Radio frequency fingerprint identification (RFFI) is an emerging technique for the lightweight authentication of wireless Internet of things (IoT) devices. RFFI exploits deep learning models to extract hardware impairments to uniquely identify wireless devices. Recent studies show deep learning-based RFFI is vulnerable to adversarial attacks. However, effective adversarial attacks against different types of RFFI classifiers have not yet been explored. In this paper, we carried out a comprehensive investigations into different adversarial attack methods on RFFI systems using various deep learning models. Three specific algorithms, fast gradient sign method (FGSM), projected gradient descent (PGD), and universal adversarial perturbation (UAP), were analyzed. The attacks were launched to LoRa-RFFI and the experimental results showed the generated perturbations were effective against convolutional neural networks (CNNs), long short-term memory (LSTM) networks, and gated recurrent units (GRU). We further used UAP to launch practical attacks. Special factors were considered for the wireless context, including implementing real-time attacks, the effectiveness of the attacks over a period of time, etc. Our experimental evaluation demonstrated that UAP can successfully launch adversarial attacks against the RFFI, achieving a success rate of 81.7% when the adversary almost has no prior knowledge of the victim RFFI systems.

Radio frequency fingerprint identification (RFFI) is an emerging device authentication technique that is based on intrinsic hardware impairments. Internet of things (IoT) devices can be identified and classified based on their wireless signals using RFFI. Developing a robust RFFI system that can maintain high classification accuracy across diverse communication scenarios is a critical challenge. In this paper, we proposed a contrastive learning-based RFFI approach to establish a channel-robust system using the spectrogram. Specifically, we leverage contrastive learning in the training stage, which has been implemented with data augmentation techniques to mitigate the influence of channels on RFFI. We carried out extensive experimental evaluations involving a public dataset and a self-collected dataset, both with ten LoRa devices. Utilizing these datasets, the performance of the system has been tested in various channel environments, including stationary, mobile, line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. The results demonstrated that our approach is effective and robust to channel variation, achieving 93% and 82% on static and dynamic channels. respectively.

Radio frequency fingerprint identification (RFFI) is a promising physical layer authentication technique that uses minute hardware imperfections as device fingerprints. However, various interferences, especially noise, can distort the RF fingerprints embedded in transmission signals, thereby limiting the overall system performance. This paper investigates performance improvements in RFFI systems through multi-receiver training, ensemble learning, and stochastic weight averaging (SWA), with a particular focus on noise immunity. Our experimental results show three main results: First, multi-receiver training strategies significantly improve system robustness, achieving up to 24% accuracy improvement. Second, ensemble learning with multiple models can improve prediction stability. Third, SWA can achieve comparable performance to ensemble learning with reduced complexity. These findings provide practical insights for improving RFFI system performance in challenging noise environments, contributing to more reliable wireless device authentication.

Radio frequency fingerprint identification (RFFI) is an emerging method for authenticating Internet of Things (IoT) devices. RFFI exploits the intrinsic and unique hardware imperfections for classifying IoT devices. Deep learning-based RFFI has shown excellent performance. However, there are still remaining research challenges, such as limited public training datasets as well as impacts of channel and receive effects. In this paper, we proposed a three-stage RFFI approach involving contrastive learning-enhanced pretraining, Siamese network-based classification network training, and inference. Specifically, we employed spectrogram as signal representation to decouple the transmitter impairments from channel effects and receiver impairments. We proposed an unsupervised contrastive learning method to pretrain a channel-robust RFF extractor. In addition, the Siamese network-based scheme is enhanced by data augmentation and contrastive loss, which is capable of jointly mitigating the effects of channel and receiver impairments. We carried out a comprehensive experimental evaluation using three public LoRa datasets and one self-collected LoRa dataset. The results demonstrated that our approach can effectively and simultaneously mitigate the effects of channel and receiver impairments. We also showed that pretraining can significantly reduce the required amount of the fine-tuning data. Our proposed approach achieved an accuracy of over 90% in dynamic non-line-of-sight (NLOS) scenarios when there are only 20 packets per device.

The identification of the devices from which a message is received is part of security mechanisms to ensure authentication in wireless communications. Conventional authentication approaches are cryptography-based, which, however, are usually computationally expensive and not adequate in the Internet of Things (IoT), where devices tend to be low-cost and with limited resources. This paper provides a comprehensive survey of physical layer-based device fingerprinting, which is an emerging device authentication for wireless security. In particular, this article focuses on hardware impairment-based identity authentication and channel features-based authentication. They are passive techniques that are readily applicable to legacy IoT devices. Their intrinsic hardware and channel features, algorithm design methodologies, application scenarios, and key research questions are extensively reviewed here. The remaining research challenges are discussed, and future work is suggested that can further enhance the physical layer-based device fingerprinting.

Radio frequency fingerprint identification (RFFI) is a promising physical layer authentication technique that utilizes the unique impairments within the analog front-end of transmitters as distinct identifiers. State-of-the-art RFFI systems are frequently powered by deep learning, which requires extensive training data to ensure satisfactory performance. However, current RFFI studies suffer from a severe lack of training data, which poses challenges in achieving high identification accuracy. In this paper, we propose a federated RFFI system that is particularly suitable for Internet of Things (IoT) networks, which holds a high potential to address the data scarcity challenge in RFFI development. Specifically, all the receivers in an IoT network can pre-train a deep learning-driven feature extractor in a federated and unsupervised manner. Subsequently, a new client can perform fine-tuning on the basis of the pre-trained feature extractor to activate its RFFI functionality. Extensive experimental evaluation was carried out, involving 60 commercial off-the-shelf (COTS) LoRa transmitters and six software-defined radio (SDR) receivers. The experimental results demonstrate that the federated RFFI protocol can effectively improve the identification accuracy from 63% to 95%, and is robust to receiver hardware and location variations.

Radio frequency fingerprint identification (RFFI) is an emerging device authentication technique, which exploits the hardware characteristics of the RF front-end as device identifiers. The receiver hardware impairments interfere with the feature extraction of transmitter impairments, but their effect and mitigation have not been comprehensively studied. In this paper, we propose a receiver-agnostic RFFI system by employing adversarial training to learn the receiver-independent features. Moreover, when there are multiple receivers, collaborative inference are designed to enhance classification accuracy. Finally, we show how it is possible to leverage fine-tuning for further improvement with fewer collected signals. To validate the approach, we have conducted extensive experimental evaluation by applying the approach to a LoRaWAN case study involving ten LoRa devices and 20 software-defined radio (SDR) receivers. The results show that receiver-agnostic training enables the trained neural network to become robust to changes in receiver characteristics. The collaborative inference improves classification accuracy by up to 20% beyond a single-receiver RFFI system and fine-tuning can bring a 40% improvement for underperforming receivers. The system is further evaluated on a more practical testbed. By making additional use of online augmentation and multi-packet inference, the identification accuracy is improved from 50% to 90% at 10 dB.

Wi-Fi sensing can classify human activities because each activity causes unique changes to the channel state information (CSI). Existing WiFi sensing suffers from limited scalability as the system needs to be retrained whenever new classes are added, which causes overheads of data collection and retraining. Cross-domain sensing may fail because the mapping between activities and CSI variations is destroyed when a different environment or user (domain) is involved. This paper proposed a few-shot learning-based WiFi sensing system, named FewSense, which can recognise novel classes in unseen domains with only a few samples. Specifically, a feature extractor was pre-trained offline using the source domain data. When the system was applied in the target domain, a few samples were used to fine-tune the feature extractor for domain adaptation. Inference was made by computing the cosine similarity. FewSense can further boost the classification accuracy by collaboratively fusing inference from multiple receivers. We evaluated the performance of FewSense using three public datasets, i.e., SignFi, Widar, and Wiar. The results show that FewSense with five-shot learning recognised novel classes in unseen domains with an accuracy of 93.9%, 96.5%, and 82.7% on the SignFi, Widar, and Wiar datasets, respectively. Our collaborative sensing model improved system performance by an average of 29.2%.

Radio frequency fingerprint identification (RFFI) is an emerging technique for the lightweight authentication of wireless Internet of things (IoT) devices. RFFI exploits unique hardware impairments as device identifiers, and deep learning is widely deployed as the feature extractor and classifier for RFFI. However, deep learning is vulnerable to adversarial attacks, where adversarial examples are generated by adding perturbation to clean data for causing the classifier to make wrong predictions. Deep learning-based RFFI has been shown to be vulnerable to such attacks, however, there is currently no exploration of effective adversarial attacks against a diversity of RFFI classifiers. In this paper, we report on investigations into white-box attacks (non-targeted and targeted) using two approaches, namely the fast gradient sign method (FGSM) and projected gradient descent (PGD). A LoRa testbed was built and real datasets were collected. These adversarial examples have been experimentally demonstrated to be effective against convolutional neural networks (CNNs), long short-term memory (LSTM) networks, and gated recurrent units (GRU).

Radio frequency fingerprint identification (RFFI) can classify wireless devices by analyzing the signal distortions caused by intrinsic hardware impairments. Recently, state-of-the-art neural networks have been adopted for RFFI. However, many neural networks, e.g., multilayer perceptron (MLP) and convolutional neural network (CNN), require fixed-size input data. In addition, many IoT devices work in low signal-to-noise ratio (SNR) scenarios but the RFFI performance in such scenarios is often unsatisfactory. In this paper, we analyze the reason why MLP- and CNN-based RFFI systems are constrained by the input size. To overcome this, we propose four neural networks that can process signals of variable lengths, namely flatten-free CNN, long short-term memory (LSTM) network, gated recurrent unit (GRU) network, and transformer. We adopt data augmentation during training which can significantly improve the model’s robustness to noise. We compare two augmentation schemes, namely offline and online augmentation. The results show the online one performs better. During the inference, a multi-packet inference approach is further leveraged to improve the classification accuracy in low SNR scenarios. We take LoRa as a case study and evaluate the system by classifying 10 commercial-off-the-shelf LoRa devices in various SNR conditions. The online augmentation can boost the low-SNR classification accuracy by up to 50% and the multi-packet inference approach can further increase the accuracy by over 20%.

Radio frequency fingerprint identification (RFFI) is a promising device authentication technique based on transmitter hardware impairments. The device-specific hardware features can be extracted at the receiver by analyzing the received signal and used for authentication. In this paper, we propose a scalable and channel-robust RFFI framework achieved by deep learning powered radio frequency fingerprint (RFF) extractor and channel independent features. Specifically, we leverage deep metric learning to train an RFF extractor, which has excellent generalization ability and can extract RFFs from previously unseen devices. Any devices can be enrolled via the pre-trained RFF extractor and the RFF database can be maintained efficiently for allowing devices to join and leave. Wireless channel impacts the RFF extraction and is tackled by exploiting channel independent features and data augmentation. We carried out extensive experimental evaluation involving 60 commercial off-the-shelf LoRa devices and a USRP N210 software defined radio platform. The results have successfully demonstrated that our framework can achieve excellent generalization abilities for rogue device detection and device classification as well as effective channel mitigation.

Radio frequency fingerprint identification (RFFI) is an emerging device authentication technique that relies on intrin-sic hardware characteristics of wireless devices. We designed an RFFI scheme for Long Range (LoRa) systems based on spectrogram and convolutional neural network (CNN). Specifically, we used spectrogram to represent the fine-grained time-frequency characteristics of LoRa signals. In addition, we revealed that the instantaneous carrier frequency offset (CFO) is drifting, which will result in misclassification and significantly compromise the system stability; we demonstrated CFO compensation is an effective mitigation. Finally, we designed a hybrid classifier that can adjust CNN outputs with the estimated CFO. The mean value of CFO remains relatively stable, hence it can be used to rule out CNN predictions whose estimated CFO falls out of the range. We performed experiments in real wireless environments using 20 LoRa devices under test (DUTs) and a Universal Software Radio Peripheral (USRP) N210 receiver. By comparing with the IQ-based and FFT-based RFFI schemes, our spectrogram-based scheme can reach the best classification accuracy, i.e., 97.61% for 20 LoRa DUTs.

Radio frequency fingerprint identification (RFFI) is an emerging device authentication technique that relies on the intrinsic hardware characteristics of wireless devices. This paper designs a deep learning-based RFFI scheme for Long Range (LoRa) systems. Firstly, the instantaneous carrier frequency offset (CFO) is found to drift, which could result in misclassification and significantly compromise the stability of the deep learning-based RFFI system. CFO compensation is demonstrated to be effective mitigation. Secondly, three signal representations for deep learning-based RFFI are investigated in time, frequency, and time-frequency domains, namely in-phase and quadrature (IQ) samples, fast Fourier transform (FFT) results and spectrograms, respectively. For these signal representations, three deep learning models are implemented, i.e., multilayer perceptron (MLP), long short-term memory (LSTM) network and convolutional neural network (CNN), in order to explore an optimal framework. Finally, a hybrid classifier that can adjust the prediction of deep learning models with the estimated CFO is designed to further increase the classification accuracy. The CFO will not change dramatically over several continuous days, hence it can be used to correct predictions when the estimated CFO is much different from the reference one. Experimental evaluation is performed in real wireless environments involving 25 LoRa devices and a Universal Software Radio Peripheral (USRP) N210 platform. The spectrogram-CNN model is found to be optimal for classifying LoRa devices which can reach an accuracy of 96.40% with the least complexity and training time.