While neural lossy compression techniques have markedly advanced the efficiency of Channel State Information (CSI) compression and reconstruction for feedback in MIMO communications, efficient algorithms for more challenging and practical tasks—such as CSI compression for future channel prediction and reconstruction with relevant side information—remain underexplored, often resulting in suboptimal performance when existing methods are extended to these scenarios. To that end, we propose a novel framework for compression with side information, featuring an encoding process with fixed-rate compression using a trainable codebook for codeword quantization, and a decoding procedure modeled as a backward diffusion process conditioned on both the codeword and the side information. Experimental results show that our method significantly outperforms existing CSI compression algorithms, often yielding over twofold performance improvement by achieving comparable distortion at less than half the data rate of competing methods in certain scenarios. These findings underscore the potential of diffusion-based compression for practical deployment in communication systems.

Quantum Annealing (QA)-accelerated MIMO detection is an emerging research approach in the context of NextG wireless networks. The opportunity is to enable large MIMO systems and thus improve wireless performance. The approach aims to leverage QA to expedite the computation required for theoretically optimal but computationally-demanding Maximum Likelihood detection to overcome the limitations of the currently deployed linear detectors. This paper presents X-ResQ, a QA-based MIMO detector system featuring flexible parallelism that is uniquely enabled by quantum Reverse Annealing (RA). Unlike prior designs, X-ResQ has many desirable parallel QA system properties and has effectively improved detection performance as more qubits are assigned. In our evaluations on a state-of-the-art quantum annealer, fully parallel X-ResQ achieves near-optimal throughput for 4 × 6 MIMO with 16-QAM using approx. 240 qubits achieving 2.5–5× gains compared against other classical and quantum detectors. We also implement and evaluate X-ResQ in the non-quantum digital setting for more comprehensive evaluations. This classical X-ResQ showcases the potential to realize ultra-large 1024 × 1024 MIMO, significantly outperforming other MIMO detectors, including the state-of-the-art RA detector classically implemented in the same way.

We present the Hybrid Polar Decoder (HyPD), a hybrid classical-quantum decoder design for Polar error correction codes, which are becoming widespread in today’s 5G and tomorrow’s 6G networks. HyPD employs CMOS processing for the Polar decoder’s binary tree traversal, and Quantum Annealing (QA) processing for the Quantum Polar Decoder (QPD)-a Maximum-Likelihood QA-based Polar decoder submodule. QPD’s design efficiently transforms a Polar decoder into a quadratic polynomial optimization form, then maps this polynomial on to the physical QA hardware via QPD-MAP, a customized problem mapping scheme tailored to QPD. We have experimentally evaluated HyPD on a state-of-the-art QA device with 5,627 qubits, for 5G-NR Polar codes with block length of 1,024 bits, in Rayleigh fading channels. Our results show that HyPD outperforms Successive Cancellation List decoders of list size eight by half an order of bit error rate magnitude, and achieves a 1,500-bytes frame delivery rate of 99.1%, at 1 dB signal-to-noise ratio. Further studies present QA compute time considerations. We also propose QPD-HW, a novel QA hardware topology tailored for the task of decoding Polar codes. QPD-HW is sparse, flexible to code rate and block length, and may be of potential interest to the designers of tomorrow’s 6G wireless networks.

We present the Hybrid Polar Decoder (HyPD), a hybrid of classical CMOS and quantum annealing (QA) computational structures for decoding Polar error correction codes, which are becoming widespread in today's 5G and tomorrow's 6G networks. HyPD considers CMOS for the Polar code's binary tree traversal, and QA for executing a Quantum Polar Decoder (QPD)-a novel QA-based maximum likelihood submodule. Our QPD design efficiently transforms a Polar decoder into a quadratic polynomial optimization form amenable to the QA's optimization process. We experimentally evaluate HyPD on a state-of-the-art QA device with 5,627 qubits, for Polar codes of block length 1,024 bits, in Rayleigh fading channels. Our results show that HyPD outperforms successive cancellation list decoders of list size eight by half an order of bit error rate magnitude at 1 dB SNR. Further experimental studies address QA compute time at various code rates, and with increased QA qubit numbers.

With the continuous growth of the Internet of Things (IoT), the trend of increasing numbers of IoT devices will continue. To increase the network's capability to support a large number of active devices accessing a network concurrently, this work presents IoT-ResQ, a warm-started quantum annealing-based multi-device detector via quantum reverse annealing (RA). Unlike in typical quantum forward annealing (FA) protocol, IoT-ResQ's RA starts its search operation on a controllable candidate classical state, instead of a quantum superposition, and thus allows refined local quantum search around the initial state. This procedure can provide an opportunity of utilizing both conventional classical- and quantum-based detectors together in a hybrid synergy, to boost quantum optimization performance, mitigating the effect of quantum decoherence and noise on quantum hardware. In our evaluation, IoT-ResQ achieves nearly two to three orders of magnitude better BER and over 2X packet success rate with packet size of 32-byte compared to other quantum and conventional detectors at SNR 9 dB to support 48 active IoT devices with QPSK modulation (implying 48,000 deployed devices with 0.1% wake-up radio rate at a time), requiring ≈ 140 μs pure compute time for detection.