Current and future applications impose high demands on software-defined radio (SDR) platforms in terms of latency, reliability, and flexibility. This paper presents a heterogeneous SDR MPSoC with a hexagonal network-on-chip to address these issues. It features four data processing modules and a baseband processing engine for iterative multiple-input multiple-output (MIMO) receiving. Integrated memory controllers enable dynamic data flow mapping and application isolation. In a 4 x 4 MIMO application scenario, the MPSoC achieves a throughput of 232 Mbit/s with a latency of 20 μs while consuming 414 mW. It outperforms state-of-the-art platforms in terms of throughput by a factor of 4.

Emulating spiking neural networks on analog neuromorphic hardware offers several advantages over simulating them on conventional computers, particularly in terms of speed and energy consumption. However, this usually comes at the cost of reduced control over the dynamics of the emulated networks. In this paper, we demonstrate how iterative training of a hardware-emulated network can compensate for anomalies induced by the analog substrate. We first convert a deep neural network trained in software to a spiking network on the BrainScaleS wafer-scale neuromorphic system, thereby enabling an acceleration factor of 10000 compared to the biological time domain. This mapping is followed by the in-the-loop training, where in each training step, the network activity is first recorded in hardware and then used to compute the parameter updates in software via backpropagation. An essential finding is that the parameter updates do not have to be precise, but only need to approximately follow the correct gradient, which simplifies the computation of updates. Using this approach, after only several tens of iterations, the spiking network shows an accuracy close to the ideal software-emulated prototype. The presented techniques show that deep spiking networks emulated on analog neuromorphic devices can attain good computational performance despite the inherent variations of the analog substrate.

We present a dynamic voltage and frequency scaling technique within SoCs for per-core power management: the architecture allows for individual, self triggered performance-level scaling of the processing elements (PEs) within less than 100ns. This technique enables each core to adjust its local supply voltage and frequency depending on its current computational load. A test chip has been implemented in 28nm CMOS technology, as prototype of the SpiNNaker2 neuromorphic many core system, containing 4 PEs which are operational within the range of 1.1V down to 0.7V at frequencies from 666MHz down to 100MHz; The particular domain area of this application specific processor is real-time neuromorphics. Using a standard benchmark - the synfire chain - we show that the total power consumption can be reduced by 45%, with 85% baseline power reduction and a 30% reduction of energy per neuron and synapse computation, all while maintaining biological real-time operation.

We present a dynamic voltage and frequency scaling technique within SoCs for per-core power management: the architecture allows for individual, self triggered performance-level scaling of the processing elements (PEs) within less than 100ns. This technique enables each core to adjust its local supply voltage and frequency depending on its current computational load. A test chip has been implemented in 28nm CMOS technology, as prototype of the SpiNNaker2 neuromorphic many core system, containing 4 PEs which are operational within the range of 1.1V down to 0.7V at frequencies from 666MHz down to 100MHz; the effectiveness of the power management technique is demonstrated using a standard benchmark from the application domain. The particular domain area of this application specific processor is real-time neuromorphics. Using a standard benchmark - the synfire chain - we show that the total power consumption can be reduced by 45%, with 85% baseline power reduction and a 30% reduction of energy per neuron and synapse computation, all while maintaining biological real-time operation.

Despite being originally inspired by the central nervous system, artificial neural networks have diverged from their biological archetypes as they have been remodeled to fit, particular tasks. In this paper, we review several possibilites to reverse map these architectures to biologically more realistic spiking networks with the aim of emulating them on fast, low-power neuromorphic hardware. Since many of these devices employ analog components, which cannot, be perfectly controlled, finding ways to compensate for the resulting effects represents a key challenge. Here, we discuss three different, strategies to address this problem: the addition of auxiliary network components for stabilizing activity, the utilization of inherently robust, architectures and a training method for hardware-emulated networks that, functions without, perfect, knowledge of the system's dynamics and parameters. For all three scenarios, we corroborate our theoretical considerations with experimental results on accelerated analog neuromorphic platforms.

This paper presents a heterogeneous database hardware accelerator MPSoC manufactured in 28 nm SLP CMOS. The 18 mm2 chip integrates a runtime task scheduling unit for energy-efficient query processing and hierarchical power management supported by an ultra-fast dynamic voltage and frequency scaling. Four processing elements, connected by a star-mesh network-on-chip, are accelerated by an instruction set extension tailored to fundamental data-intensive applications. We evaluate the MPSoC with typical database benchmarks focusing on scans and bitmap operations. When the processing elements operate on data stored in local memories, the chip consumes 250 mW and shows a 96x energy efficiency improvement compared to state-of-the-art platforms.

This demonstration is based on the wafer-scale neuromophic system presented in the previous papers by Schemmel et. al. (20120), Scholze et. al. (2011) and Millner et. al. (2010). The demonstration setup will allow the visitors to monitor and partially manipulate the neural events at every level. They will get an insight into the complex interplay between packet-based and realtime communication necessary to combine continuous-time mixed-signal neural networks with a packet-based transport network. Several network experiments implemented on the setup will be accessible for user interaction.

Traditionally, the communication in neuromorphic VLSI systems has been done via parallel asynchronous transmission of Address-Event-Representations (AER) of neuron pulses. Recently, there has been a move towards greater event transmission speed via a serialization of the AER protocols. We give a live demonstration of a packet based synchronous serial AER infrastructure presented in a recent paper, which handles the complete off-wafer communication and configuration for a newly developed waferscale neuromorphic system, operating at a factor of 104faster than biological real-time. Pulse packets are routed from the host PC via Gbit Ethernet to an FPGA board, which forwards them to 4 purpose designed Digital Network ASICs (DNCs) on the same board. The DNCs buffer and sort the pulses, implementing 32 2GBit/s Low Voltage Differential Signaling (LVDS) interfaces to the neuromorphic circuits on the wafer. Pulse communication to other wafers is done via an FPGA- FPGA communication using 10 Gbit/s Aurora links.