In this paper, we present a 10T SRAM compute-in memory (CiM) macro to process the multiplication-accumulation (MAC) operations between ternary-inputs and binary-weights. In the proposed 10T SRAM bitcell, the charge-domain analog computations are employed to improve the noise tolerance of bit-line (BL) signals where the MAC results are represented in CiM. Parallel processing of 3 different analog levels for ternary input activations is also performed in the proposed single 10T bitcell. To reduce the analog-to-digital converter (ADC) bit-resolutions without sacrificing deep neural network (DNN) accuracies, a confined-slope non-uniform integration (CS-NUI) ADC is proposed, which can provide layer-wise adaptive quantization for multiple different layers with different MAC distributions. In addition, by sharing the ADC reference voltage generator in every single column of SRAM array, the ADC area is effectively reduced with improved energy efficiencies of CiM. The$256\times 64.10\text{T}$SRAM CiM macro with the proposed charge-sharing scheme and CS-NUI ADCs has been implemented using 28nm CMOS process. The silicon measurement results show that the proposed CiM shows the accuracies of 98.66% and 88.48% with MNIST dataset on MLP, and CIFAR-10 dataset on VGGNet-7, respectively, with the energy efficiency of 2941-TOPS/W and the area efficiency of 59.584-TOPS/mm2.

This paper presents a charge-sharing based customized 8T SRAM in-memory computing (IMC) architecture. In the proposed IMC approach, the multiply-accumulate (MAC) operation of multi-bit activations and weights is supported using the charge sharing between bit-line (BL) parasitic capacitances. The area-efficient customized 8T SRAM macro can achieve robust and voltage-scalable MAC operations due to the charge-domain computation. We also propose a split capacitor structure-based 5/6-bit reconfigurable successive approximation register analog-to-digital converter (SAR-ADC) to reduce the hardware cost of an analog readout circuit while supporting higher precision MAC operations. The proposed reconfigurable SAR-ADC has been exploited to implement layer-by-layer mixed bit-precisions in convolution layer for increasing energy efficiency with negligible accuracy loss. The 256×64 8T SRAM IMC macro has been implemented using 28nm CMOS process technology. The proposed SRAM macro achieves 11. 20-TOPS/W with a maximum clock frequency of 125MHz at 1. 0V. It also supports supply voltage scaling from 0.5V to 1.1V with the energy efficiency ranging from 8.3-TOPS/W to 35.4-TOPS/W within 1 % accuracy loss.

This paper presents 6T SRAM cell-based bit-parallel in-memory computing (IMC) architecture to support various computations with reconfigurable bit-precision. In the proposed technique, bit-line computation is performed with a short WL followed by BL boosting circuits, which can reduce BL computing delays. By per-forming carry-propagation between each near-memory circuit, bit-parallel complex computations are also enabled by iterating operations with low latency. In addition, reconfigurable bit-precision is also supported based on carry-propagation size. Our 128KB in/near memory computing architecture has been implemented using a 28nm CMOS process, and it can achieve 2.25GHz clock frequency at 0.9V with 5.2% of area overhead. The proposed architecture also achieves 0.68, 8.09 TOPS/W for the parallel addition and multiplication, respectively. In addition, the proposed work also supports a wide range of supply voltage, from 0.6V to 1.1V.