Digital cameras consume$\sim 0.1$microjoule per pixel to capture and encode video, resulting in a power usage of$\sim 20$W for a 4K sensor operating at 30 fps. Imagining gigapixel cameras operating at 100-1000 fps, the current processing model is unsustainable. To address this, physical layer compressive measurement has been proposed to reduce power consumption per pixel by 10-100×. Video Snapshot Compressive Imaging (SCI) introduces high frequency modulation in the optical sensor layer to increase effective frame rate. A commonly used sampling strategy of video SCI is Random Sampling (RS) where each mask element value is randomly set to be 0 or 1. Similarly, image inpainting (I2P) has demonstrated that images can be recovered from a fraction of the image pixels. Inspired by I2P, we propose Ultra-Sparse Sampling (USS) regime, where at each spatial location, only one sub-frame is set to 1 and all others are set to 0. We then build a Digital Micro-mirror Device (DMD) encoding system to verify the effectiveness of our USS strategy. Ideally, we can decompose the USS measurement into sub-measurements for which we can utilize I2P algorithms to recover high-speed frames. However, due to the mismatch between the DMD and CCD, the USS measurement cannot be perfectly decomposed. To this end, we proposeBSTFormer, a sparse TransFormer that utilizes local Block attention, global Sparse attention, and global Temporal attention to exploit the sparsity of the USS measurement. Extensive results on both simulated and real-world data show that our method significantly outperforms all previous state-of-the-art algorithms. Additionally, an essential advantage of the USS strategy is its higher dynamic range than that of the RS strategy. Finally, from the application perspective, the USS strategy is a good choice to implement a complete video SCI system on chip due to its fixed exposure time. Code is available athttps://github.com/mcao92/BSTFormer.

In coded aperture snapshot spectral imaging (CASSI), the captured measurement entangles spatial and spectral information, posing a severely ill-posed inverse problem for hyperspectral images (HSIs) reconstruction. Moreover, the captured radiance inherently depends on scene illumination, making it difficult to recover the intrinsic spectral reflectance that remains invariant to lighting conditions. To address these challenges, we propose a chromaticity-intensity decomposition framework, which disentangles an HSI into a spatially smooth intensity map and a spectrally variant chromaticity cube. The chromaticity encodes lighting-invariant reflectance, enriched with high-frequency spatial details and local spectral sparsity. Building on this decomposition, we develop CIDNet—a Chromaticity-Intensity Decomposition unfolding network within a dual-camera CASSI system. CIDNet integrates a hybrid spatial-spectral Transformer tailored to reconstruct fine-grained and sparse spectral chromaticity and a degradation-aware, spatially-adaptive noise estimation module that captures anisotropic noise across iterative stages. Extensive experiments on both synthetic and real-world CASSI datasets demonstrate that our method achieves superior performance in both spectral and chromaticity fidelity. Code is released at: \url{https://github.com/xiaodongwo/CIDNet}.

Hyperspectral image (HSI) reconstruction from coded measurement is significant for acquiring images with higher spectral resolution than traditional RGB images. Current advanced neural networks have already shown impressive performance in some datasets like CAVE and KAIST. However, these networks rely on a large amount of simulated ground truth, measurement pairs. Unfortunately, in some scenarios, it is hard to obtain a sufficient high-quality HSI training set, resulting in low generalization ability. Although iterative algorithms show good generalization ability, they are limited by slow speed and low reconstruction quality. To address this challenge, in this paper, we propose a self-supervised learning framework, which can train and fine-tune networks using measurements without ground truth. Besides, we propose the spectral low-rank loss function that enables networks to learn the signal model of HSI. Finally, we train and fine-tune a representative deep unfolding network, GAP-net, using our proposed framework. Extensive simulation and real data results show that the proposed self-supervised framework is capable of achieving results competitive with those of supervised networks. Code is available at https://github.com/zjhe02/CASSI-SSL.

We study the inverse problem of Coded Aperture Snapshot Spectral Imaging (CASSI), which captures a spatial-spectral data cube using snapshot 2D measurements and uses algorithms to reconstruct 3D hyperspectral images (HSI). However, current methods based on Convolutional Neural Networks (CNNs) struggle to capture long-range dependencies and non-local similarities. The recently popular Transformerbased methods are poorly deployed on downstream tasks due to the high computational cost caused by self-attention. In this paper, we propose Coarse-Fine Spectral-Aware Deformable Convolution Network (CFSDCN), applying deformable convolutional networks (DCN) to this task for the first time. Considering the sparsity of HSI, we design a deformable convolution module that exploits its deformability to capture long-range dependencies and non-local similarities. In addition, we propose a new spectral information interaction module that considers both coarse-grained and fine-grained spectral similarities. Extensive experiments demonstrate that our CFSDCN significantly outperforms previous state-of-the-art (SOTA) methods on both simulated and real HSI datasets.

Video snapshot compressive imaging (SCI) uses a twodimensional detector to capture consecutive video frames during a single exposure time. Following this, an efficient reconstruction algorithm needs to be designed to reconstruct the desired video frames. Although recent deep learning-based state-of-the-art (SOTA) reconstruction algorithms have achieved good results in most tasks, they still face the following challenges due to excessive model complexity and GPU memory limitations: 1) these models need high computational cost, and 2) they are usually unable to reconstruct large-scale video frames at high compression ratios. To address these issues, we develop an efficient network for video SCI by using dense connections and space-time factorization mechanism within a single residual block, dubbed EfficientSCI. The EfficientSCI network can well establish spatial-temporal correlation by using convolution in the spatial domain and Transformer in the temporal domain, respectively. We are the first time to show that an UHD color video with high compression ratio can be reconstructed from a snapshot 2D measurement using a single end-to-end deep learning model with PSNR above 32 dB. Extensive results on both simulation and real data show that our method significantly outperforms all previous SOTA algorithms with better real-time performance. The code is at https://github.com/ucaswangls/EfficientSCI.git.

Video snapshot compressive imaging (SCI) aims to capture a sequence of video frames with only a single shot of a 2D detector, whose backbones rest in optical modulation patterns (also known as masks) and a computational reconstruction algorithm. Advanced deep learning algorithms and mature hardware are putting video SCI into practical applications. Yet, there are two clouds in the sunshine of SCI: i) low dynamic range as a victim of high temporal multiplexing, and ii) existing deep learning algorithms’ degradation on real system. To address these challenges, this paper presents a deep optics framework to jointly optimize masks and a reconstruction network. Specifically, we first propose a new type of structural mask to realize motionaware and full-dynamic-range measurement. Considering the motion awareness property in measurement domain, we develop an efficient network for video SCI reconstruction using Transformer to capture long-term temporal dependencies, dubbed Res2former. Moreover, sensor response is introduced into the forward model of video SCI to guarantee end-to-end model training close to real system. Finally, we implement the learned structural masks on a digital micro-mirror device. Experimental results on synthetic and real data validate the effectiveness of the proposed frame-work. We believe this is a milestone for real-world video SCI. The source code and data are available at https://github.com/pwangcs/DeepOpticsSCI.

Benefiting from the promising performance of CNNs models for high-level vision tasks, these networks have been extensively adopted to image enhancement tasks. However, recent methods have complex architecture resulting in poor generalization and high computational cost. Their activation functions are originally designed for other vision tasks. In this work, we present a lightweight network to learn periodic features (LPF) using the proposed wave presentation. Specifically, to better capture implicit feature representations, we represent features as signals with three parts: Cosine Wave Map (CWM), Sine Wave Map (SWM) and Direct Current Map (DCM). Thus, we formulate the image enhancement task as a signal modulation problem. Inspired by the Fourier transform, we build the Fourier Enhancement Module (FEM) that allows for efficient and scalable spatial mixing of local and non-local contents and dynamically learns the interaction between waves to enhance the images. LPF with only 80k parameters achieves better quantitative and qualitative results compared with SOTA methods on four image enhancement datasets. The source code and pretrained model are available at https://github.com/DeniJsonC/LPF.

Video snapshot compressive imaging (SCI) captures multiple sequential video frames by a single measurement using the idea of computational imaging. The underlying principle is to modulate high-speed frames through different masks and these modulated frames are summed to a single measurement captured by a low-speed 2D sensor (dubbed optical encoder); following this, algorithms are employed to reconstruct the desired high-speed frames (dubbed software decoder) if needed. In this article, we consider the reconstruction algorithm in video SCI, i.e., recovering a series of video frames from a compressed measurement. Specifically, we propose a Spatial-Temporal transFormer (STFormer) to exploit the correlation in both spatial and temporal domains. STFormer network is composed of a token generation block, a video reconstruction block, and these two blocks are connected by a series of STFormer blocks. Each STFormer block consists of a spatial self-attention branch, a temporal self-attention branch and the outputs of these two branches are integrated by a fusion network. Extensive results on both simulated and real data demonstrate the state-of-the-art performance of STFormer. The code and models are publicly available at https://github.com/ucaswangls/STFormer.