The advent of collaborative industrial and house-hold robotics has blurred the demarcation between the human and robot workspace. The capability of robots to function efficiently alongside humans requires new research to be conducted in dynamic environments as opposed to the traditional well-structured laboratory. In this work, we propose an efficient skill transfer methodology comprising intuitive interfaces, efficient optical tracking systems, and compliant control of robotic arm-hand systems. The lightweight wearable interfaces mounted with robotic grippers and hands allow the execution of dexterous activities in dynamic environments without restricting human dexterity. The fiducial and reflective markers mounted on the interfaces facilitate the extraction of positional and rotational information allowing efficient trajectory tracking. As the tasks are performed using the mounted grippers and hands, gripper state information can be directly transferred. The hardware-agnostic nature and efficiency of the proposed interfaces and skill transfer methodology are demonstrated through the execution of complex tasks that require increased dexterity, writing and drawing.

Robot grasping and manipulation allow robots to interact with their environments and execute a plethora of complex tasks that require increased dexterity (e.g., open a door, push buttons, collect and transpose objects, etc.). Collecting data of such activities is of paramount importance as it allows roboticists to create new methods and models that will facilitate the execution of sophisticated tasks. In this paper, we propose new wearable, lightweight, low-cost human machine interfaces that improve the efficiency of the data collection process for both robotic grasping and manipulation by offering intuitive and simplified control of the employed robotic grippers and hands. In particular, two different types of interfaces are proposed: i) a handle-based forearm stabilized interface that uses a waist-linkage system to provide weight support for bulky and heavy robotic end-effectors and ii) a palm-mounted interface that can accommodate smaller and lightweight grippers and hands, offering more agility in the control and positioning of these devices. Both interfaces are equipped with appropriate sliders, joysticks, and buttons that facilitate the control of the multiple degrees of freedom of the employed end-effectors and appropriate cameras that allow for object detection, identification, and object pose estimation.

A popular solution for connecting different components in modern electronics, such as mobile phones, laptops, tablets, etc, is the use of flexible flat cables (FFC). Typically, it takes hours of repetition from a highly trained worker, or a high precision autonomous robot with specialised end effectors to reliably manage the installation of these cables. Human workers are prone to error, and cannot work endlessly without a break, while the robots often come with a significant expense, and require a substantial amount of time to program and reprogram. Additionally, the use of sophisticated sensing elements further increases the complexity of the required control system. As a result, the performance and robustness of such systems is far from sufficient, hindering their mass adoption. The manipulation of FFCs is also quite challenging. In this work, we focus on the robotic manipulation of a plethora of flexible cables, proposing a multi-modal gripper with locally-dexterous tips and active fingernails. The fingers of the gripper are equipped with: i) locally-dexterous fingertips that accommodate manipulation-capable degrees of freedom, ii) a combination of Nitinol-based active fingernails and suction cups that allow picking up and handling of cables that rest on flat surfaces, and iii) compliant finger-pads that conform to the object surface to increase grasping stability. The proposed robotic gripper is equipped with a camera and a perception system that allow for the execution of complex cable manipulation and assembly tasks in dynamic environments.

Flexible flat cables (FFC) are very popular for connecting different components in modern electronics (e.g., mobile phones, laptops, tablets, etc.). The manipulation of FFCs typically relies on highly trained workers that spend hours performing the same repetitive processes, or on autonomous robotic systems that are equipped with simple clamping mechanisms or pneumatically driven suction cups. Such robotic systems are difficult to program and reprogram and often rely on sophisticated sensing elements and complicated control laws. Moreover, the performance and robustness of such systems is far from sufficient, hindering their mass adoption. The manipulation of FFCs is also quite challenging. A good gripper should be able to pinch the cable steadily and execute insertion tasks of the cable connector with ease. The suction cup based solution is a good approach for holding the cable, but it makes the cable connector insertion very challenging as it can only apply limited shear forces. In this paper, we propose a locally-adaptive, pneumatic, parallel-jaw robot gripper equipped with fingertips that are able to both pinch the cable with a soft clamping mechanism and roll the cable surface on the soft fingertip structure until it reaches the desired connector. The gripper base accommodates a camera that allows for the recognition and pose estimation of the flat, flexible cables and other electronic components. The gripper is of low-cost and low-complexity and it can facilitate the efficient and robust execution of FFC grasping and assembly tasks.

With an increasing number of robotic and prosthetic devices, there is a need for intuitive interfaces which enable the user to efficiently interact with them. The conventional interfaces are generally bulky and unsuitable for dynamic and unstructured environments. An alternative to the traditional interfaces is the class of Muscle-Machine Interfaces (MuMIs) that allow the user to have an embodied interaction with the devices they are controlling. In this work, we present a wearable, lightweight, Forcemyography (FMG) based armband for Human-Machine Interaction fabricated entirely out of 3D-printed parts and silicone components. The armband uses six force sensing units, each housing an Force Sensitive Resistor (FSR) sensor. The capabilities of the armband are evaluated while decoding four different gestures (pinch, power, tripod, extension) and rest state and its performance is compared with a state-of-the-art Electromyography (EMG) bioamplifier. The decoding performance of the decoding models trained on the data acquired from the armband is significantly better than the performance of the models trained on raw EMG data. The hardware design and the related processing software, are disseminated in an open-source manner.

Robot grasping and dexterous, in-hand manipulation allow robots to interact with their surroundings and execute a plethora of complex tasks such as pushing buttons, opening doors, and interacting with electrical appliances. In robotics, such complicated tasks are typically executed by multi-fingered end-effectors that are heavy, rigid, and expensive, employing numerous degrees of freedom and actuation. In this paper, we focus on the analysis, design, and development of a multi-grasp, reconfigurable, five fingered, anthropomorphic robot hand that can facilitate the execution of both robust grasping and dexterous manipulation tasks in service robotics and industrial automation applications. The robot hand is composed of eight actuators driving eighteen degrees of freedom with a telescoping mechanism and opposable thumb and pinky fingers to produce multiple anthropomorphic and non-anthropomorphic configurations for grasping and manipulation tasks. The reconfigurable finger base frames allow the hand to transform and utilize its degrees of actuation in an optimal manner to overcome its underactuated limitations. The underactuated robot hand is designed with a human hand structure that takes advantage of objects specifically designed for human operation (e.g., tool or handles with ergonomics for the human hand). This allows the system to better operate within a human-centered environment. The effectiveness of the proposed device is experimentally validated through three different tests: i) grasping experiments involving everyday-life objects, ii) force experiments that assess the force exertion capabilities of the hand in different finger base frame configurations, and iii) demonstration of in-hand object manipulation capabilities. The proposed hand weighs 1.28 kg and has a cost of approximately $1920 USD. The device is capable of exerting up to 14.3 N of contact force during pinch grasping and a maximum of 150.6 N power grasping.