Co-optimizing placement with congestion is integral to achieving high-quality designs. This paper presents GOALPlace, a learning-based approach to improving placement congestion by controlling cell density. It efficiently learns from an EDA tool's post-route optimized results and uses an empirical Bayes technique to adapt the target to a specific placer's solutions, effectively beginning with the end in mind. Our method enhances correlation with the tool's router and timing-opt engine, while solving placement globally without expensive incremental congestion estimation and mitigation methods. A statistical analysis with hierarchical netlist clustering establishes the importance of density and the potential for an adequate cell density target across placements. Our experiments show that our method, when integrated into an academic GPU-accelerated global placer, consistently produces macro and standard cell placements that match or exceed the quality of commercial tools. Our empirical Bayes methodology also shows a substantial quality improvement over leading academic mixed-size placers, achieving up to 10× fewer design rule check (DRC) violations, a 5% decrease in wirelength, and a 30% and 60% reduction in worst and total negative slack (WNS/TNS).

On-Chip Variation (OCV)-aware and Path-Based Analysis (PBA) accurate timing optimization achieved by gate sizing (including Vth-assignment) remains a pivotal step in modern signoff. However, in advanced nodes (e.g., 3nm), commercial tools often yield suboptimal results due to the intricate design demands and the vast choices of library cells that require substantial runtime and computational resources for exploration. To address these challenges, we introduce LEGO-Size, a generative framework that harnesses the power of Large Language Models (LLMs) and GPU-accelerated differentiable techniques for efficient gate sizing. LEGO-Size introduces three key innovations. First, it considers timing paths as sequences of tokenized library cells, casting gate sizing prediction as a language modeling task and solving it with self-supervised learning and supervised fine-tuning. Second, it employs a Graph Transformer (GT) with a linear-complexity attention mechanism for netlist encoding, enabling LLMs to make sizing decisions from a global perspective. Third, it integrates a differentiable Static Timing Analysis (STA) engine to refine LLM-predicted gate size probabilities by directly optimizing Total Negative Slack (TNS) through gradient descent. Experimental results on 5 unseen million-gate industrial designs in a commercial 3nm node show that LEGO-Size achieves up to 125x speed up with 37% TNS improvement over an industry-leading commercial signoff tool with minimal power and area overhead.

Logic gate sizing plays a vital role in timing optimization, especially as Moore's Law slows, shifting greater responsibility to EDA tools to enhance power, performance, and area (PPA), as these gains are no longer achieved solely through scaling and process advancements. There is an increasing need to push the limits of logic gate sizing to extract every possible improvement in PPA. With recent breakthroughs in machine learning (ML) and the computational power of GPUs, there is significant potential to elevate logic gate sizing algorithms to new heights. This contest aims to advance logic gate sizing and push the boundaries of PPA improvement through innovative EDA tools that leverage machine learning and GPU acceleration. As part of the contest, an infrastructure has been developed to enable ML and GPU-accelerated logic gate sizing algorithms, including the release of benchmarks in both standard EDA and ML-friendly formats, along with examples of incorporating "ML inside" EDA tools through Python APIs. The contest leverages the open-source EDA tool OpenROAD and ML-friendly data representation format, CircuitOps, to lower barriers to entry by providing accessible formats and tools, allowing participants to build on existing software without redundancy. With over 25 teams actively participating, the contest highlights growing interest and potential to push the boundaries of timing optimization.

An innovative ML infrastructure named CircuitOps is developed to streamline dataset generation and model inference for various generative AI (GAI)-based circuit optimization tasks. Addressing the challenges of the absence of a shared Intermediate Representation (IR), steep EDA learning curves, and AI-unfriendly data structures, we propose solutions that empower efficient data handling. Our contributions encompass the following: (1) labeled property graphs (LPGs) as IR for flexible netlist representation and efficient parallel processing; (2) tools-agnostic IR generation from standard EDA files; (3) customizable dataset generation facilitated through AI-friendly LPGs; (4) gRPC-based inference deployment. Compared with using Tcl interfaces of EDA design tools, CircuitOps achieves a significant 99× dataset generation speedup and 75K nets per second transfer throughput, validating its effectiveness in optimizing GAI tasks.

Macro placement is a critical very large-scale integration (VLSI) physical design problem that significantly impacts the design power-performance-area (PPA) metrics. This paper proposes AutoDMP, a methodology that leverages DREAMPlace, a GPU-accelerated placer, to place macros and standard cells concurrently in conjunction with automated parameter tuning using a multi-objective hyperparameter optimization technique. As a result, we can generate high-quality predictable solutions, improving the macro placement quality of academic benchmarks compared to baseline results generated from academic and commercial tools. AutoDMP is also computationally efficient, optimizing a design with 2.7 million cells and 320 macros in 3 hours on a single NVIDIA DGX Station A100. This work demonstrates the promise and potential of combining GPU-accelerated algorithms and ML techniques for VLSI design automation.

Self-supervised learning has shown great promise in leveraging large amounts of unlabeled data to achieve higher accuracy than supervised learning methods in many domains. Generative self-supervised learning can generate new data based on the trained data distribution. In this paper, we evaluate the effectiveness of generative self-supervised learning on combinational gate sizing in VLSI designs. We propose a novel use of Transformers for gate sizing when trained on a large dataset generate from a commercial EDA tool. We demonstrate that our trained model can achieve 93% accuracy, 1440X speedup and fast design convergence when compared to a leading commercial EDA tool.

Gate sizing is a fundamental netlist optimization move and researchers have used supervised learning-based models in gate sizers. Recently, Reinforcement Learning (RL) has been tried for sizing gates (and other EDA optimization problems) but are very runtime-intensive. In this work, we explore a novel Transformer-based gate sizer, TransSizer, to directly generate optimized gate sizes given a placed and unoptimized netlist. TransSizer is trained on datasets obtained from real tapeout-quality industrial designs in a foundry 5nm technology node. Our results indicate that TransSizer achieves 97% accuracy in predicting optimized gate sizes at the postroute optimization stage. Furthermore, TransSizer has a speedup of ~1400× while delivering similar timing, power and area metrics when compared to a leading-edge commercial tool for sizing-only optimization.

We describe the planned Alpha release of OpenROAD, an open-source end-to-end silicon compiler. OpenROAD will help realize the goal of "democratization of hardware design", by reducing cost, expertise, schedule and risk barriers that confront system designers today. The development of open-source, self-driving design tools is in and of itself a "moon shot" with numerous technical and cultural challenges. The open-source flow incorporates a compatible open-source set of tools that span logic synthesis, floorplanning, placement, clock tree synthesis, global routing and detailed routing. The flow also incorporates analysis and support tools for static timing analysis, parasitic extraction, power integrity analysis, and cloud deployment. We also note several observed challenges, or "lessons learned", with respect to development of open-source EDA tools and flows.