Teleoperated humanoid robot systems have made substantial advancements in recent years, offering a physical avatar that harnesses human skills and decision-making while safeguarding users from hazardous environments. However, current telelocomotion interfaces often fail to accurately represent the robot's environment, limiting the user's ability to effectively navigate the robot through unstructured terrain. This paper presents an initial telelocomotion framework that integrates the ForceBot locomotion interface with the small-sized humanoid robot, HECTOR V2. The framework utilizes ForceBot to simulate walking motion and estimate the user's Center of Mass (CoM) trajectory, which serves as a tracking reference for the robot. On the robot side, a model predictive control (MPC) approach, based on a reduced-order single rigid body model, is employed to track the user's scaled trajectory. We present experimental results on ForceBot's CoM estimation and the robot's tracking performance, demonstrating the feasibility of this approach.

Current humanoid push-recovery strategies often use whole-body motion, yet they tend to overlook posture regulation. For instance, in manipulation tasks, the upper body may need to stay upright and have minimal recovery displacement. This paper introduces a novel approach to enhancing humanoid push-recovery performance under unknown disturbances and regulating body posture by tailoring the recovery stepping strategy. We propose a hierarchical-MPC-based scheme that analyzes and detects instability in the prediction window and quickly recovers through adapting gait frequency. Our approach integrates a high-level nonlinear MPC, a posture-aware gait frequency adaptation planner, and a low-level convex locomotion MPC. The planners predict the center of mass (CoM) state trajectories that can be assessed for precursors of potential instability and posture deviation. In simulation, we demonstrate improved maximum recoverable impulse by 131 % on average compared with baseline approaches. In hardware experiments, a 125 ms advancement in recovery stepping timing/reflex has been observed with the proposed approach. We also demonstrate improved push-recovery performance and minimized body attitude change under 0.2 rad.

Bipedal locomotion control is essential for humanoid robots to navigate complex, human-centric environments. While optimization-based control designs are popular for integrating sophisticated models of humanoid robots, they often require labor-intensive manual tuning. In this work, we address the challenges of parameter selection in bipedal locomotion control using DiffTune, a model-based autotuning method that leverages differential programming for efficient parameter learning. A major difficulty lies in balancing model fidelity with differentiability. We address this difficulty using a low-fidelity model for differentiability, enhanced by a Ground Reaction Force-and-Moment Network (GRFM-Net) to capture discrepancies between MPC commands and actual control effects. We validate the parameters learned by DiffTune with GRFM-Net in hardware experiments, which demonstrates the parameters’ optimality in a multi-objective setting compared with baseline parameters, reducing the total loss by up to 40.5% compared with the expert-tuned parameters. The results confirm the GRFM-Net’s effectiveness in mitigating the sim-to-real gap, improving the transferability of simulation-learned parameters to real hardware.

This paper proposes a novel approach to controlling wheel-legged quadrupedal robots using pose optimization and force-based control via quadratic programming (QP). Our method allows the robot to leverage the whole-body motion and the wheel actuation to roll over high obstacles while keeping wheel traction with the terrain. In detail, we first present linear rigid body dynamics with wheels that can be used for real-time balancing control of wheel-legged robots. We then introduce an effective pose optimization method for wheel-legged robot's locomotion over steep ramp and stair terrains. The pose optimization solves for optimal poses to enhance stability and enforce collision-free constraints at critical pose locations for rolling over high obstacles. Experimental validation of the real robot demonstrated the capability of rolling up on a 0.36 m obstacle. The robot can also successfully roll up and down multiple stairs without lifting its legs or colliding with the terrain.