As a retina-inspired sensor with ultra-high temporal resolution, spike camera can continuously capture dynamic scenes with high-speed motion. It is a key task to restore clear images from spike streams. The quantization effects in spike readout bring degradation to the visual quality of restored images. To tackle the degradation without introducing motion blur, existing methods often employ a short-term temporal window to infer the light intensity at a certain time point. However, these methods only focus on the spike signals within the current window, which limits their performance. Motivated by the human-like memory mechanism for visual signals from the retina, we explore Spike Stream Memory Transfer (SSMT) to restore the dynamic scenes, considering spike signals beyond the window. Specifically, we design a framework that leverages temporal memory by transferring previously inferred light intensity and motion to enhance current reconstruction. The framework enables a long-term temporal perception of spike streams to handle the spike quantization effects. Besides, we utilize the estimated motion to suppress the potential blur from inter-stream clips, considering the underlying motion of spike streams. We also develop a spike interval-guided alignment module to tackle the blur from intra-stream clips. Experimental results on both synthetic and real-captured data demonstrate that our method can restore high-quality images from spike streams.

With the daily influx of 3D data on the internet, text-3D retrieval has gained increasing attention. However, current methods face two major challenges: Hierarchy Representation Collapse (HRC) and Redundancy-Induced Saliency Dilution (RISD). HRC compresses abstract-to-specific and whole-to-part hierarchies in Euclidean embeddings, while RISD averages noisy fragments, obscuring critical semantic cues and diminishing the model’s ability to distinguish hard negatives. To address these challenges, we introduce the Hyperbolic Hierarchical Alignment Reasoning Network (H2ARN) for text-3D retrieval. H2ARN embeds both text and 3D data in a Lorentz-model hyperbolic space, where exponential volume growth inherently preserves hierarchical distances. A hierarchical ordering loss constructs a shrinking entailment cone around each text vector, ensuring that the matched 3D instance falls within the cone, while an instance-level contrastive loss jointly enforces separation from non-matching samples. To tackle RISD, we propose a contribution-aware hyperbolic aggregation module that leverages Lorentzian distance to assess the relevance of each local feature and applies contribution-weighted aggregation guided by hyperbolic geometry, enhancing discriminative regions while suppressing redundancy without additional supervision. We also release the expanded T3DR-HIT v2 benchmark, which contains 8,935 text-to-3D pairs, 2.6 times the original size, covering both fine-grained cultural artefacts and complex indoor scenes.

Spike camera is an emerging bio-inspired vision sensor with ultra-high temporal resolution. It records scenes by accumulating photons and outputting binary spike streams. Optical flow estimation aims to estimate pixel-level correspondences between different moments, describing motion information along time, which is a key task of spike camera. High-quality optical flow is important since motion information is a foundation for analyzing spikes. However, extracting stable light-intensity information from spikes is difficult due to the randomness of binary spikes. Besides, the continuity of spikes can offer contextual information for optical flow. In this paper, we propose a network Spike2Flow++ to estimate optical flow for spike camera. In Spike2Flow++, we propose a differential of spike firing time (DSFT) to represent information in binary spikes. Moreover, we propose a dual DSFT representation and a dual correlation construction to extract stable light-intensity information for reliable correlations. To use the continuity of spikes as motion contextual information, we propose a joint correlation decoding (JCD) that jointly estimates a series of flow fields. To adaptively fuse different motions in JCD, we propose a global motion bank aggregation to construct an information bank for all motions and adaptively extract contexts from the bank for each iteration during recurrent decoding of each motion. To train and evaluate our network, we construct a real scene with spikes and flow++ (RSSF++) based on real-world scenes. Experiments demonstrate that our Spike2Flow++ achieves state-of-the-art performance on RSSF++, photo-realistic high-speed motion (PHM), and real-captured data.

Recent advancements in imitation learning have shown promising results in robotic manipulation, driven by the availability of high-quality training data. To improve data collection efficiency, some approaches focus on developing specialized teleoperation devices for robot control, while others directly use human hand demonstrations to obtain training data. However, the former requires both a robotic system and a skilled operator, limiting scalability, while the latter faces challenges in aligning the visual gap between human hand demonstrations and the deployed robot observations. To address this, we propose a human hand data collection system combined with our hand-to-gripper generative model, which translates human hand demonstrations into robot gripper demonstrations, effectively bridging the observation gap. Specifically, a GoPro fisheye camera is mounted on the human wrist to capture human hand demonstrations. We then train a generative model on a self-collected dataset of paired human hand and UMI gripper demonstrations, which have been processed using a tailored data pre-processing strategy to ensure alignment in both timestamps and observations. Therefore, given only human hand demonstrations, we are able to automatically extract the corresponding SE(3) actions and integrate them with high-quality generated robot demonstrations through our generation pipeline for training robotic policy model. In experiments, the robust manipulation performance demonstrates not only the quality of the generated robot demonstrations but also the efficiency and practicality of our data collection method. More demonstrations can be found at: https://rwor.github.io/.

Spike camera is a retina-inspired neuromorphic camera which can capture dynamic scenes of high-speed motion by firing a continuous stream of spikes at an extremely high temporal resolution. The limitation in the current design is that each spike only represents the arrival of a fixed amount of photons. It can not deal with strong light areas in which the amount of accumulated photons reaches the pre-specified threshold multiple times within a single readout interval. In this paper, we propose a new spike camera model of high-speed imaging for high dynamic range scenarios. In this scheme, each pixel accumulates the incoming photons persistently and generates a new type of spike stream in which each spike symbol may be associated with different levels, indicating the arrival of different amounts of photons since the last readout. This enables the camera to support dynamic scenes with wider dynamic range. To achieve this, we propose a two-level buffer mechanism, one for photon accumulation and one for spike-firing encoding. We use a register to hold the number of spike-firings which has not been read out yet. At each readout time, the major part in the counter is read out via a carefully designed exponential encoding and the counter is updated. Such encoding and readout strategy enables a very efficient expansion of the dynamic range using a small number of encoding bits. Furthermore, we propose an image reconstruction scheme for the proposed camera, utilizing both spike intervals and spike levels to recover the light intensity. We incorporate Mamba and propose a temporal-spatial selective scan mechanism to extract temporal-spatial correlation within spike streams. We employ a pyramid adaptive filtering and alignment module to achieve coarse-to-fine feature alignment. Experimental results show that the proposed scheme can achieve better imaging quality and outperform the existing spike camera in high dynamic range scenarios.

As an emerging neuromorphic camera with an asynchronous working mechanism, spike camera shows good potential for high-speed vision tasks. Each pixel in spike camera accumulates photons persistently and fires a spike whenever the accumulation exceeds a threshold. Such high-frequency fine-granularity photon recording facilitates the analysis and recovery of dynamic scenes with high-speed motion. This paper considers the optical flow estimation problem for spike cameras. Due to the Poisson nature of incoming photons, the occurrence of spikes is random and fluctuating, making conventional image matching inefficient. We propose a Hierarchical Spatial-Temporal (HiST) fusion module for spike representation to pursue reliable feature matching and develop a robust optical flow network, dubbed as HiST-SFlow. The HiST extracts features at multiple moments and hierarchically fuses the spatial-temporal information. We also propose an intra-moment filtering module to further extract the feature and suppress the influence of randomness in spikes. A scene loss is proposed to ensure that this hierarchical representation recovers the essential visual information in the scene. Experimental results demonstrate that the proposed method achieves state-of-the-art performance compared with the existing methods. The source codes are available at https://github.com/ruizhao26/HiST-SFlow.

As a bio-inspired vision sensor with ultra-high speed, spike cameras exhibit great potential in recording dynamic scenes with high-speed motion or drastic light changes. Different from traditional cameras, each pixel in spike cam-eras records the arrival of photons continuously by firing binary spikes at an ultra-fine temporal granularity. In this process, multiple factors impact the imaging, including the photons' Poisson arrival, thermal noises from circuits, and quantization effects in spike readout. These factors intro-duce fluctuations to spikes, making the recorded spike in-tervals unstable and unable to reflect accurate light intensi-ties. In this paper, we present an approach to deal with spike fluctuations and boost spike camera image reconstruction. We first analyze the quantization effects and reveal the unbi-ased estimation attribute of the reciprocal of differential of spike firing time (DSFT). Based on this, we propose a spike representation module to use DSFT with multiple orders for fluctuation suppression, where DSFT with higher or-ders indicates spike integration duration between multiple spikes. We also propose a module for inter-moment feature alignment at multiple granularities. The coarser alignment is based on patch-level cross-attention with a local search strategy, and the finer alignment is based on deformable convolution at the pixel level. Experimental results demon-strate the effectiveness of our method on both synthetic and real-captured data. The source code and dataset are avail-able at https://github.com/ruizhao26/BSF.

Spike camera is a bio-inspired sensor with ultra-high temporal resolution and low energy consumption. It captures visual signals using an “integrate-and-fire" mechanism and outputs a continuous stream of binary spikes. Reconstructing image sequence from spikes streams is critical for spike camera. Several reconstruction methods have been proposed in recent years. However, the computational cost of these methods is relatively high. Inspired by the fact that spiking neural networks (SNNs) are energy efficient and support time-series signal processing inherently, we propose a lightweight SNN for spike camera image reconstruction (abbreviated to SSIR). Experimental results show that SSIR achieves comparable performance with the state-of-the-art (SOTA) methods at much lower computation and energy cost.

Spike camera is a kind of neuromorphic sensor that uses a novel ``integrate-and-fire'' mechanism to generate a continuous spike stream to record the dynamic light intensity at extremely high temporal resolution. However, as a trade-off for high temporal resolution, its spatial resolution is limited, resulting in inferior reconstruction details. To address this issue, this paper develops a network (SpikeSR-Net) to super-resolve a high-resolution image sequence from the low-resolution binary spike streams. SpikeSR-Net is designed based on the observation model of spike camera and exploits both the merits of model-based and learning-based methods. To deal with the limited representation capacity of binary data, a pixel-adaptive spike encoder is proposed to convert spikes to latent representation to infer clues on intensity and motion. Then, a motion-aligned super resolver is employed to exploit long-term correlation, so that the dense sampling in temporal domain can be exploited to enhance the spatial resolution without introducing motion blur. Experimental results show that SpikeSR-Net is promising in super-resolving higher-quality images for spike camera.

Image Restoration from Partial Random Samples (RRS) has been studied in many image restoration works. There are also some attempts to use convolutional neural networks (CNNs) to handle it. However, most existing neural network-based methods perform poorly in generalization and we need to train a specific model for each degradation situation. Besides, the sampling mask which represents the positions of the sampled pixels is not used effectively in these methods. To address the problems, we propose an optimization-inspired network called RRSNet based on our derivation of the iterative optimization formulas for RRS. In our method, we design a CNN with two encoders and one decoder for training, setting up a flexible and effective prior. To make the most of the sampling information, we concatenate the degraded image with the mask and input them into one encoder for better generalization. Then we split the pixels into two groups according to the mask and extract their features as the input of another encoder. Experiments demonstrate that our RRSNet with the mask input can handle various sampling ratios using only one trained model and achieve the best restoration performance among all comparison methods.

Efficiently selecting an appropriate spike stream data length to extract precise information is the key to the spike vision tasks. To address this issue, we propose a dynamic timing representation for spike streams. Based on multi-layers architecture, it applies dilated convolutions on temporal dimension to extract features on multi-temporal scales with few parameters. And we design layer attention to dynamically fuse these features. Moreover, we propose an unsupervised learning method for optical flow estimation in a spike-based manner to break the dependence on labeled data. In addition, to verify the robustness, we also build a spike-based synthetic validation dataset for extreme scenarios in autonomous driving, denoted as SSES dataset. It consists of various corner cases. Experiments show that our method can predict optical flow from spike streams in different high-speed scenes, including real scenes. For instance, our method achieves $15\%$ and $19\%$ error reduction on PHM dataset compared to the best spike-based work, SCFlow, in $\Delta t=10$ and $\Delta t=20$ respectively, using the same settings as in previous works. The source code and dataset are available at \href{https://github.com/Bosserhead/USFlow}{https://github.com/Bosserhead/USFlow}.

Event camera has offered promising alternative for visual perception, especially in high speed and high dynamic range scenes. Recently, many deep learning methods have shown great success in providing model-free solutions to many event-based problems, such as optical flow estimation. However, existing deep learning methods did not address the importance of temporal information well from the perspective of architecture design and cannot effectively extract spatio-temporal features. Another line of research that utilizes Spiking Neural Network suffers from training issues for deeper architecture. To address these points, a novel input representation is proposed that captures the events temporal distribution for signal enhancement. Moreover, we introduce a spatio-temporal recurrent encoding-decoding neural network architecture for event-based optical flow estimation, which utilizes Convolutional Gated Recurrent Units to extract feature maps from a series of event images. Besides, our architecture allows some traditional frame-based core modules, such as correlation layer and iterative residual refine scheme, to be incorporated. The network is end-to-end trained with self-supervised learning on the Multi-Vehicle Stereo Event Camera dataset. We have shown that it outperforms all the existing state-of-the-art methods by a large margin.

As a bio-inspired sensor with high temporal resolution, the spiking camera has an enormous potential in real applications, especially for motion estimation in high-speed scenes. However, frame-based and event-based methods are not well suited to spike streams from the spiking camera due to the different data modalities. To this end, we present, SCFlow, a tailored deep learning pipeline to estimate optical flow in high-speed scenes from spike streams. Importantly, a novel input representation is introduced which can adaptively remove the motion blur in spike streams according to the prior motion. Further, for training SCFlow, we synthesize two sets of optical flow data for the spiking camera, SPIkingly Flying Things and Photo-realistic Highspeed Motion, denoted as SPIFT and PHM respectively, corresponding to random high-speed and well-designed scenes. Experimental results show that the SCFlow can predict optical flow from spike streams in different high-speed scenes. Moreover, SCFlow shows promising generalization on real spike streams. Codes and datasets refer to https://github.com/Acnext/Optical-Flow-For-Spiking-Camera.

Spike camera is an emerging bio-inspired vision sensor with ultra-high temporal resolution. It records scenes by accumulating photons and outputting continuous binary spike streams. Optical flow is a key task for spike cameras and their applications. A previous attempt has been made for spike-based optical flow. However, the previous work only focuses on motion between two moments, and it uses graphics-based data for training, whose generalization is limited. In this paper, we propose a tailored network, Spike2Flow that extracts information from binary spikes with temporal-spatial representation based on the differential of spike firing time and spatial information aggregation. The network utilizes continuous motion clues through joint correlation decoding. Besides, a new dataset with real-world scenes is proposed for better generalization. Experimental results show that our approach achieves state-of-the-art performance on existing synthetic datasets and real data captured by spike cameras. The source code and dataset are available at \url{https://github.com/ruizhao26/Spike2Flow}.

Optical flow estimation is a fundamental task in computer vision and image processing. Due to the difficulty in obtaining the ground truth of flow field, unsupervised learning approaches attract more and more research interests in recent years. However, despite of their good generalization capability, unsupervised optical flow methods suffer in the scenarios with large displacement, small objects, and occlusions. In this work, we propose a novel optical flow network based on decoder with multi-scale kernels. Different from previous U-Net like or pyramidal methods, we design our network based on RAFT architecture that with a 4D correlation layer and recurrent decoder. More importantly, we incorporate three novel ideas with regard to the input, information processing and output of the update units improve the performance. Firstly, we utilize various motion-related information as input to the update units. Secondly, we propose a module of multi-scale update unit. Thirdly, for the final flow up-sampling procedure, we propose an image-guided up-sampling loss to guide the learning of up-sampling masks. Our model is trained by the occlusion-aware photometric loss, edge-aware smoothness loss, self-supervised loss, and image-guided up-sampling loss. Experimental results demonstrate that our model achieves the state-of-the-art performance on both Sintel and KITTI and outperforms other unsupervised optical flow methods remarkably.

Benefiting from learning the residual between low resolution (LR) image and high resolution (HR) image, image super-resolution (SR) networks demonstrate superior reconstruction performance in recent studies. However, for the images with rich texture information, the residuals are complex and difficult for networks to learn. To address this problem, we propose a recurrent residual refinement network (RRRN) to gradually refine the residual with a recurrent structure. Instead of directly reconstructing the residual between LR image and HR image, each sub-network in our framework reconstructs the residual between SR image from previous stage and HR image, i.e. recovers the residual of residual (RoR). Considering the domain gap between the image feature and the RoR feature, we introduce a residual projection block to explicitly transform the feature from image domain to RoR domain. The RoR feature is further optimized in an iterative up- and down-sampling manner with a residual learning block. We construct the structure of each block based on the optimization methods of conventional SR and improve our network with dense connections. Experimental results prove that our method improves the quality of super-resolution images on different datasets with variable scenes.

With the development of emerging computer vision applications, there is an increasing demand for capturing the scenes with high-speed motion. Recently, a novel retina-inspired spike camera has shown great potential for recording the dynamic scenes at high temporal resolution. Different from the conventional digital cameras that capture the visual scene by a single snapshot, the spike camera monitors the incoming light persistently, with each pixel producing a continuous stream of spikes. Recovering the motion process from the spike data sequence is an important problem to study for the spike camera, as it is the foundation of many other tasks, such as image reconstruction, object tracking and object detection. In this paper, we carefully analyze the characteristics of spike data and develop a motion estimation algorithm to recover the continuous high-speed motion process from the spike camera data sequence. Based on the assumption that the spike intervals passed by the same motion trajectories usually have the similar spike densities, we establish a data term constraint to model the temporal consistency of spike intervals. In addition, we integrate a local smoothness constraint with the proposed data term constraint to further improve the estimation accuracy. Experimental results demonstrate that our proposed algorithm can recover high-speed motion process from the captured spike data, and the recovered motion information is beneficial for i mage reconstruction.

Traditional optical flow estimation methods mostly focus on images of the same resolution. However, there are some situations requiring optical flow between images of different resolutions, where the traditional approaches suffer from the inequality of spectrum aliasing level. In this paper, we propose a method estimating the flow fields between a clear image and a highly undersampled one. The proposed method simultaneously describes the motion and integral relationship between the images via an integral form image under the assumption of brightness and gradient consistency as well as motion smoothness. We also derive the numerical solution briefly, through which we can solve the equations easily via linearizations. Experimental results on Middlebury and MPI-Sintel datasets demonstrate that our proposed method outperforms traditional methods preprocessing images of different resolutions to be the same size, offering more accurate results.