Rotating miniature magnetic swimmers are de-vices that could navigate within the bloodstream to access remote locations of the body and perform minimally invasive procedures. The rotational movement could be used, for example, to abrade a pulmonary embolus. Some regions, such as the heart, are challenging to navigate. Cardiac and respiratory motions of the heart combined with a fast and variable blood flow necessitate a highly agile swimmer. This swimmer should minimize contact with the walls of the blood vessels and the cardiac structures to mitigate the risk of complications. This paper presents experimental tests of a millimeter-scale magnetic helical swimmer navigating in a blood-mimicking solution and describes its turning capabilities. The step-out frequency and the position error were measured for different values of turn radius. The paper also introduces rapid movements that increase the swimmer's agility and demonstrates these experimentally on a complex 3D trajectory.

This article presents a miniature magnetic swimmer and a control apparatus able to perform both 3-D path following and blood clot removal. The robots are 2.5 mm in diameter, 6 mm in length, contain an internal permanent magnet, and have cutting tips coated in diamond powder. The robots are magnetically propelled by an external magnetic system using three coil pairs arranged orthogonally. A range of robot tip designs were tested for abrading human blood clots in vitro. The best design removed a blood clot at a maximum rate of 20.13 mm3/min. A controller for 3-D navigation is presented and tested. The best prototype was used in an experiment that combined both 3-D path following and blood clot removal.