Wave-based human tracking is a key enabling technology for smart applications. Most of the existing works on this topic employ the conventional approach of device-free object localization, which treat any person as a general moving target rather than distinguish different persons. As a result, the existing approaches have poor performance in the scenarios of multi-person tracking, especially when there are crossovers among different persons’ trajectories. This paper presents mMTAI, a novel approach for multi-person tracking with a mmWave radar. By exploiting mmWave sensing to capture a human’s biometric features, MMTAI augments mmWave radar based human tracking with the ability of identifying different persons. Specifically, MMTAI is able to sense persons’ scalp responses to the signals and their head-shoulder distances, which are then continuously mapped to their trajectories using a bipartite matching algorithm. We implement MMTAI with a commercial mmWave radar and evaluate its performance under various settings. The results show that in the multi-person tracking scenarios, mmTAI has a median tracking error of 12.33 cm, which is $35.88 \%$ lower than that of the state-of-the-art approach.

With the increasing prevalence of IoT devices and smart systems in daily life, there is a growing demand for new modalities in Human-Computer Interaction (HCI) to improve accessibility, particularly for users who require hands-free and eyes-free interaction in contexts like VR environments, as well as for individuals with special needs or limited mobility. In this paper, we propose teeth gestures as an input modality for HCI. We find that teeth gestures, such as tapping, clenching, and sliding, are generated by various facial muscle movements that are often imperceptible to the naked eye but can be effectively captured using mm-wave radar. By capturing and analyzing the distinct patterns of these muscle movements, we propose a hands-free and eyes-free HCI solution based on three different gestures. Key challenges addressed in this paper include user range identification amidst background noise and other irrelevant facial movements. Results from 16 volunteers demonstrate the robustness of our approach, achieving 93% accuracy for up to a 2.5m range.

Backscatter communication holds potential for ubiquitous and low-cost connectivity among low-power IoT devices. To avoid interference between the carrier signal and the backscatter signal, recent works propose a frequency-shifting technique to separate these two signals in the frequency domain. Such proposals, however, have to occupy the precious wireless spectrum that is already overcrowded, and increase the power, cost, and complexity of the backscatter tag. In this paper, we revisit the classic ON-OFF Keying (OOK) modulation and propose Aloba, a backscatter system that takes the ambient LoRa transmissions as the excitation and piggybacks the in- band OOK modulated signals over the LoRa transmissions. Our design enables the backscatter signal to work in the same frequency band of the carrier signal, meanwhile achieving flexible data rate at different transmission range. The key contributions of Aloba include: i) the design of a low-power backscatter tag that can pick up the ambient LoRa signals from other signals; ii) a novel decoding algorithm to demodulate both the carrier signal and the backscatter signal from their superposition. We further adopt link coding mechanism and interleave operation to enhance the reliability of backscatter signal decoding. We implement Aloba and conduct head-to-head comparison with the state-of-the-art LoRa backscatter system PLoRa in various settings. The experiment results show Aloba can achieve 39.5–199.4 Kbps data rate at various distances, 10.4–$52.4\times $higher than PLoRa.

Backscatter communication holds potential for ubiquitous and low-cost connectivity among low-power IoT devices. To avoid interference between the carrier signal and the backscatter signal, recent works propose a frequency-shifting technique to separate these two signals in the frequency domain. Such proposals, however, have to occupy the precious wireless spectrum that is already overcrowded, and increase the power, cost, and complexity of the backscatter tag. In this paper, we revisit the classic ON-OFF Keying (OOK) modulation and propose Aloba, a backscatter system that takes the ambient LoRa transmissions as the excitation and piggybacks the in-band OOK modulated signals over the LoRa transmissions. Our design enables the backsactter signal to work in the same frequency band of the carrier signal, meanwhile achieving good tradeoff between transmission range and link throughput. The key contributions of Aloba include: i) the design of a low-power backscatter tag that can pick up the ambient LoRa signals from other signals; ii) a novel decoding algorithm to demodulate both the carrier signal and the backscatter signal from their superposition. The design of Aloba completely unleashes the backscatter tag's ability in OOK modulation and achieves flexible data rate at different transmission range. We implement Aloba and conduct head-to-head comparison with the state-of-the-art LoRa backscatter system PLoRa in various settings. The experiment results show Aloba can achieve 39.5--199.4 Kbps data rate at various distances, 10.4--52.4X higher than PLoRa.