Applications of rolling diaphragm transmissions for medical and teleoperated robotics are of great interest, due to the low friction of rolling diaphragms combined with the power density and stiffness of hydraulic transmissions. However, the stiffness-enabling pressure preloads can form a tradeoff against bearing loading in some rolling diaphragm layouts, and transmission setup can be difficult. Utilization of cable drives compliment the rolling diaphragm transmission's advantages, but maintaining cable tension is crucial for optimal and consistent performance. In this paper, a coaxial opposed rolling diaphragm layout with cable drive and an electronic transmission control system are investigated, with a focus on system reliability and scalability. Mechanical features are proposed which enable force balancing, decoupling of transmission pressure from bearing loads, and maintenance of cable tension. Key considerations and procedures for automation of transmission setup, phasing, and operation are also presented. We also present an analysis of system stiffness to identify key compliance contributors, and conduct experiments to validate prototype design performance.

Robots “in-the-wild” encounter and must traverse widely varying terrain, ranging from solid ground to granular materials like sand to full liquids. Numerous approaches exist, including wheeled and legged robots, each excelling in specific domains. Screw-based locomotion is a promising approach for multi-domain mobility, leveraged in exploratory robotic designs, including amphibious vehicles and snake robotics. However, unlike other forms of locomotion, there is limited exploration of the models, parameter effects, and efficiency for multi-terrain Archimedes screw locomotion. In this work, we present work towards this missing component in understanding screw-based locomotion: comprehensive experimental results and performance analysis across different media. We designed a mobile test bed for indoor and outdoor experimentation to collect this data. Beyond quantitatively showing the multi-domain mobility of screw-based locomotion, we envision future researchers and engineers using the presented results to design effective screw-based locomotion systems.

Physicians perform minimally invasive percuta-neous procedures under Computed Tomography (CT) image guidance both for the diagnosis and treatment of numerous diseases. For these procedures performed within Computed Tomography Scanners, robots can enable physicians to more accurately target sub-dermal lesions while increasing safety. However, existing robots for this application have limited dexterity, workspace, or accuracy. This paper describes the design, manufacture, and performance of a highly dexterous, low-profile, 8+2 Degree-of-Freedom (DoF) robotic arm for CT guided percutaneous needle biopsy. In this article, we propose CRANE: CT Robot and Needle Emplacer. The design focuses on system dexterity with high accuracy: extending physicians' ability to manipulate and insert needles within the scanner bore while providing the high accuracy possible with a robot. We also propose and validate a system architecture and control scheme for low profile and highly accurate image-guided robotics, that meets the clinical requirements for target accuracy during an in-situ evaluation. The accuracy is additionally evaluated through a trajectory tracking evaluation resulting in$< \boldsymbol{0.2}\mathbf{mm}$and$<\boldsymbol{ 0.71}^{\circ}$tracking error. Finally, we present a novel needle driving and grasping mechanism with controlling electronics that provides simple manufacturing, sterilization, and adaptability to accom-modate different sizes and types of needles.

This paper presents the design and performance of a new locomotion strategy for serpentine robots using screw propulsion. The ARCSnake robot comprises serially linked, identical modules, each incorporating an Archimedes' screw for propulsion and a universal joint (U-Joint) for orientation control. When serially chained, these modules form a versatile serpentine robot platform which enables the robot to reshape its body configuration for varying environments, typical of a snake. Furthermore, the Archimedes' screws allow for novel omni-wheel drive-like motions by speed controlling their screw threads. This paper considers the mechanical and electrical design, as well as the software architecture for realizing a fully integrated system. The system includes 3N actuators for N segments, each controlled using a BeagleBone Black with a customized power-electronics cape, a 9 Degrees of Freedom (DoF) Inertial Measurement Unit (IMU), and a scalable communication channel over ROS. This robot serves as the first proof-of-concept demonstration of the NASA-JPL Exobiology Extant Life Surveyor (EELS) program that aims to deliver scientific instrumentation deep within the plume vents, caves, and ice sheets of Enceladus and Europa in search for extant lifeforms*.

This paper describes the design, manufacture, and performance of a highly dexterous, low-profile, 7 Degree-of-Freedom (DoF) robotic arm for CT-guided percutaneous needle biopsy. Direct CT guidance allows physicians to localize tumours quickly; however, needle insertion is still performed by hand. This system is mounted to a fully active motion stage superior to the patient's head and teleoperated by a radiologist. Unlike other similar robots, this robot's fully serial-link approach uses a unique combination of belt and cable drives for high-transparency and minimal-backlash, allowing for an expansive working area and numerous approach angles to targets, all while maintaining a small in-bore cross-section of less than 16cm2. Simulations verified the system's expansive collision free work-space and ability to hit targets across the entire chest, as required for lung cancer biopsy. Targeting error was on average <; 1mm on a teleoperated accuracy task, illustrating the system's sufficient accuracy to perform biopsy procedures. While this system was developed for lung biopsies, it can be easily modified for other CT-guided needle based procedures. Additionally, this system is open-hardware.