Legged robots have been highlighted as promising mobile platforms for disaster response and rescue scenarios because of their rough terrain locomotion capability. In cluttered environments, small robots are desirable as they can maneuver through small gaps, narrow paths, or tunnels. However small robots have their own set of difficulties such as limited space for sensors, limited obstacle clearance, and scaled-down walking speed. In this paper, we extensively address these difficulties via effective sensor integration and exploitation of dynamic locomotion and jumping. We integrate two Intel RealSense sensors into the MIT Mini-Cheetah, a 0.3 m tall, 9 kg quadruped robot. Simple and effective filtering and evaluation algorithms are used for foothold adjustment and obstacle avoidance. We showcase the exploration of highly irregular terrain using dynamic trotting and jumping with the small-scale, fully sensorized Mini-Cheetah quadruped robot.

Mini Cheetah is a small and inexpensive, yet powerful and mechanically robust quadruped robot, intended to enable rapid development of control systems for legged robots. The robot uses custom backdriveable modular actuators, which enable high-bandwidth force control, high force density, and robustness to impacts. Standing around 0.3 m tall and weighing 9 kg, Mini Cheetah can easily be handled by a single operator. We have demonstrated dynamic trot, trot-run, bounding, and pronking gaits on the robot to speeds of up to 2.45 meters per second using Convex Model-Predictive Control (cMPC). In addition to locomotion, we have used the robot to execute 360° backflips, with trajectories generated using offline nonlinear optimization.

This paper presents a novel methodology for implementing optimized jumping behavior on quadruped robots. Our method includes efficient trajectory optimization, precise high-frequency tracking controller and robust landing controller for stabilizing the robot body position and orientation after impact. Experimental validation was successfully conducted on the MIT Cheetah 3, enabling the robot to repeatably jump onto and jump down from a desk with the height of 30" (0.76 m). The result demonstrates the advantages of the approach as well as the capability of the robot hardware itself.

This paper introduces a new robust, dynamic quadruped, the MIT Cheetah 3. Like its predecessor, the Cheetah 3 exploits tailored mechanical design to enable simple control strategies for dynamic locomotion and features high-bandwidth proprioceptive actuators to manage physical interaction with the environment. A new leg design is presented that includes proprioceptive actuation on the abduction/adduction degrees of freedom in addition to an expanded range of motion on the hips and knees. To make full use of these new capabilities, general balance and locomotion controllers for Cheetah 3 are presented. These controllers are embedded into a modular control architecture that allows the robot to handle unexpected terrain disturbances through reactive gait modification and without the need for external sensors or prior environment knowledge. The efficiency of the robot is demonstrated by a low Cost of Transport (CoT) over multiple gaits at moderate speeds, with the lowest CoT of 0.45 found during trotting. Experiments showcase the ability to blindly climb up stairs as a result of the full system integration. These results collectively represent a promising step toward a platform capable of generalized dynamic legged locomotion.

This paper presents an implementation of model predictive control (MPC) to determine ground reaction forces for a torque-controlled quadruped robot. The robot dynamics are simplified to formulate the problem as convex optimization while still capturing the full 3D nature of the system. With the simplified model, ground reaction force planning problems are formulated for prediction horizons of up to 0.5 seconds, and are solved to optimality in under 1 ms at a rate of 20-30 Hz. Despite using a simplified model, the robot is capable of robust locomotion at a variety of speeds. Experimental results demonstrate control of gaits including stand, trot, flying-trot, pronk, bound, pace, a 3-legged gait, and a full 3D gallop. The robot achieved forward speeds of up to 3 m/s, lateral speeds up to 1 m/s, and angular speeds up to 180 deg/sec. Our approach is general enough to perform all these behaviors with the same set of gains and weights.