraints, which generalizes classical lossless compression problems. We show that this problem is in general NP-complete, and construct several suboptimal algorithms for solving it in polynomial-time with bounds on their suboptimality gap. We also show a lower bound on the expected cost for any coding scheme, assuming unit cost for each transition.

Recent works have shown that joint source-channel coding (JSCC) schemes using deep neural networks (DNNs), called DeepJSCC, provide promising results in wireless image transmission. However, these methods mostly focus on the distortion of the reconstructed signals with respect to the input image, rather than their perception by humans. However, focusing on traditional distortion metrics alone does not necessarily result in high perceptual quality, especially in extreme physical conditions, such as very low bandwidth compression ratio (BCR) and low signal-to-noise ratio (SNR) regimes. In this work, we propose two novel JSCC schemes that leverage the perceptual quality of deep generative models (DGMs) for wireless image transmission, namely InverseJSCC and GenerativeJSCC. While the former is an inverse problem approach to DeepJSCC, the latter is an end-to-end optimized JSCC scheme. In both, we optimize a weighted sum of mean squared error (MSE) and learned perceptual image patch similarity (LPIPS) losses, which capture more semantic similarities than other distortion metrics. InverseJSCC performs denoising on the distorted reconstructions of a DeepJSCC model by solving an inverse optimization problem using the pre-trained style-based generative adversarial network (StyleGAN). Our simulation results show that InverseJSCC significantly improves the state-of-the-art DeepJSCC in terms of perceptual quality in edge cases. In GenerativeJSCC, we carry out end-to-end training of an encoder and a StyleGAN-based decoder, and show that GenerativeJSCC significantly outperforms DeepJSCC both in terms of distortion and perceptual quality.

Recent works have shown that the task of wireless transmission of images can be learned with the use of machine learning techniques. Very promising results in end-to-end image quality, superior to popular digital schemes that utilize source and channel coding separation, have been demonstrated through the training of an autoencoder, with a non-trainable channel layer in the middle. However, these methods assume that any complex value can be transmitted over the channel, which can prevent the application of the algorithm in scenarios where the hardware or protocol can only admit certain sets of channel inputs, such as the use of a digital constellation. Herein, we propose DeepJSCC-Q, an end-to-end optimized joint source-channel coding scheme for wireless image transmission, which is able to operate with a fixed channel input alphabet. We show that DeepJSCC-Q can achieve similar performance to models that use continuous-valued channel input. Importantly, it preserves the graceful degradation of image quality observed in prior work when channel conditions worsen, making DeepJSCC-Q much more attractive for deployment in practical systems.

We presentDeepWiVe, the first-ever end-to-end joint source-channel coding (JSCC) video transmission scheme that leverages the power of deep neural networks (DNNs) to directly map video signals to channel symbols, combining video compression, channel coding, and modulation steps into a single neural transform. Our DNN decoder predicts residuals without distortion feedback, which improves the video quality by accounting for occlusion/disocclusion and camera movements. We simultaneously train different bandwidth allocation networks for the frames to allow variable bandwidth transmission. Then, we train a bandwidth allocation network using reinforcement learning (RL) that optimizes the allocation of limited available channel bandwidth among video frames to maximize the overall visual quality. Our results show thatDeepWiVecan overcome thecliff-effect, which is prevalent in conventional separation-based digital communication schemes, and achieve graceful degradation with the mismatch between the estimated and actual channel qualities.DeepWiVeoutperforms H.264 video compression followed by low-density parity check (LDPC) codes in all channel conditions by up to 0.0485 in terms of the multi-scale structural similarity index measure (MS-SSIM), and H.265+ LDPC by up to 0.0069 on average. We also illustrate the importance of optimizing bandwidth allocation in JSCC video transmission by showing that our optimal bandwidth allocation policy is superior to uniform allocation as well as a heuristic policy benchmark.

We propose a novel formulation of the “effectiveness problem” in communications, put forth by Shannon and Weaver in their seminal work “The Mathematical Theory of Communication”, by considering multiple agents communicating over a noisy channel in order to achieve better coordination and cooperation in a multi-agent reinforcement learning (MARL) framework. Specifically, we consider a multi-agent partially observable Markov decision process (MA-POMDP), in which the agents, in addition to interacting with the environment, can also communicate with each other over a noisy communication channel. The noisy communication channel is considered explicitly as part of the dynamics of the environment, and the message each agent sends is part of the action that the agent can take. As a result, the agents learn not only to collaborate with each other but also to communicate “effectively” over a noisy channel. This framework generalizes both the traditional communication problem, where the main goal is to convey a message reliably over a noisy channel, and the “learning to communicate” framework that has received recent attention in the MARL literature, where the underlying communication channels are assumed to be error-free. We show via examples that the joint policy learned using the proposed framework is superior to that where the communication is considered separately from the underlying MA-POMDP. This is a very powerful framework, which has many real world applications, from autonomous vehicle planning to drone swarm control, and opens up the rich toolbox of deep reinforcement learning for the design of multi-user communication systems.

Precise synchronisation of transmitters and receivers is particularly challenging in diffusive molecular communication environments. To this end, a point-to-point molecular communication system is examined wherein the design of the transceiver offers resilience to synchronisation errors. In particular, the development of a sequential probability ratio test-based detector, which allows for additional observations in the presence of uncertainty due to mis-synchronisation at the receiver, and a modulation design which is optimised for this receiver strategy, is considered. The structure of the probability of molecules hitting a receiver within a particular time slot is exploited. An approximate maximum log-likelihood estimator for the synchronisation error is derived and the Cramér-Rao bound (CRB) computed, to show that the performance of the proposed estimator is close to the CRB at low transmission rates. The proposed receiver and modulation designs achieve strongly improved asynchronous detection performance for the same data rate as a decision feedback based receiver by a factor of 3 to 5 on average.