In this paper, we propose LoRaSeek, a lightweight and reliable LoRa denoising framework that enhances signal quality and robustness for neural-enhanced LoRa decoding. LoRaSeek integrates a hybrid architecture combining Convolutional Neural Networks (CNNs), Transformers, and a hierarchical U-Net to effectively capture multi-scale, multidimensional features of LoRa chirp signals. To maintain efficiency, we integrate a lightweight Transformer block that supports various LoRa configurations while keeping computational overhead low. Additionally, we incorporate dual attention-based skip connections to preserve chirp signal properties across different scales. Experiments across diverse LoRa configurations show that LoRaSeek achieves 2.04–3.86 dB signal-to-noise ratio (SNR) gains over standard decoding methods and up to 3.03 dB improvement over state-of-the-art neural-enhanced LoRa decoding methods while reducing model storage by up to 7.4× and inference time by up to 1.6×.

LoRa has been widely used for the Internet of Things (IoT) due to its low power consumption and long communication range. The standard LoRa demodulation process condenses the energy of LoRa chirps to combat noise. However, there is an intrinsic frequency jump in real-life LoRa signals that standard demodulation neglects, reducing communication range in practice. We thoroughly study the frequency jump phenomenon and observe that it affects LoRa demodulation mainly in two folds: First, it makes each section of the signal shorter than the standard FFT perception range, introducing additional noise; Second, it induces a random phase jump that causes destructive addition of signal power. To mitigate the influence of frequency jump on LoRa demodulation, we propose LoRaTrimmer, a novel, fast, and noise-resilient LoRa decoding algorithm that optimally condenses LoRa signal power. LoRaTrimmer contains two innovative designs: First, we trim the perception range of FFT at the frequency jump, trimming off the additional noise; Second, we bypass the phase jump induced by frequency jump by probabilistic modeling and add up signal power constructively. Furthermore, we performed theoretical analysis to guarantee the performance of our method. Thorough experiments in various real-life environments show 1.70 to 2.49 dB SNR gain over the state-of-the-art and 3.44 to 3.79 dB SNR gain over FFT-based methods, translating to at most 1.67 times gain of coverage area. LoRaTrimmer is also robust under complex noise patterns, and capable of real-time decoding, with the only overhead being a slight increase in computational cost (0.51 to 3.17 ms per packet, compared with 0.23 to 0.94 ms of baseline methods).

Soil monitoring plays an essential role in agricultural systems. Rather than deploying sensors' antennas above the ground, burying them in the soil is an attractive way to retain a non-intrusive aboveground space. Low Power Wide-Area Network (LPWAN) has shown its long-distance and low-power features for aboveground Internet-of-Things (IoT) communication, presenting a potential of extending to underground cross-soil communication over a wide area, which however has not been investigated before. The variation of soil conditions brings significant signal polarization misalignment, degrading communication reliability. In this paper, we propose Demeter, a low-cost low-power programmable antenna design to keep reliable cross-soil communication automatically. First, we propose a hardware architecture to enable polarization adjustment on commercial-off-the-shelf (COTS) single-RF-chain LoRa radio. Moreover, we develop a low-power programmable circuit to obtain polarization adjustment. We further design an energy-efficient heuristic calibration algorithm and an adaptive calibration scheduling method to keep signal polarization alignment automatically. We implement Demeter with a customized PCB circuit and COTS devices. Then, we evaluate its performance in various soil types and environmental conditions. The results show that Demeter can achieve up to 11.6 dB SNR gain indoors and 9.94 dB outdoors, 4× horizontal communication distance, at least 20 cm deeper underground deployment, and up to 82% energy consumption reduction per day compared with the standard LoRa.

LoRa and its enabled LoRa wide-area network (LoRaWAN) have been seen as an important part of the next-generation network for massive Internet-of-Things (IoT). Due to LoRa's low-power and long-range nature, LoRa signals are much weaker than the noise floor, particularly in complex urban or semi-indoor environments. Therefore, weak signal decoding is critical to achieve the desired wide-area coverage in general. Existing work has shown the advantages of exploring deep neural networks (DNN) for weak signal decoding. However, the existing single-gateway based DNN decoder is hard to fully leverage the spatial information in multi-gateway scenarios. In this paper, we propose SRLoRa, an efficient DNN LoRa decoder that fully utilizes the spatial information from multiple gateways to decode extremely weak LoRa signals. Specifically, we design interleaving denoising and merging layers to improve signal quality at ultra-low SNR. We develop efficient merging on feature maps extracted by denoising DNNs to tolerate time misalignments among different signals. We define max and min operations in the merging layer to efficiently extract salient features and reduce noise, merging the features extracted from multiple gateways to guide future DNN layers to gradually improve signal quality. We implement SRLoRa with USPR N210 and commercial LoRa nodes and evaluate its performance indoors and outdoors. The results show that with four gateways, SRLoRa achieves SNR gain at 4.53--4.82 dB, which is 2.51× of Charm, leading to a 1.84× coverage area compared to standard LoRa in an urban deployment.

The screens of our smartphones and laptops display our private information persistently. The term “shoulder surfing” refers to the behavior of unauthorized people peeking at our screens, easily causing severe privacy leakages. Many countermeasures have been used to prevent naked eye-based peeking by reducing the possible peeking distance. However, the risk from modern smartphones with powerful cameras is underestimated. In this paper, we propose SRPeek, a long-distance shoulder surfing attack method using smartphones. Our key observation is that although a single image captured by smartphone cameras is blurred, the attacker can leverage super-resolution (SR) techniques to recover the information from multiple blurry images. We design an end-to-end system deployed on commercial smartphones, including an innovative deep neural network (DNN) architecture, StARe, for efficient multi-image SR. We implement SRPeek in Android and conduct extensive experiments to evaluate its performance. The results demonstrate we can recognize 90% of characters at a distance of 6m with telephoto lenses and 1.8m with common lenses, calling for the vigilance of the Quietly growing shoulder surfing threat.

Indoor localization is becoming an emerging requirement in many large shopping malls. Existing indoor localization systems, however, require exhausted system bootstraps and calibration phases. The huge sunk cost usually hinders practical deployment of the indoor localization systems in large shopping malls. In contrast, we observe that floor-plan images of large shopping malls, which highlight the positions of many shops, are widely available in Google Maps, Gaode Maps, Baidu Maps, etc. According to several observed shops, people can localize themselves (called self-localization). However, due to the requirements of geometric sense and space transformation, not all people get used to this way. In this article, we propose EyeLoc, which uses smartphone vision to enable accurate self-localization on a floor-plan image. EyeLoc addresses several challenges, including developing a ubiquitous smartphone vision system, extracting efficient vision clues, and achieving robust measurement error mitigation. We implement EyeLoc in Android and evaluate its performance in emulated environment, two large shopping malls and a semioutdoor large Outlets. The results show that the 90-percentile errors of localization and heading direction are 5.97 m and 20° in 70 000 m2malls.