Energy-centric design is paramount in the current embedded computing era: use cases require increasingly high performance at an affordable power budget, often under real-time constraints. Hardware heterogeneity and parallelism help address the efficiency challenge, but greatly complicate online power consumption assessments, which are essential for dynamic hardware and software stack adaptations. We introduce a novel power modeling methodology with state-of-the-art accuracy, low overhead, and high responsiveness, whose implementation does not rely on microarchitectural details. Our methodology identifies the Performance Monitoring Counters (PMCs) with the highest linear correlation to the power consumption of each hardware sub-system, for each Dynamic Voltage and Frequency Scaling (DVFS) state. The individual, simple models are composed into a complete model that effectively describes the power consumption of the whole system, achieving high accuracy and low overhead. Our evaluation reports an average estimation error of 7.5 % for power consumption and 1.3 % for energy. We integrate these models in the Linux kernel with Runmeter, an open-source, PMC-based monitoring framework. Runmeter manages PMC sampling and processing, enabling the execution of our power models at runtime. With a worst-case time overhead of only 0.7 %, Runmeter provides responsive and accurate power measurements directly in the kernel. This information can be employed for actuation policies in workload-aware DVFS and power-aware, closed-loop task scheduling.

Systolic arrays and shared-L1-memory manycore clusters are commonly used architectural paradigms that offer different trade-offs to accelerate parallel workloads. While the first excel with regular dataflow at the cost of rigid architectures and complex programming models, the second are versatile and easy to program but require explicit dataflow management and synchronization. This work aims at enabling efficient systolic execution on shared-L1-memory manycore clusters. We devise a flexible architecture where small and energy-efficient RISC-V cores act as the systolic array’s processing elements (PEs) and can form diverse, reconfigurable systolic topologies through queues mapped in the cluster’s shared memory. We introduce two low-overhead RISC-V instruction set architecture (ISA) extensions for efficient systolic execution, namely Xqueue and queue-linked registers (QLRs), which support queue management in hardware. The Xqueue extension enables single-instruction access to shared-memory-mapped queues, while QLRs allow implicit and autonomous access to them, relieving the cores of explicit communication instructions. We demonstrate Xqueue and QLRs in MemPool, an open-source shared-memory cluster with 256 PEs, and analyze the hybrid systolic-shared-memory architecture’s trade-offs on several digital signal processing (DSP) kernels with diverse arithmetic intensity. For an area increase of just 6%, our hybrid architecture can double MemPool’s compute unit utilization, reaching up to 73%. In typical conditions (TT/0.80 V/25 °C), in a 22-nm FDX technology, our hybrid architecture runs at 600 MHz with no frequency degradation and is up to 65% more energy efficient than the shared-memory baseline, achieving up to 208 GOPS/W, with up to 63% of power spent in the PEs.

Systolic arrays and shared-memory manycore clusters are two widely used architectural templates that offer vastly different trade-offs. Systolic arrays achieve exceptional performance for workloads with regular dataflow at the cost of a rigid architecture and programming model. Shared-memory manycore systems are more flexible and easy to program, but data must be moved explicitly to/from cores. This work combines the best of both worlds by adding a systolic overlay to a general-purpose shared-memory manycore cluster allowing for efficient systolic execution while maintaining flexibility. We propose and implement two instruction set architecture extensions enabling native and automatic communication between cores through shared memory. Our hybrid approach allows configuring different systolic topologies at execution time and running hybrid systolic-shared-memory computations. The hybrid architecture's convolution kernel outperforms the optimized shared-memory one by 18%.