Deep learning models are known to suffer from the problem of bias, and researchers have been exploring methods to address this issue. However, most of these methods require prior knowledge of the bias and are not always practical. In this paper, we focus on a more practical setting with no prior information about the bias. Generally, in this setting, there are a large number of bias-aligned samples that cause the model to produce biased predictions and a few bias-conflicting samples that do not conform to the bias. If the training data is limited, the influence of the bias-aligned samples may become even stronger on the model predictions, and we experimentally demonstrate that existing debiasing techniques suffer severely in such cases. In this paper, we examine the effects of unknown bias in small dataset regimes and present a novel approach to mitigate this issue. The proposed approach directly addresses the issue of the extremely low occurrence of bias-conflicting samples in limited data settings through the synthesis of hybrid samples that can be used to reduce the effect of bias. We perform extensive experiments on several benchmark datasets and experimentally demonstrate the effectiveness of our proposed approach in addressing any unknown bias in the presence of limited data. Specifically, our approach outperforms the vanilla, LfF, LDD, and DebiAN debiasing methods by absolute margins of 10.39%, 9.08%, 8.07%, and 9.67% when only 10% of the Corrupted CIFAR-10 Type 1 dataset is available with a bias-conflicting sample ratio of 0.05.

In the task incremental learning problem, deep learning models suffer from catastrophic forgetting of previously seen classes/tasks as they are trained on new classes/tasks. This problem becomes even harder when some of the test classes do not belong to the training class set, i.e., the task incremental generalized zero-shot learning problem. We propose a novel approach to address the task incremental learning problem for both the non zero-shot and zero-shot settings. Our proposed approach, called Rectification-based Knowledge Retention (RKR), applies weight rectifications and affine transformations for adapting the model to any task. During testing, our approach can use the task label information (task-aware) to quickly adapt the network to that task. We also extend our approach to make it task-agnostic so that it can work even when the task label information is not available during testing. Specifically, given a continuum of test data, our approach predicts the task and quickly adapts the network to the predicted task. We experimentally show that our proposed approach achieves state-of-the-art results on several benchmark datasets for both non zero-shot and zero-shot task incremental learning.

Deep learning models generally learn the biases present in the training data. Researchers have proposed several approaches to mitigate such biases and make the model fair. Bias mitigation techniques assume that a sufficiently large number of training examples are present. However, we observe that if the training data is limited, then the effectiveness of bias mitigation methods is severely degraded. In this paper, we propose a novel approach to address this problem. Specifically, we adapt self-supervision and self-distillation to reduce the impact of biases on the model in this setting. Self-supervision and self-distillation are not used for bias mitigation. However, through this work, we demonstrate for the first time that these techniques are very effective in bias mitigation. We empirically show that our approach can significantly reduce the biases learned by the model. Further, we experimentally demonstrate that our approach is complementary to other bias mitigation strategies. Our approach significantly improves their performance and further reduces the model biases in the limited data regime. Specifically, on the L-CIFAR-10S skewed dataset, our approach significantly reduces the bias score of the baseline model by 78.22% and outperforms it in terms of accuracy by a significant absolute margin of 8.89%. It also significantly reduces the bias score for the state-of-the-art domain independent bias mitigation method by 59.26% and improves its performance by a significant absolute margin of 7.08%.

Many real-world classification problems often have classes with very few labeled training samples. Moreover, all possible classes may not be initially available for training, and may be given incrementally. Deep learning models need to deal with this two-fold problem in order to perform well in real-life situations. In this paper, we propose a novel Few-Shot Lifelong Learning (FSLL) method that enables deep learning models to perform lifelong/continual learning on few-shot data. Our method selects very few parameters from the model for training every new set of classes instead of training the full model. This helps in preventing overfitting. We choose the few parameters from the model in such a way that only the currently unimportant parameters get selected. By keeping the important parameters in the model intact, our approach minimizes catastrophic forgetting. Furthermore, we minimize the cosine similarity between the new and the old class prototypes in order to maximize their separation, thereby improving the classification performance. We also show that integrating our method with self-supervision improves the model performance significantly. We experimentally show that our method significantly outperforms existing methods on the miniImageNet, CIFAR-100, and CUB-200 datasets. Specifically, we outperform the state-of-the-art method by an absolute margin of 19.27% for the CUB dataset.

Deep learning models suffer from catastrophic forgetting when trained in an incremental learning setting. In this work, we propose a novel approach to address the task incremental learning problem, which involves training a model on new tasks that arrive in an incremental manner. The task incremental learning problem becomes even more challenging when the test set contains classes that are not part of the train set, i.e., a task incremental generalized zero-shot learning problem. Our approach can be used in both the zero-shot and non zero-shot task incremental learning settings. Our proposed method uses weight rectifications and affine transformations in order to adapt the model to different tasks that arrive sequentially. Specifically, we adapt the network weights to work for new tasks by "rectifying" the weights learned from the previous task. We learn these weight rectifications using very few parameters. We additionally learn affine transformations on the outputs generated by the network in order to better adapt them for the new task. We perform experiments on several datasets in both zero-shot and non zero-shot task incremental learning settings and empirically show that our approach achieves state-of-the-art results. Specifically, our approach outperforms the state-of-the-art non zero-shot task incremental learning method by over 5% on the CIFAR-100 dataset. Our approach also significantly outperforms the state-of-the-art task incremental generalized zero-shot learning method by absolute margins of 6.91% and 6.33% for the AWA1 and CUB datasets, respectively. We validate our approach using various ablation studies.

In this paper, we propose an approach to improve few-shot classification performance using a composite rotation based auxiliary task. Few-shot classification methods aim to produce neural networks that perform well for classes with a large number of training samples and classes with less number of training samples. They employ techniques to enable the network to produce highly discriminative features that are also very generic. Generally, the better the quality and generic-nature of the features produced by the network, the better is the performance of the network on few-shot learning. Our approach aims to train networks to produce such features by using a self-supervised auxiliary task. Our proposed composite rotation based auxiliary task performs rotation at two levels, i.e., rotation of patches inside the image (inner rotation) and rotation of the whole image (outer rotation) and assigns one out of 16 rotation classes to the modified image. We then simultaneously train for the composite rotation prediction task along with the original classification task, which forces the network to learn high-quality generic features that help improve the few-shot classification performance. We experimentally show that our approach performs better than existing few-shot learning methods on multiple benchmark datasets.

Learning from a few examples is an important practical aspect of training classifiers. Various works have examined this aspect quite well. However, all existing approaches assume that the few examples provided are always correctly labeled. This is a strong assumption, especially if one considers the current techniques for labeling using crowd-based labeling services. We address this issue by proposing a novel robust few-shot learning approach. Our method relies on generating robust prototypes from a set of few examples. Specifically, our method refines the class prototypes by producing hybrid features from the support examples of each class. The refined prototypes help to classify the query images better. Our method can replace the evaluation phase of any few-shot learning method that uses a nearest neighbor prototype-based evaluation procedure to make them robust. We evaluate our method on standard mini-ImageNet and tiered-ImageNet datasets. We perform experiments with various label corruption rates in the support examples of the few-shot classes. We obtain significant improvement over widely used few-shot learning methods that suffer significant performance degeneration in the presence of label noise. We finally provide extensive ablation experiments to validate our method.

In this paper, we propose a novel approach for generalized zero-shot learning in a multi-modal setting, where we have novel classes ofaudio/video during testing that are not seen during training. We use the semantic relatedness oftext embeddings as a means for zero-shot learning by aligning audio and video embeddings with the corresponding class label text feature space. Our approach uses a cross-modal decoder and a composite triplet loss. The cross-modal decoder enforces a constraint that the class label text features can be reconstructed from the audio and video embeddings of data points. This helps the audio and video embeddings to move closer to the class label text embedding. The composite triplet loss makes use of the audio, video, and text embeddings. It helps bring the embeddings from the same class closer and push away the embeddings from different classes in a multi-modal setting. This helps the network to perform better on the multi-modal zero-shot learning task. Importantly, our multi-modal zero-shot learning approach works even if a modality is missing at test time. We test our approach on the generalized zero-shot classification and retrieval tasks and show that our approach outperforms other models in the presence of a single modality as well as in the presence of multiple modalities. We validate our approach by comparing it with previous approaches and using various ablations.

Convolutional layers are a major driving force behind the successes of deep learning. Pointwise convolution (PWC) is a 1 × 1 convolutional filter that is primarily used for parameter reduction. However, the PWC ignores the spatial information around the points it is processing. This design is by choice, in order to reduce the overall parameters and computations. However, we hypothesize that this shortcoming of PWC has a significant impact on the network performance. We propose an alternative design for pointwise convolution, which uses spatial information from the input efficiently. Our design significantly improves the performance of the networks without substantially increasing the number of parameters and computations. We experimentally show that our design results in significant improvement in the performance of the network for classification as well as detection.

This work presents a novel training technique for deep neural networks that makes use of additional data from a distribution that is different from that of the original input data. This technique aims to reduce overfitting and improve the generalization performance of the network. Our proposed technique, namely Passive Batch Injection Training Technique (PBITT), even reduces the level of overfitting in networks that already use the standard techniques for reducing overfitting such as L2regularization and batch normalization, resulting in significant accuracy improvements. Passive Batch Injection Training Technique (PBITT) introduces a few passive mini-batches into the training process that contain data from a distribution that is different from the input data distribution. This technique does not increase the number of parameters in the final model and also does not increase the inference (test) time but still improves the performance of deep CNNs. To the best of our knowledge, this is the first work that makes use of different data distribution to aid the training of convolutional neural networks (CNNs). We thoroughly evaluate the proposed approach on standard architectures: VGG, ResNet, and WideResNet, and on several popular datasets: CIFAR-10, CIFAR-100, SVHN, and ImageNet. We observe consistent accuracy improvement by using the proposed technique. We also show experimentally that the model trained by our technique generalizes well to other tasks such as object detection on the MS-COCO dataset using Faster R-CNN. We present extensive ablations to validate the proposed approach. Our approach improves the accuracy of VGG-16 by a significant margin of 2.1% over the CIFAR-100 dataset.

We present an approach for lifelong/continual learning of convolutional neural networks (CNN) that does not suffer from the problem of catastrophic forgetting when moving from one task to the other. We show that the activation maps generated by the CNN trained on the old task can be calibrated using very few calibration parameters, to become relevant to the new task. Based on this, we calibrate the activation maps produced by each network layer using spatial and channel-wise calibration modules and train only these calibration parameters for each new task in order to perform lifelong learning. Our calibration modules introduce significantly less computation and parameters as compared to the approaches that dynamically expand the network. Our approach is immune to catastrophic forgetting since we store the task-adaptive calibration parameters, which contain all the task-specific knowledge and is exclusive to each task. Further, our approach does not require storing data samples from the old tasks, which is done by many replay based methods. We perform extensive experiments on multiple benchmark datasets (SVHN, CIFAR, ImageNet, and MS-Celeb), all of which show substantial improvements over state-of-the-art methods (e.g., a 29% absolute increase in accuracy on CIFAR-100 with 10 classes at a time). On large-scale datasets, our approach yields 23.8% and 9.7% absolute increase in accuracy on ImageNet-100 and MS-Celeb-10K datasets, respectively, by employing very few (0.51% and 0.35% of model parameters) task-adaptive calibration parameters.

Convolution Neural Networks (CNN) have been extremely successful in solving intensive computer vision tasks. The convolutional filters used in CNNs have played a major role in this success, by extracting useful features from the inputs. Recently researchers have tried to boost the performance of CNNs by re-calibrating the feature maps produced by these filters, e.g., Squeeze-and-Excitation Networks (SENets). These approaches have achieved better performance by Exciting up the important channels or feature maps while diminishing the rest. However, in the process, architectural complexity has increased. We propose an architectural block that introduces much lower complexity than the existing methods of CNN performance boosting while performing significantly better than them. We carry out experiments on the CIFAR, ImageNet and MS-COCO datasets, and show that the proposed block can challenge the state-of-the-art results. Our method boosts the ResNet-50 architecture to perform comparably to the ResNet-152 architecture, which is a three times deeper network, on classification. We also show experimentally that our method is not limited to classification but also generalizes well to other tasks such as object detection.