Building upon recent advances in analog electronic design automation (EDA), this paper discusses directions for reinforcing the connection between design and EDA, in order to develop solutions that are meaningful to designers. Two aspects, both related to bridging the gap between EDA and designers, are highlighted. The first discusses the use of test structures to generate meaningful characterized data to aid design automation, specifically understanding the impact of random, correlated, and systematic variations on the design of matched structures. Results on a recent test chip that analyzes these variations and their impact on EDA design choices will be presented. The second illustrates a design testcase that applies analog EDA techniques, using the ALIGN layout engine, to design an RF MIMO receiver, and describes how this experience has helped both in advancing the state of analog EDA and in building circuits with enhanced designer productivity.

Due to the inherent error-tolerance of machine learning (ML) algorithms, many parts of the inference computation can be performed with adequate accuracy and low power under relatively low precision. Early approaches have used digital approximate computing methods to explore this space. Recent approaches using analog-based operations achieve power-efficient computation at moderate precision. This work proposes a mixed-signal optimization (MiSO) approach that optimally blends analog and digital computation for ML inference. Based on accuracy and power models, an integer linear programming formulation is used to optimize design metrics of analog/digital implementations. The efficacy of the method is demonstrated on multiple ML architectures.

Process variations and the effect of interconnect parasitics can cause significant perturbations in the performance metrics of capacitive digital-to-analog converters (DACs). This article develops fast constructive procedures for common-centroid placement and routing for binary-weighted and split capacitor array topologies of charge-sharing DACs. Our approach particularly targets FinFET technologies with high wire and via parasitics: in these technology nodes, we show that the switching speed of the capacitor array, as measured by the 3-dB frequency, can be severely degraded by these parasitics, and develop techniques to place and route the capacitor array, for both binary-weighted and split DACs, to optimize the switching speed. A balance between 3-dB frequency and DAC INL/DNL is shown by trading off via counts with dispersion. The approach delivers high-quality results with low runtimes.

Analog designs consist of multiple hierarchical functional blocks. Each block can be built using one of several design topologies, where the choice of topology is based on circuit performance requirements. A major challenge in automating analog design is in the identification of these functional blocks, which enables the creation of hierarchical netlist representations. This can facilitate a variety of design automation tasks, such as circuit layout optimization, because the layout is dictated by constraints at each level, such as symmetry requirements, that depend on the topology of the hierarchical block. Traditional graph-based methods find it hard to automatically identify the large number of structural variants of each block. To overcome this limitation, this article leverages recent advances in graph neural networks (GNNs). A variety of GNN strategies is used to identify netlist elements for circuit functional blocks at higher levels of the design hierarchy, where numerous design variants are possible. At lower levels of hierarchy, where the degrees of freedom in circuit topology is limited, structures are identified using graph-based algorithms. The proposed hierarchical recognition scheme enables the identification of layout constraints, such as symmetry and matching, which enable high-quality hierarchical layouts. This method is scalable across a wide range of analog designs. An experimental evaluation shows a high degree of accuracy over a wide range of analog designs, identifying functional blocks, such as low-noise amplifiers, operational transconductance amplifiers, mixers, oscillators, and band-pass filters, in larger circuits.

Well island generation and well tap placement is an important problem in analog/mixed-signal (AMS) circuits. Well taps can only prevent latchups within a certain radius of influence within a well island, and hence must be appropriately inserted to cover all devices. However, existing automated AMS layout paradigms typically defer the insertion of well taps and creation of well islands to a post-processing step after placement. This alters the placement, resulting in increased area and wire length, as well as circuit performance degradation. Therefore, there is a strong need for a solution that generates well islands and inserts well taps during placement so the placer can account for well overheads in optimizing placement metrics. In this work, we propose a modular solution using a graph-based optimization scheme that can be used within multiple placement paradigms with minimal intrusion. We demonstrate the integration of this scheme into stochastic, analytical, and designer-driven row-based placement. The method is demonstrated in advanced FinFET technologies. Layouts generated using this scheme show better area, wire length, and performance metrics at the cost of a marginal runtime degradation when compared to the post-processing approach. Using our scheme, there is an average improvement of 3% and 4% and a maximum improvement of 23% and 11% in area and wirelength, respectively, of layouts of various classes of AMS circuits at the cost of 17% average and 29% maximum increase in total runtime.

An analog/mixed-signal designer typically performs circuit optimization, involving intensive SPICE simulations, on a schematic netlist and then sends the optimized netlist to layout. During the layout phase, it is vital to maintain symmetry requirements to avoid performance degradation due to mismatch: these constraints are usually specified using user input or by invoking an external tool. Moreover, to achieve high performance, the layout must avoid large interconnect parasitics on critical nets. Prior works that optimize parasitics during placement work with coarse metrics such as the half-perimeter wire length, but these metrics do not appropriately emphasize performance-critical nets. The novel charge flow (CF) formulation in this work addresses both symmetry detection and parasitic optimization. By leveraging schematic-level simulations, which are available “for free” from the circuit optimization step, the approach (a) alters the objective function to emphasize the reduction of parasitics on performance-critical nets, and (b) identifies symmetric elements/element groups. The effectiveness of the CF-based approach is demonstrated on a variety of circuits within a stochastic placement engine.

The accuracy and linearity of capacitive digital-to-analog converters (DACs) depend on precise capacitor ratios, but these ratios are perturbed by process variations and parasitics. This paper develops fast constructive procedures for common-centroid placement and routing for binary-weighted capacitors in charge-sharing DACs. Parasitics also degrade the switching speed of a capacitor array, particularly in FinFET nodes with severe wire/via resistances. To overcome this, the capacitor array is placed and routed to optimize switching speed, measured by the 3dB frequency. A balance between 3dB frequency and DAC INL/DNL is shown by trading off via counts with dispersion. The approach delivers high-quality results with low runtimes.

Well island generation and well tap placement pose an important challenge in automated analog/mixed-signal (AMS) layout. Well taps prevent latchup within a radius of influence in a well island, and must cover all devices. Automated AMS layout flows typically perform well island generation and tap insertion as a postprocessing step after placement. However, this step is intrusive and potentially alters the placement, resulting in increased area, wire length, and performance degradation. This work develops a graph-based optimization that integrates well island generation, well tap insertion, and placement. Its efficacy is demonstrated within a stochastic placement engine. Experimental results show that this approach generates better area, wire length and performance metrics than traditional methods, at the cost of a marginal runtime degradation.

Placement algorithms for analog circuits explore numerous layout configurations in their iterative search. To steer these engines towards layouts that meet the electrical constraints on the design, this work develops a fast feasibility predictor to guide the layout engine. The flow first discerns rough bounds on layout parasitics and prunes the feature space. Next, a Latin hypercube sampling technique is used to sample the reduced search space, and the labeled samples are classified by a linear support vector machine (SVM). If necessary, a denser sample set is used for the SVM, or if the constraints are found to be nonlinear, a multilayer perceptron (MLP) is employed. The resulting machine learning model demonstrated to rapidly evaluate candidate placements in a placer, and is used to build layouts for several analog blocks.

The quality of layouts generated by automated analog design have traditionally not been able to match those from human designers over a wide range of analog designs. The ALIGN (Analog Layout, Intelligently Generated from Netlists) project [2, 3, 6] aims to build an open-source analog layout engine [1] that overcomes these challenges, using a variety of approaches. An important part of the toolbox is the use of machine learning (ML) methods, combined with traditional methods, and this talk overviews our efforts. The input to ALIGN is a SPICE-like netlist and a set of perfor- mance specifications, and the output is a GDSII layout. ALIGN automatically recognizes hierarchies in the input netlist. To detect variations of known blocks in the netlist, approximate subgraph iso- morphism methods based on graph convolutional networks can be used [5]. Repeated structures in a netlist are typically constrained by layout requirements related to symmetry or matching. In [7], we use a mix of graph methods and ML to detect symmetric and array structures, including the use of neural network based approximate matching through the use of the notion of graph edit distances. Once the circuit is annotated, ALIGN generates the layout, going from the lowest level cells to higher levels of the netlist hierarchy. Based on an abstraction of the process design rules, ALIGN builds parameterized cell layouts for each structure, accounting for the need for common centroid layouts where necessary [11]. These cells then undergo placement and routing that honors the geomet- ric constraints (symmetry, common-centroid). The chief parameter that changes during layout is the set of interconnect RC parasitics: excessively large RCs could result in an inability to meet perfor- mance. These values can be controlled by reducing the distance between blocks, or, in the case of R, by using larger effective wire widths (using multiple parallel connections in FinFET technologies where wire widths are quantized) to reduce the effective resistance. ALIGN has developed several approaches based on ML for this purpose [4, 8, 9] that rapidly predict whether a layout will meet the performance constraints that are imposed at the circuit level, and these can be deployed together with conventional algorithmic methods [10] to rapidly prune out infeasible layouts. This presentation overviews our experience in the use of ML- based methods in conjunction with conventional algorithmic ap- proaches for analog design. We will show (a) results from our efforts so far, (b) appropriate methods for mixing ML methods with tra- ditional algorithmic techniques for solving the larger problem of analog layout, (c) limitations of ML methods, and (d) techniques for overcoming these limitations to deliver workable solutions for analog layout automation.

Automated subcircuit identification and annotation enables the creation of hierarchical representations of analog netlists, and can facilitate a variety of design automation tasks such as circuit layout and optimization. Subcircuit identification must navigate the numerous alternative structures that can implement any analog function, but traditional graph-based methods cannot easily identify the large number of such structural variants. The novel approach in this paper is based on the use of a trained graph convolutional neural network (GCN) that identifies netlist elements for circuit blocks at upper levels of the design hierarchy. Structures at lower levels of hierarchy are identified using graph-based algorithms. The proposed recognition scheme organically detects layout constraints, such as symmetry and matching, whose identification is essential for high-quality hierarchical layout. The subcircuit identification method demonstrates a high degree of accuracy over a wide range of analog designs, successfully identifies larger circuits that contain subblocks such as OTAs, LNAs, mixers, oscillators, and band-pass filters, and provides hierarchical decompositions of such circuits.

Automating analog layout is a long-standing research problem, with a history that goes back several decades. While digital design is largely automated today, analog layout has been significantly more resistant: automation has not made much headway in industry settings. There are several reasons for this, including:

Analog layout synthesis requires some elements in the circuit netlist to be matched and placed symmetrically. However, the set of symmetries is very circuit-specific and a versatile algorithm, applicable to a broad variety of circuits, has been elusive. This paper presents a general methodology for the automated generation of symmetry constraints, and applies these constraints to guide automated layout synthesis. While prior approaches were restricted to identifying simple symmetries, the proposed method operates hierarchically and uses graph-based algorithms to extract multiple axes of symmetry within a circuit. An important ingredient of the algorithm is its ability to identify arrays of repeated structures. In some circuits, the repeated structures are not perfect replicas and can only be found through approximate graph matching. A fast graph neural network based methodology is developed for this purpose, based on evaluating the graph edit distance. The utility of this algorithm is demonstrated on a variety of circuits, including operational amplifiers, data converters, equalizers, and low-noise amplifiers.

The problem of analog design automation has vexed several generations of researchers in electronic design automation. At its core, the difficulty of the problem is related to the fact that machinegenerated designs have been unable to match the quality of the human designer. The human designer typically recognizes blocks from a netlist and draws upon her/his experience to translate these blocks into a circuit that is laid out in silicon. The ability to annotate blocks in a schematic or netlist-level description of a circuit is key to this entire process, but it is a process fraught with complexity due to the large number of variants of each circuit type. For example, the number of topologies of operational transconductance amplifiers (OTAs) easily numbers in the hundreds. A designer manages this complexity by dividing this large set of variants into classes (e.g., OTAs may be telescopic, folded cascode, etc.). Even so, the number of minor variations within each class is large. Early approaches to analog design automation attempted to use rule-based methods to capture these variations, but this database of rules required tender care: each new variant might require a new rule. As machine learning (ML) based alternatives have become more viable, alternative forms of solving this problem have begun to be explored.