Network pruning and quantization are proven to be effective ways for deep model compression. To obtain a highly compact model, most methods first perform network pruning and then conduct quantization based on the pruned model. However, this strategy may ignore that the pruning and quantization would affect each other and thus performing them separately may lead to sub-optimal performance. To address this, performing pruning and quantization jointly is essential. Nevertheless, how to make a trade-off between pruning and quantization is non-trivial. Moreover, existing compression methods often rely on some pre-defined compression configurations (i.e., pruning rates or bitwidths). Some attempts have been made to search for optimal configurations, which however may take unbearable optimization cost. To address these issues, we devise a simple yet effective method named Single-path Bit Sharing (SBS) for automatic loss-aware model compression. To this end, we consider the network pruning as a special case of quantization and provide a unified view for model pruning and quantization. We then introduce a single-path model to encode all candidate compression configurations, where a high bitwidth value will be decomposed into the sum of a lowest bitwidth value and a series of re-assignment offsets. Relying on the single-path model, we introduce learnable binary gates to encode the choice of configurations and learn the binary gates and model parameters jointly. More importantly, the configuration search problem can be transformed into a subset selection problem, which helps to significantly reduce the optimization difficulty and computation cost. In this way, the compression configurations of each layer and the trade-off between pruning and quantization can be automatically determined. Extensive experiments on CIFAR-100 and ImageNet show that SBS significantly reduces computation cost while achieving promising performance. For example, our SBS compressed MobileNetV2 achieves 22.6× Bit-Operation (BOP) reduction with only 0.1% drop in the Top-1 accuracy.

End-to-end text-spotting, which aims to integrate detection and recognition in a unified framework, has attracted increasing attention due to its simplicity of the two complimentary tasks. It remains an open problem especially when processing arbitrarily-shaped text instances. Previous methods can be roughly categorized into two groups: character-based and segmentation-based, which often require character-level annotations and/or complex post-processing due to the unstructured output. Here, we tackle end-to-end text spotting by presenting Adaptive Bezier Curve Network v2 (ABCNet v2). Our main contributions are four-fold: 1) For the first time, we adaptively fit arbitrarily-shaped text by a parameterized Bezier curve, which, compared with segmentation-based methods, can not only provide structured output but also controllable representation. 2) We design a novel BezierAlign layer for extracting accurate convolution features of a text instance of arbitrary shapes, significantly improving the precision of recognition over previous methods. 3) Different from previous methods, which often suffer from complex post-processing and sensitive hyper-parameters, our ABCNet v2 maintains a simple pipeline with the only post-processing non-maximum suppression (NMS). 4) As the performance of text recognition closely depends on feature alignment, ABCNet v2 further adopts a simple yet effective coordinate convolution to encode the position of the convolutional filters, which leads to a considerable improvement with negligible computation overhead. Comprehensive experiments conducted on various bilingual (English and Chinese) benchmark datasets demonstrate that ABCNet v2 can achieve state-of-the-art performance while maintaining very high efficiency. More importantly, as there is little work on quantization of text spotting models, we quantize our models to improve the inference time of the proposed ABCNet v2. This can be valuable for real-time applications. Code and model are available at: https://git.io/AdelaiDet.

In this paper, we find that the conventional convolution operation becomes the bottleneck for extremely efficient binary neural networks (BNNs). To address this issue, we open up a new direction by introducing a reshaped point-wise convolution (RPC) to replace the conventional one to build BNNs. Specifically, we conduct a point-wise convolution after rearranging the spatial information into depth, with which at least$2.25\times $computation reduction can be achieved. Such an efficient RPC allows us to explore more powerful representational capacity of BNNs under a given computation complexity budget. Moreover, we propose to use a balanced activation (BA) to adjust the distribution of the scaled activations after binarization, which enables significant performance improvement of BNNs. After integrating RPC and BA, the proposed network, dubbed as RB-Net, strikes a good trade-off between accuracy and efficiency, achieving superior performance with lower computational cost against the state-of-the-art BNN methods. Specifically, our RB-Net achieves 66.8% Top-1 accuracy with ResNet-18 backbone on ImageNet, exceeding the state-of-the-art Real-to-Binary Net (65.4%) by 1.4% while achieving more than$3\times $reduction (52M vs. 165M) in computational complexity.

Binary Neural Networks (BNNs) have received significant attention due to the memory and computation efficiency recently. However, the considerable accuracy gap between BNNs and their full-precision counterparts hinders BNNs to be deployed to resource-constrained platforms. One of the main reasons for the performance gap can be attributed to the frequent weight flip, which is caused by the misleading weight update in BNNs. To address this issue, we propose a state-aware binary neural network (SA-BNN) equipped with the well designed state-aware gradient. Our SA-BNN is inspired by the observation that the frequent weight flip is more likely to occur, when the gradient magnitude for all quantization states {-1,1} is identical. Accordingly, we propose to employ independent gradient coefficients for different states when updating the weights. Furthermore, we also analyze the effectiveness of the state-aware gradient on suppressing the frequent weight flip problem. Experiments on ImageNet show that the proposed SA-BNN outperforms the current state-of-the-arts (e.g., Bi-Real Net) by more than 3% when using a ResNet architecture. Specifically, we achieve 61.7%, 65.5% and 68.7% Top-1 accuracy with ResNet-18, ResNet-34 and ResNet-50 on ImageNet, respectively.

Network quantization allows inference to be conducted using low-precision arithmetic for improved inference efficiency of deep neural networks on edge devices. However, designing aggressively low-bit (e.g., 2-bit) quantization schemes on complex tasks, such as object detection, still remains challenging in terms of severe performance degradation and unverifiable efficiency on common hardware. In this paper, we propose an Accurate Quantized object Detection solution, termed AQD, to fully get rid of floating-point computation. To this end, we target using fixed-point operations in all kinds of layers, including the convolutional layers, normalization layers, and skip connections, allowing the inference to be executed using integer-only arithmetic. To demonstrate the improved latency-vs-accuracy trade-off, we apply the proposed methods on RetinaNet and FCOS. In particular, experimental results on MS-COCO dataset show that our AQD achieves comparable or even better performance compared with the full-precision counterpart under extremely low-bit schemes, which is of great practical value. Source code and models are available at: https://github.com/aim-uofa/model-quantization

Ternary Neural Networks (TNNs) have received much attention due to being potentially orders of magnitude faster in inference, as well as more power efficient, than full-precision counterparts. However, 2 bits are required to encode the ternary representation with only 3 quantization levels leveraged. As a result, conventional TNNs have similar memory consumption and speed compared with the standard 2-bit models, but have worse representational capability. Moreover, there is still a significant gap in accuracy between TNNs and full-precision networks, hampering their deployment to real applications. To tackle these two challenges, in this work, we first show that, under some mild constraints, computational complexity of the ternary inner product can be reduced by 2×. Second, to mitigate the performance gap, we elaborately design an implementation-dependent ternary quantization algorithm. The proposed framework is termed Fast and Accurate Ternary Neural Networks (FATNN). Experiments on image classification demonstrate that our FATNN surpasses the state-of-the-arts by a significant margin in accuracy. More importantly, speedup evaluation compared with various precision is analyzed on several platforms, which serves as a strong benchmark for further research. Source code and models are available at: https://github.com/MonashAI/QTool

With the rising popularity of intelligent mobile devices, it is of great practical significance to develop accurate, real-time and energy-efficient image Super-Resolution (SR) methods. A prevailing method for improving inference efficiency is model quantization, which allows for replacing the expensive floating-point operations with efficient bitwise arithmetic. To date, it is still challenging for quantized SR frameworks to deliver a feasible accuracy-efficiency trade-off. Here, we propose a Fully Quantized image Super-Resolution framework (FQSR) to jointly optimize efficiency and accuracy. In particular, we target obtaining end-to-end quantized models for all layers, especially including skip connections, which was rarely addressed in the literature of SR quantization. We further identify obstacles faced by low-bit SR networks and propose a novel method to counteract them accordingly. The difficulties are caused by 1) for SR task, due to the existence of skip connections, high-resolution feature maps would occupy a huge amount of memory spaces; 2) activation and weight distributions being vastly distinctive in different layers; 3) the inaccurate approximation of the quantization. We apply our quantization scheme on multiple mainstream super-resolution architectures, including SRResNet, SRGAN and EDSR. Experimental results show that our FQSR with low-bits quantization is able to achieve on par performance compared with the full-precision counterparts on five benchmark datasets and surpass the state-of-the-art quantized SR methods with significantly reduced computational cost and memory consumption. Code is available at https://git.io/JWxPp.