The breakdown of Dennard scaling has been the driver for many innovations such as multicore CPUs and has fueled the research into novel devices such as resistive random access memory (RRAM). These devices might be a means to extend the scalability of integrated circuits since they allow for fast and nonvolatile operation. Unfortunately, large analog circuits need to be designed and integrated in order to benefit from these cells, hindering the implementation of large systems. This work elaborates on a novel solution, namely, creating digital standard cells utilizing RRAM devices. Albeit this approach can be used both for small gates and large macroblocks, we illustrate it for a 2T2R-cell. Since RRAM devices can be vertically stacked with transistors, this enables us to construct anandstandard cell, which merely consumes the area of two transistors. This leads to a 25% area reduction compared to an equivalent CMOSnandgate. We illustrate achievable area savings with a half-adder circuit and integrate this novel cell into a digital standard cell library. A synthesized RISC-V core using RRAM-based cells results in a 10.7% smaller area than the equivalent design using standard CMOS gates.

The Discrete Fourier Transform (DFT) holds a prominent place in the field of signal processing. The development of DFT accelerators in edge devices requires high energy efficiency due to the limited battery capacity. In this context, emerging devices such as resistive RAM (RRAM) provide a promising solution. They enable the design of high-density crossbar arrays and facilitate massively parallel and in situ computations within memory. However, the reliability and performance of the RRAM-based systems are compromised by the device non-idealities, especially when executing DFT computations that demand high precision. In this paper, we propose a novel adaptive variability-aware crossbar mapping scheme to address the computational errors caused by the device variability. To quantitatively assess the impact of variability in a communication scenario, we implemented an end-to-end simulation framework integrating the modulation and demodulation schemes. When combining the presented mapping scheme with an optimized architecture to compute DFT and inverse DFT(IDFT), compared to the state-of-the-art architecture, our simulation results demonstrate energy and area savings of up to 57 % and 18 %, respectively. Meanwhile, the DFT matrix mapping error is reduced by 83% compared to conventional mapping. In a case study involving 16-quadrature amplitude modulation (QAM), with the optimized architecture prioritizing energy efficiency, we observed a bit error rate (BER) reduction from 1.6e-2 to 7.3e-5. As for the conventional architecture, the BER is optimized from 2.9e-3 to zero.

This paper presents an approach to accelerate One-Class Support Vector Machines (SVM) using a hardware-friendly kernel that doesn't rely on multiplication operations, thus adaptable to hardware platforms. Leveraging Nyström approximation, we implemented a pipeline and compared its performance against a software implementation using libsvm. Furthermore, we evaluated the efficiency of our approach by deploying it on an FPGA. Our experiments, conducted on the SWaT dataset, demonstrate a 50x speedup using the FPGA implementation, achieving a classification time of 21 microseconds per instance. Importantly, we find no degradation in performance, as measured by the f-score of the attack class in the test set. This study explores the potential of hardware acceleration in optimizing anomaly detection systems for real-time applications.