Emerging deep neural network (DNN) applications require high-performance multi-core hardware acceleration with large data bursts. Classical network-on-chips (NoCs) use serial packet-based protocols suffering from significant protocol translation overheads towards the endpoints. This paper proposes PATRONoC, an open-source fully AXI-compliant NoC fabric to better address the specific needs of multi-core DNN computing platforms. Evaluation of PATRONoC in a 2D-mesh topology shows 34 % higher area efficiency compared to a state-of-the-art classical NoC at 1 GHz. PATRONoC’s throughput outperforms a baseline NoC by 2-8× on uniform random traffic and provides a high aggregated throughput of up to 350 GiB/s on synthetic and DNN workload traffic.

The demand for computation resources and energy efficiency of Convolutional Neural Networks (CNN) applications requires a new paradigm to overcome the “Memory Wall”. Analog In-Memory Computing (AIMC) is a promising paradigm since it performs matrix-vector multiplications, the critical kernel of many ML applications, in-place in the analog domain within memory arrays structured as crossbars of memory cells. However, several factors limit the full exploitation of this technology, including the physical fabrication of the crossbar devices, which constrain the memory capacity of a single array. Multi-AIMC architectures have been proposed to overcome this limitation, but they have been demonstrated only for tiny and custom CNNs or performing some layers off-chip. In this work, we present the full inference of an end-to-end ResNet-18 DNN on a 512-cluster heterogeneous architecture coupling a mix of AIMC cores and digital RISC-V cores, achieving up to 20.2 TOPS. Moreover, we analyze the mapping of the network on the available non-volatile cells, compare it with state-of-the-art models, and derive guidelines for next-generation many-core architectures based on AIMC devices.

The last few years have seen the emergence of IoT processors: ultra-low power systems-on-chips (SoCs) combining lightweight and flexible micro-controller units (MCUs), often based on open-ISA RISC-V cores, with application-specific accelerators to maximize performance and energy efficiency. Overall, this heterogeneity level requires complex hardware and a full-fledged software stack to orchestrate the execution and exploit platform features. For this reason, enabling agile design space exploration becomes a crucial asset for this new class of low-power SoCs. In this scenario, high-level simulators play an essential role in breaking the speed and design effort bottlenecks of cycle-accurate simulators and FPGA prototypes, respectively, while preserving functional and timing accuracy. We present GVSoC, a highly configurable and timing-accurate event-driven simulator that combines the efficiency of C++ models with the flexibility of Python configuration scripts. GVSoC is fully open-sourced, with the intent to drive future research in the area of highly parallel and heterogeneous RISC-V based IoT processors, leveraging three foundational features: Python-based modular configuration of the hardware description, easy calibration of platform parameters for accurate performance estimation, and high-speed simulation. Experimental results show that GVSoC enables practical functional and performance analysis and design exploration at the full-platform level (processors, memory, peripherals and IOs) with a speed-up of 2500× with respect to cycle-accurate simulation with errors typically below 10% for performance analysis.

The deployment of Deep Neural Networks (DNNs) on end-nodes at the extreme edge of the Internet-of-Things is a critical enabler to support pervasive Deep Learning-enhanced applications. Low-Cost MCU-based end-nodes have limited on-chip memory and often replace caches with scratchpads, to reduce area overheads and increase energy efficiency - requiring explicit DMA-based memory transfers between different levels of the memory hierarchy. Mapping modern DNNs on these systems requires aggressive topology-dependent tiling and double-buffering. In this work, we propose DORY (Deployment Oriented to memoRY) - an automatic tool to deploy DNNs on low cost MCUs with typically less than 1MB of on-chip SRAM memory. DORY abstracts tiling as a Constraint Programming (CP) problem: it maximizes L1 memory utilization under the topological constraints imposed by each DNN layer. Then, it generates ANSI C code to orchestrate off- and on-chip transfers and computation phases. Furthermore, to maximize speed, DORY augments the CP formulation with heuristics promoting performance-effective tile sizes. As a case study for DORY, we target GreenWaves Technologies GAP8, one of the most advanced parallel ultra-low power MCU-class devices on the market. On this device, DORY achieves up to 2.5× better MAC/cycle than the GreenWaves proprietary software solution and 18.1× better than the state-of-the-art result on an STM32-H743 MCU on single layers. Using our tool, GAP-8 can perform end-to-end inference of a 1.0-MobileNet-128 network consuming just 63 pJ/MAC on average @ 4.3 fps - 15.4× better than an STM32-H743. We release all our developments - the DORY framework, the optimized backend kernels, and the related heuristics - as open-source software.

The deployment of Quantized Neural Networks (QNN) on advanced microcontrollers requires optimized software to exploit digital signal processing (DSP) extensions of modern instruction set architectures (ISA). As such, recent research proposed optimized libraries for QNNs (from 8-bit to 2-bit) such as CMSIS-NN and PULP-NN. This work presents an extension to the PULP-NN library targeting the acceleration of mixed-precision Deep Neural Networks, an emerging paradigm able to significantly shrink the memory footprint of deep neural networks with negligible accuracy loss. The library, composed of 27 kernels, one for each permutation of input feature maps, weights, and output feature maps precision (considering 8-bit, 4-bit and 2-bit), enables efficient inference of QNN on parallel ultra-low-power (PULP) clusters of RISC-V based processors, featuring the RV32IMCXpulpV2 ISA. The proposed solution, benchmarked on an 8-cores GAP-8 PULP cluster, reaches peak performance of 16 MACs/cycle on 8 cores, performing 21× to 25× faster than an STM32H7 (powered by an ARM Cortex M7 processor) with 15× to 21× better energy efficiency.