This paper presents a framework to navigate visually impaired people through unfamiliar environments by means of a mobile manipulator. The Human-Robot system consists of three key components: a mobile base, a robotic arm, and the human subject who gets guided by the robotic arm via physically coupling their hand with the cobot’s end-effector. These components, receiving a goal from the user, traverse a collision-free set of waypoints in a coordinated manner, while avoiding static and dynamic obstacles through an obstacle avoidance unit and a novel human guidance planner. With this aim, we also present a legs tracking algorithm that utilizes 2D LiDAR sensors integrated into the mobile base to monitor the human pose. Additionally, we introduce an adaptive pulling planner responsible for guiding the individual back to the intended path if they veer off course. This is achieved by establishing a target arm end-effector position and dynamically adjusting the impedance parameters in real-time through a impedance tuning unit. To validate the framework we present a set of experiments both in laboratory settings with 12 healthy blindfolded subjects and a proof-of-concept demonstration in a real-world scenario.

Preserving and encouraging mobility in the elderly and adults with chronic conditions is of paramount importance. However, existing walking aids are either inadequate to provide sufficient support to users’ stability or too bulky and poorly maneuverable to be used outside hospital environments. In addition, they all lack adaptability to individual requirements. To address these challenges, this paper introduces WANDER, a novel Walking Assistive omNi-Directional Exo-Robot. It consists of an omnidirectional platform and a robust aluminum structure mounted on top of it, which provides partial body weight support. A comfortable and minimally restrictive coupling interface embedded with a force/torque sensor allows to detect users’ intentions, which are translated into command velocities by means of a variable admittance controller. An optimization technique based on users’ preferences, i.e., Preference-Based Optimization (PBO) guides the choice of the admittance parameters (i.e., virtual mass and damping) to better fit subject-specific needs and characteristics. Experiments with twelve healthy subjects exhibited a significant decrease in energy consumption and jerk when using WANDER with PBO parameters as well as improved user performance and comfort. The great interpersonal variability in the optimized parameters highlights the importance of personalized control settings when walking with an assistive device, aiming to enhance users’ comfort and mobility while ensuring reliable physical support.

This paper presents a physical interface for collaborative mobile manipulators in industrial manufacturing and logistics applications. The proposed work builds on our earlier MOCA-MAN interface, through which an operator could be physically coupled to a mobile manipulator to be assisted in performing daily activities. The previous interface was based on a magnetic clamp attached to one arm of the user for the coupling stage, and a bracelet based on EMG sensors on the other arm for human-robot communication via gestures. The new interface instead presents the following additions: i) An industrial-like design that allows the worker to couple/decouple easily and to operate mobile manipulators locally; ii) A simplistic communication channel via a simple buttons board that allows controlling the robot with one hand only; iii) The interface offers enhanced loco-manipulation capabilities that do not compromise the worker mobility. In addition, an experimental evaluation with six human subjects is carried out to analyze the enhanced locomotion and flexibility of the proposed interface in terms of mobility constraint, usability, and physical load reduction.

The objective of this paper is to create a new collaborative robotic system that subsumes the advantages of mobile manipulators and supernumerary limbs. By exploiting the reconfiguration potential of a MObile Collaborative robot Assistant (MOCA), we create a collaborative robot that can function autonomously, in close proximity to humans, or be physically coupled to the human counterpart as a supernumerary body (MOCA-MAN). Through an admittance interface and a hand gesture recognition system, the controller can give higher priority to the mobile base (e.g., for long distance co-carrying tasks) or the arm movements (e.g., for manipulating tools), when performing conjoined actions. The resulting system has a high potential not only to reduce waste associated with the equipment waiting and setup times, but also to mitigate the human effort when performing heavy or prolonged manipulation tasks. The performance of the proposed system, i.e., MOCA-MAN, is evaluated by multiple subjects in two different use-case scenarios, which require large mobility or close-proximity manipulation.

In this work, we propose a novel visuo-haptic guidance interface to enable mobile collaborative robots to follow human instructions in a way understandable by non-experts. The interface is composed of a haptic admittance module and a human visual tracking module. The haptic guidance enables an individual to guide the robot end-effector in the workspace to reach and grasp arbitrary items. The visual interface, on the other hand, uses a real-time human tracking system and enables autonomous and continuous navigation of the mobile robot towards the human, with the ability to avoid static and dynamic obstacles along its path. To ensure a safer human-robot interaction, the visual tracking goal is set outside of a certain area around the human body, entering which will switch robot behaviour to the haptic mode. The execution of the two modes is achieved by two different controllers, the mobile base admittance controller for the haptic guidance and the robot's whole-body impedance controller, that enables physically coupled and controllable locomotion and manipulation. The proposed interface is validated experimentally, where a human-guided robot performs the loading and transportation of a heavy object in a cluttered workspace, illustrating the potential of the proposed Follow-Me interface in removing the external loading from the human body in this type of repetitive industrial tasks.

Nowadays, robots are expected to enter in various application scenarios and interact with unknown and dynamically changing environments. This highlights the need for creating autonomous robot behaviours to explore such environments, identify their characteristics and adapt, and build knowledge for future interactions. To respond to this need, in this paper we present a novel framework that integrates multiple components to achieve a context-aware and adaptive interaction between the robot and uncertain environments. The core of this framework is a novel self-tuning impedance controller that regulates robot quasi-static parameters, i.e., stiffness and damping, based on the robot sensory data and vision. The tuning of the parameters is achieved only in the direction(s) of interaction or movement, by distinguishing expected interactions from external disturbances. A vision module is developed to recognize the environmental characteristics and to associate them to the previously/newly identified interaction parameters, with the robot always being able to adapt to the new changes or unexpected situations. This enables a faster robot adaptability, starting from better initial interaction parameters. The framework is evaluated experimentally in an agricultural task, where the robot effectively interacts with various deformable environments.

In this paper, we propose a control framework for a multi-human and mobile-robot collaborative team, that takes into account the co-workers' ergonomic requirements as well as the demand for high flexibility in the manufacturing industries. The new MObile Collaborative robotic Assistant (MOCA), which is composed of a lightweight manipulator arm, an underactuated hand, and a mobile platform driven by four omni-directional wheels enabling mobility in the workspace, is able to accomplish multiple tasks in a wide area with a high level of adaptability. In addition, an ergonomics module to anticipate and mitigate the human risk factors by means of a multi-object optimisation is integrated into the framework to ensure human safety and improvement of working conditions. The main advantage of this approach is that MOCA can assist multiple human operators, reducing their physical risks, with fast-adaptive capacities due to agile mobility and advanced interaction and manipulation. We validated the proposed method with an experiment simulating a simple manufacturing line which involves two subjects and the MOCA. The results demonstrate that the proposed framework is able to address multi-workers' ergonomics with a high level of flexibility in the workplace.

Complex interactions with unstructured environments require the application of appropriate restoring forces in response to the imposed displacements. Impedance control techniques provide effective solutions to achieve this, however, their quasi-static performance is highly dependent on the choice of parameters, i.e. stiffness and damping. In most cases, such parameters are previously selected by robot programmers to achieve a desired response, which limits the adaptation capability of robots to varying task conditions. To improve the generality of interaction planning through task-dependent regulation of the parameters, this paper introduces a novel self-regulating impedance controller. The regulation of the parameters is achieved based on the robot's local sensory data, and on an interaction expectancy value. This value combines the interaction values from the robot state machine and visual feedback, to authorize the autonomous tuning of the impedance parameters in selective Cartesian axes. The effectiveness of the proposed method is validated experimentally in a debris removal task.