Frost accumulation on refrigerator evaporator coils is a significant source of wasted energy. While automatic de-frosting is a standard feature on modern refrigerators, current commercial solutions use heuristics to determine the frequency of heating cycles, leading to a sub-optimal defrosting routine. The majority of previous defrosting research incorporates cameras or microwave technology to better inform defrost algorithms of frost accumulation, however, these methods are both financially and computationally expensive. In this paper, we propose a low-cost frost detection system using ultrasonic resonance of piezoelectric sensors. We addressed the financial and computational cost challenges by using low-cost sensors and basic circuit components to replace software complexity. Our frost detection system was evaluated extensively in a Samsung refrigerator, resulting in a frost detection accuracy of 99.7%. We believe our solution can be further used for downstream refrigerator control cycle optimizations to achieve improved energy efficiency.

Contact sensing and localization capabilities that mimic human skin are highly desirable for robots. In this paper, we introduce AcouSkin, an acoustic wave based full surface contact localization system. Acoustic waves produced by piezoelectric transceivers using a monotone are coupled to surfaces turning them into an active sensor. Our system leverages information from four piezoelectric transceivers mounted on the surface of an acrylic sheet and vacuum cleaner robot bumper to localize contacts to 18 unique segments. We first characterize acoustic wave propagation based on signal and material properties and then propose hardware and software methods to realize full surface contact localization. Our results show that AcouSkin can reliably localize contact on a flat acrylic sheet with 18 uniformly spaced locations across a 54cm length with mean absolute error (MAE) of ≤ 1 locations using maximum likelihood estimator (MLE) and multilayer perceptron (MLP) models. On the vacuum cleaner robot bumper AcouSkin shows a zero MAE. Further, the system is also able to localize contacts made using forces as low as 2N (Newtons) and as high as 20N. Overall, AcouSkin provides full surface contact localization while requiring minimal instrumentation with easy deployment on real-world robots.

Humans have the ability to pour various media, both liquid and granular, to desired ends in various containers. We do this by using multiple senses simultaneously in a constant feedback loop to complete a pouring task. Combining multiple sensing modalities, similar to humans, could aid in robotic pouring control outside of a structured or industrial setting. We present a multi-sensory pouring dataset consisting of human pouring demonstrations of various granular media, coupled with two multi-sensory networks that estimate pouring rate and pouring average height. For both pouring metrics, a combined input of audio and visual data provides a lower median error than either the audio network or visual network. The multi-sensory network achieves a median error of 6.4 mm for average height estimation and 0.06 N/s for pouring rate estimation.