In this paper we present an optically powered and motorized video camera system. Energy for the camera sensor is supplied by a glass fiber carrying 800 mW of optical power, which the sensor converts back to 320 mW of electrical power. The specific advantage of this arrangement is galvanic isolation and a very high robustness with respect to electromagnetic interference. We demonstrate that sufficient energy can be transmitted for driving an Actel Igloo FPGA, which performs the necessary signal processing. Additionally, with the help of capacitive energy storage, some small actuators can be supplied which move the camera sensor head. The base station of the system, based on a Xilinx Virtex-5 FPGA, holds a LEON-3 based system-on-chip encoding the incoming VGA video stream into Motion-JPEG formatted data in realtime, which may be directly sent to the internet using an Ethernet interface. The prototype has numerous fields of application where it performs much better than stateof-the-art solutions. Most prominent examples are visual sensors in high voltage areas as well as medical endoscopes.

A cost-effective route to build electrically as well as optically controlled modulators in silicon photonics is reviewed. The technology enables modulation at bit rates beyond 100 Gbit/s. This platform relies on the well-established silicon-based complementary metal-oxide-semiconductor processing technology for fabricating silicon-on-insulator (SOI) waveguides, while an organic cladding layer adds the required nonlinearity. The strength of this hybrid technology is discussed, and two key devices in communications are exemplarily regarded in more detail. The first device demonstrates demultiplexing of a 120 Gbit/s signal by means of four-wave mixing in a slot-waveguide that has been filled with a highly nonlinear chi(3)-organic material. The second device is a 100 Gbit/s/1 V electrooptic modulator based on a slow-light SOI photonic crystal covered with a chi(2)-nonlinear organic material.