The adoption of 3D NAND has significantly increased the SSD density; however, 3D NAND density-increasing techniques, such as extensive stacking of cell layers, can amplify read disturbances and shorten SSD lifetime. From our lifetime-impact characterization on 8 state-of-the-art SSDs, we observe that the 3D TLC/QLC SSDs can be worn-out by low read-only workloads within their warranty period since a huge amount of read disturbance-induced rewrites are performed in the background. To understand alternative read disturbance mitigation opportunities, we also conducted read-latency characterizations on 2 other SSDs without the background rewrite mechanism. The collected results indicate that, without the background rewriting, the read latencies of the majority of data become higher, as the number of reads on the data increases. Motivated by these two characterizations, in this paper, we propose to relax the short read latency constraint on the high-density 3D SSDs. Specifically, our proposal relies on the hint information passed from applications to SSDs that specifies the expected read performance. By doing so, the lifetime consumption caused by the read-induced writes can be reduced, thereby prolonging the SSD lifetime. The detailed experimental evaluations show that our proposal can reduce up to 56% of the rewrite-induced spent-lifetime with only 2% lower performance, under a file-server application.

The high density of 3D NAND-based SSDs comes with longer write latencies due to the increasing program complexity. To address this write performance degradation issue, NAND flash manufacturers implement a 3D NAND-specific full-sequence program (FSP) operation. The FSP can program multiple-bit information into a cell simultaneously with the same latency as the baseline program operation, thereby dramatically boosting the write performance. However, directly adopting the (large granularity) FSP operation in SSD firmware can result in a lifetime degradation problem, where small writes are amplified to large granularities with a significant fraction of empty data. This problem cannot completely be mitigated by the DRAM buffer in the SSDs since the “sync” commands from the host prevent the DRAM buffer from accumulating enough written data. To solve this FSP-induced performance/lifetime dilemma, in this work, we propose and evaluate GSSA (Generalized and Specialized Scramble Allocation), a novel written-data allocation scheme in SSD firmware, which considers both various 3D NAND program operations and the internal 3D NAND flash architecture. By adopting GSSA, SSDs can enjoy the performance benefits brought by the FSP without excessively consuming the lifetime. Our experimental evaluations reveal that GSSA can achieve the throughput and the spent-lifetime of the best-performance and best-lifetime single granularity schemes, respectively.

A recommender system is a system that recommends products or services that best meet the preferences of each customer using statistical or machine learning techniques. Collaborative Filtering (CF) has been used the most as an algorithm for implementing recommender systems. However, in most cases, it has only used purchase history or customer's ratings though there are numerous available data provided by customers. E-commerce customers frequently use a search function to find the products they are interested in among the vast array of products offered. Such search keywords data may be a very useful information source for modeling customer's preference. However, it is rarely used as a source of information for recommendation systems. In this paper, we propose a novel hybrid CF model based on Doc2Vec using search keywords and purchase history data of online shopping mall customers. To validate the applicability of the proposed model, we empirically tested its performance using a real-world online shopping mall data in Korea. As a result, we found that search keywords data might effectively represent the preference of customers, and contribute to the improvement of conventional CF.